3www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999
Features and Application
Series I
Features and Application
MIL-DTL-38999 Series I is a bayonet coupling subminiture
conguration with high contact density, ideal for smaller wire
gauge, general-purpose applications. ese environment-
resisting connectors are 100% “scoop-proof.” Pins are
recessed in elongated shells to prevent the possibility of
bending contacts when plugs are scooped into the mating
receptacles.
is family of connectors is oered in 5 receptacle-mounting
styles. ey include square ange receptacles, for both front
and rear panel (wall) mounting; square ange receptacles, for
both front and rear box mounting; and jam nut receptacles
which incorporate “O” ring seals, designed for rear panel
“D” hole mounting.
Standard plugs provide RFI protection by incorporating a
continuous strip of attached grounding ngers attenuating
interference up to 1 GHz.
Fiy-seven insert arrangements per MIL-STD-1560 are
tooled and qualied to MIL-DTL-38999 Series I, utilizing
2 to 128 contacts. Contacts come in sizes 22M, 22D, 20, 16,
12, and 8 (coax and twinax), terminating wire sizes from 28
gauge to 12 gauge including coaxial cable.
ese connectors are available in wide range of shell materials
and nishes. Aluminum shells are oered in electroless nickel,
olive drab cadmium and bright cadmium. Other nishes
such as anodic and zinc cobalt are available upon request to
commercial callouts only. In addition, we oer passivated
stainless steel shells with standard environment-resisting
inserts (commercial callouts only), and for highly corrosive
environments, nickel-aluminum-bronze shells with standard
environment-resisting inserts (commercial callouts only).
Universal I/R Tool – A single, expendable plastic tool is
used for both insertion and removal of contacts.
Scoop-Proof Design – Recessed pins in elongated shells
minimize the possibility for contact damage. In a blind
mating application, mating shells cannot “scoop” the pins,
and cause a shorting or bending of contacts.
Closed-Entry Socket Insert – Hard dielectric socket face
has lead-in chamfers for positive alignment of pins (even
partially bent within pre-established limits) with sockets.
Interfacial Pin Insert Seal – Raised moisture barriers
around each pin, which mate into lead-in chamfers of hard
face socket insert, provide individual contact sealing.
Interfacial seal is never touched by service tools.
Elastomer Wire Sealing Grommet – Sealing over a wide
range of wire diameters is assured by a triple wire seal in
each cavity at the rear of the connector.
Superior Contact Stability – Rear release crimp contact
system features a stamped beryllium-copper retaining clip
captivated by molded-in shoulders of each contact cavity in
the insulator. A rear-inserted M81969 plastic tool expands
the tines beyond the shoulder, releasing the contact.
Shell Polarization – Alternate key/keyway positions prevent
cross mating of adjacent connectors having identical insert
arrangement.
4www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999
Performance Specications
Series I
Performance Specications
Operating Temperature Range
Finish B: -65°C to +175°C (-85°F to +347°F)
Finish F: -65°C to +200°C (-85°F to +392°F
Finish A: -65°C to +150°C (-85°F to +302°F)
Material and Plating Data (Finish)
B – aluminum shell, olive drab cadmium over nickel base
F – aluminum shell, electroless nickel nish
A – aluminum shell, silver to light iridescent yellow color
(bright) cadmium over electroless nickel
Corrosion Resistance
Finishes A and B withstand 500-hour salt spray.
Finish F withstands 48-hour salt spray.
Durability
Minimum of 500 mating cycles
Environmental Seal
Wired, mated connectors with specied accessories at-
tached, shall meet the altitude-immersion test specied in
MIL-DTL-38999.
Fluid Resistance
Connectors resist specied immersions in MIL-PRF-7808,
MIL-PRF-23699, MIL-PRF-5606, M2-V Chevron oil, Coolanol
25, MIL-DTL-83133 (JP-8), MIL-DTL-5624 (JP-4, JP-5),
SAE-AMS1424 Type I, and other solvents and cleaning agents.
Shell-to-Shell Conductivity
Finish F = 1.0 millivolt maximum potential drop
Finishes A and B = 2.5 millivolts maximum potential drop
Voltage Rating
Shielding Eectiveness
RFI and EMI attenuation at the specied frequencies meet
the requirements of MIL-DTL-38999.
RFI shielding eectiveness of mated connectors with
RFI backshells is measured in a triaxial radio frequency
leakage xture.
EMI shielding eectiveness is measured at the interface
of mated connectors and tested by the mode-stirred
technique specied in method 3008 of MIL-STD-1344.
Shock and Vibration Requirements
Wired, mated connectors shall not be damaged, nor shall
there be a current interruption longer than one microsecond
when subjected to the following:
Standard Shock
Mated connectors withstand a pulse of approximate half
sine wave of 300 G ± 15 percent magnitude with duration of
3 ± 1 milliseconds applied in three axes per MIL-STD-1344,
method 2004.
High Impact Shock
When mounted as specied in MIL-S-901, grade A, a drop
of a 400 lb. Hammer from 1 foot, 3 feet and 5 feet applied to
connector in three axes, totaling nine impacts.
Vibration
Mated connectors, with proper accessories, withstand the
following vibration levels:
Sine Vibration per MIL-STD-202, method 204, test
condition G.
Random Vibration per MIL-STD-1344, method 2005,
test condition V and test condition VI, Letter “J” at ambi-
ent temperature.
Service Rating
Suggested Operating Voltage Test Voltage Test Voltage Test Voltage Test Voltage
(Sea Level) Sea Level 50,000 Ft. 70,000 Ft. 100,000 Ft.
AC (RMS) DC V RMS V RMS V RMS V RMS
M 400 550 1300 550 350 200
N 300 450 1000 400 260 200
I 600 850 1800 600 400 200
II 900 1250 2300 800 500 200
Note: e establishment of electrical safety factors is le
entirely to the designer, as he is in the best position to know
exactly what peak voltages, switching currents, transients,
etc., can be expected in a particular circuit.
5www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999
Part Number Development
Series I
Military and Aero-Electric Part Number Development
Note 1: Each connector is furnished with contacts unless
ordered less contacts (L/C) as follows: One spare contact for
inserts requiring 1 through 26 of each contact and two spares
for inserts with more than 26 contacts and a minimum of
one sealing plug up to 10% of the number of contacts. Spare
Coax and Twinax contacts are not supplied. One insertion/
removal tool for each contact size is also included.
Note 2: Proper part number marking has no “0” in front
of single digit shell size (9) and no “0” in front of single digit
layout. Example of each: J MS27466T9B35S and
J MS27466T11B5S. In both, “N” for normal is omitted. In
addition, J or JAN must now be marked in front of the MS
part number.
Mil. Prex MS 27467 T 13 B 35 P A
Aero Prex AE 167 T 13 B 35 P A -340
Shell Type
27466 = Front, wall mount receptacle = 166 (Aero p/n)
27467 = RFI grounding plug = 167 (Aero p/n)
27468 = Jam nut receptacle = 168 (Aero p/n)
27496 = Front, box mount receptacle = 196 (Aero p/n)
27505 = Rear, box mount receptacle = 105 (Aero p/n)
27656 = Rear, wall mount receptacle = 156 (Aero p/n)
Class
T = With acc. thread (MS27466, MS27467, MS27468 & MS27656)
E = Same as T in line above but is not approved for new design
(E-nut is not included)
= No acc. thread, box mount (MS27496 & MS27505)
Shell Size
9, 11, 13, 15, 17, 19, 21, 23 or 25
Finish (Material & Plating)
A = Aluminum shell, silver to light iridescent yellow color (bright) cadmium over nickel base
B = Aluminum shell, olive drab cadmium over electroless nickel base
F = Aluminum shell, electroless nickel nish
S = Stainless steel shell, passivated (Aero p/n only)
Insert Arrangement
See page 19 thru 21
Contact Style
P = Pin
S = Socket
A = Pin connector less pins (with intent to use non-standard pin contacts)
B = Socket connector less sockets (with intent to use non-standard socket contacts)
Polarization (Keying)
N = Normal (Omitted in part number)
A, B, C, or D (B & C keyways are not available in shell size 9)
Modication (applies to Aero part numbers only)
01 = Less contacts (is not marked on the part)
340 = Connector kitted with M85049/27-XXX E-nut
341 = Connector kitted with M85049/49-2-XXX straight clamp
342 = Connector kitted with M85049/47XXX right angle clamp
Consult factory for other modications
6www.conesys.com sales@aero-electric.com
38999 S I
– –
MS27466
Front, Wall Mounting Receptacle
AE166
Bayonet Coupling, Crimp Removable, Rear Release, Scoop-Proof
H
MAX
GROMMET
B
A
4x C
MASTER KEYWAY
E
BLUE COLOR BAND
J ACCESSORY TEETH
G ACCESSORY THREAD
1.323(33.60)
MAX
D
.219(5.56)
MIN. FULL THREAD
.060(1.52)
MAX GROMMET EXTENSION
F
4X MINOR KEYWAYS
Page 5 Completed Part Number
Page 15 Contacts, Sealing Plugs and Tools
Pages 19–21 Insert Arrangements
Page 4 Performance Specications
Pages 16-18 Insert Availability and Contact Information
Page 13 Polarization
Shell
Size
A B Ø C D Ø E F G Ø H J
+.010 +.25 +.000 +.00 +.001 +.03 +.015 +.38 Accessory No. of
±.020 ±.51 (TP) -.005 -.13 -.005 -.13 -.005 -.13 -.000 -.00 Thread Maximum Teeth
inch mm inch mm inch mm inch mm inch mm inch mm UNEF-2A inch mm
9 .938 23.83 .719 18.26 .128 3.25 .632 16.05 .572 14.53 .085 2.16 7/16-28 .299 7.59 12
11 1.031 26.19 .812 20.62 .128 3.25 .632 16.05 .700 17.78 .085 2.16 9/16-24 .427 10.85 16
13 1.125 28.58 .906 23.01 .128 3.25 .632 16.05 .850 21.59 .085 2.16 11/16-24 .541 13.74 20
15 1.219 30.96 .969 24.61 .128 3.25 .632 16.05 .975 24.77 .085 2.16 13/16-20 .666 16.92 24
17 1.312 33.32 1.062 26.97 .128 3.25 .632 16.05 1.100 27.94 .085 2.16 15/16-20 .791 20.09 28
19 1.438 36.53 1.156 29.36 .128 3.25 .632 16.05 1.207 30.66 .085 2.16 1-1/16-18 .897 22.78 32
21 1.562 39.67 1.250 31.75 .128 3.25 .602 15.29 1.332 33.83 .115 2.92 1-3/16-18 1.022 25.96 36
23 1.688 42.88 1.375 34.93 .147 3.73 .602 15.29 1.457 37.01 .115 2.92 1-5/16-18 1.147 29.13 40
25 1.812 46.02 1.500 38.10 .147 3.73 .602 15.29 1.582 40.18 .115 2.92 1-7/16-18 1.272 32.31 44
7www.conesys.com sales@aero-electric.com
38999 S I
– –
MS27656
Rear, Wall Mounting Receptacle
AE156
Bayonet Coupling, Crimp Removable, Rear Release, Scoop-Proof
Page 5 Completed Part Number
Page 15 Contacts, Sealing Plugs and Tools
Pages 19–21 Insert Arrangements
Page 4 Performance Specications
Pages 16-18 Insert Availability and Contact Information
Page 13 Polarization Note: See page 14 for panel thickness.
H
MAX
GROMMET
J ACCESSORY TEETH
.219 (5.56)
MIN FULL THREAD
.060 (1.52)
MAX GROMMET EXTENSION
G ACCESSORY THREAD
B
A
4x C
MASTER KEYWAY
E
BLUE COLOR BAND
1.350 (34.29)
MAX
D F
4X MINOR KEYWAYS
Shell
Size
A B Ø C DØ E F G Ø H J
+.010 +.25 +.000 +.00 +.001 +.03 +.015 +.38 Accessory No. of
±.020 ±.51 (TP) -.005 -.13 -.005 -.13 -.005 -.13 -.000 -.00 Thread Maximum Teeth
inch mm inch mm inch mm inch mm inch mm inch mm UNEF-2A inch mm
9 .938 23.83 .719 18.26 .128 3.25 .820 20.83 .572 14.53 .085 2.16 7/16-28 .299 7.59 12
11 1.031 26.19 .812 20.62 .128 3.25 .820 20.83 .700 17.78 .085 2.16 9/16-24 .427 10.85 16
13 1.125 28.58 .906 23.01 .128 3.25 .820 20.83 .850 21.59 .085 2.16 11/16-24 .541 13.74 20
15 1.219 30.96 .969 24.61 .128 3.25 .820 20.83 .975 24.77 .085 2.16 13/16-20 .666 16.92 24
17 1.312 33.32 1.062 26.97 .128 3.25 .820 20.83 1.100 27.94 .085 2.16 15/16-20 .791 20.09 28
19 1.438 36.53 1.156 29.36 .128 3.25 .820 20.83 1.207 30.66 .085 2.16 1-1/16-18 .897 22.78 32
21 1.562 39.67 1.250 31.75 .128 3.25 .790 20.07 1.332 33.83 .115 2.92 1-3/16-18 1.022 25.96 36
23 1.688 42.88 1.375 34.93 .147 3.73 .790 20.07 1.457 37.01 .115 2.92 1-5/16-18 1.147 29.13 40
25 1.812 46.02 1.500 38.10 .147 3.73 .790 20.07 1.582 40.18 .115 2.92 1-7/16-18 1.272 32.31 44
8www.conesys.com sales@aero-electric.com
38999 S I
– –
MS27496
Front, Box Mounting Receptacle
AE196
Bayonet Coupling, Crimp Removable, Rear Release, Scoop-Proof
Page 5 Completed Part Number
Page 15 Contacts, Sealing Plugs and Tools
Pages 19–21 Insert Arrangements
Page 4 Performance Specications
Pages 16-18 Insert Availability and Contact Information
Page 13 Polarization
H
MAX
GROMMET
G
MAX
.312(7.93)
MAX
.060(1.52)
MAX GROMMET EXTENSION
B
A
4x C
MASTER KEYWAY
E
BLUE COLOR BAND
1.104(28.04)
MAX
FD
4X MINOR KEYWAYS
Shell
Size
A B Ø C DØ E FØ G Ø H
+.010 +.25 +.000 +.00 +.001 +.03 +.015 +.38
±.020 ±.51 (TP) -.005 -.13 -.005 -.13 -.005 -.13 -.000 -.00 Maximum Maximum
inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm
9 .938 23.83 .719 18.26 .128 3.25 .632 16.05 .572 14.53 .085 2.16 .469 11.91 .299 7.59
11 1.031 26.19 .812 20.62 .128 3.25 .632 16.05 .700 17.78 .085 2.16 .594 15.09 .427 10.85
13 1.125 28.58 .906 23.01 .128 3.25 .632 16.05 .850 21.59 .085 2.16 .719 18.26 .541 13.74
15 1.219 30.96 .969 24.61 .128 3.25 .632 16.05 .975 24.77 .085 2.16 .844 21.44 .666 16.92
17 1.312 33.32 1.062 26.97 .128 3.25 .632 16.05 1.100 27.94 .085 2.16 .969 24.61 .791 20.09
19 1.438 36.53 1.156 29.36 .128 3.25 .632 16.05 1.207 30.66 .085 2.16 1.078 27.38 .897 22.78
21 1.562 39.67 1.250 31.75 .128 3.25 .602 15.29 1.332 33.83 .115 2.92 1.203 30.56 1.022 25.96
23 1.688 42.88 1.375 34.93 .147 3.73 .602 15.29 1.457 37.01 .115 2.92 1.328 33.73 1.147 29.13
25 1.812 46.02 1.500 38.10 .147 3.73 .602 15.29 1.582 40.18 .115 2.92 1.453 36.91 1.272 32.31
9www.conesys.com sales@aero-electric.com
38999 S I
– –
MS27505
Rear, Box Mounting Receptacle
AE105
Bayonet Coupling, Crimp Removable, Rear Release, Scoop-Proof
Page 5 Completed Part Number
Page 15 Contacts, Sealing Plugs and Tools
Pages 19–21 Insert Arrangements
Page 4 Performance Specications
Pages 16-18 Insert Availability and Contact Information
Page 13 Polarization
H
MAX
GROMMET
G
MAX
.060(1.52)
MAX GROMMET EXTENSION
B
A
4x C
MASTER KEYWAY
E
BLUE COLOR BAND
1.100(27.94)
MAX
D F
4X MINOR KEYWAYS
Shell
Size
A B Ø C DØ E FØ G Ø H
+.010 +.25 +.000 +.00 +.001 +.03 +.015 +.38
±.020 ±.51 (TP) -.005 -.13 -.005 -.13 -.005 -.13 -.000 -.00 Maximum Maximum
inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm
9 .938 23.83 .719 18.26 .128 3.25 .820 20.83 .572 14.53 .085 2.16 .547 13.89 .299 7.59
11 1.031 26.19 .812 20.62 .128 3.25 .820 20.83 .700 17.78 .085 2.16 .656 16.66 .427 10.85
13 1.125 28.58 .906 23.01 .128 3.25 .820 20.83 .850 21.59 .085 2.16 .828 21.03 .541 13.74
15 1.219 30.96 .969 24.61 .128 3.25 .820 20.83 .975 24.77 .085 2.16 .953 24.21 .666 16.92
17 1.312 33.32 1.062 26.97 .128 3.25 .820 20.83 1.100 27.94 .085 2.16 1.078 27.38 .791 20.09
19 1.438 36.53 1.156 29.36 .128 3.25 .820 20.83 1.207 30.66 .085 2.16 1.203 30.56 .897 22.78
21 1.562 39.67 1.250 31.75 .128 3.25 .790 20.07 1.332 33.83 .115 2.92 1.328 33.73 1.022 25.96
23 1.688 42.88 1.375 34.93 .147 3.73 .790 20.07 1.457 37.01 .115 2.92 1.453 36.91 1.147 29.13
25 1.812 46.02 1.500 38.10 .147 3.73 .790 20.07 1.582 40.18 .115 2.92 1.578 40.08 1.272 32.31
Note: See page 14 for panel thickness.
10www.conesys.com sales@aero-electric.com
38999 S I
– –
MS27468
Jam Nut Receptacle
AE168
Bayonet Coupling, Crimp Removable, Rear Release, Scoop-Proof
Page 5 Completed Part Number
Page 15 Contacts, Sealing Plugs and Tools
Pages 19–21 Insert Arrangements
Page 4 Performance Specications
Pages 16-18 Insert Availability and Contact Information
Page 13 Polarization
PANEL THICKNESS
.125(3.18)
.062(1.57)
Ø D
3X BAYONET PINS
EQUALLY SPACED
MASTER KEYWAY
E
BLUE COLOR BAND
4X MINOR KEYWAYS
"O"-RING
K
FLAT
Ø A
HEX NUT
PER MS3186
J THREAD
1.308 (33.22)
MAX
.615 (15.62)
.598 (15.19)
.920 (23.37)
.910 (23.11)
BLUE COLOR BAND
G No. OF TEETH
F ACCESSORY THREAD
Ø C
MAX
GROMMET
.060 (1.52) MAX
GROMMET EXTENSION
B
Shell
Size
Ø A BØ C Ø D E F G J K
+.001 +.03 +.011 +.28 Accessory No. of Jam Nut Thread Flat
-.005 -.13 -.010 -.25 Maximum ±.016 ±.41 ±.016 ±.41 Thread Teeth Class 2A ±.005 ±.13
inch mm inch mm inch mm inch mm inch mm UNEF- 2A inch mm
9 .572 14.53 .109 2.77 .299 7.59 1.188 30.18 1.062 26.97 7/16-28 12 11/16-24UNEF .650 16.51
11 .700 17.78 .109 2.77 .427 10.85 1.375 34.93 1.250 31.75 9/16-24 16 13/16-20UNEF .750 19.05
13 .850 21.59 .109 2.77 .541 13.74 1.500 38.10 1.375 34.93 11/16-24 20 1-20UNEF .937 23.80
15 .975 24.77 .109 2.77 .666 16.92 1.625 41.28 1.500 38.10 13/16-20 24 1-1/8-18UNEF 1.061 26.95
17 1.100 27.94 .109 2.77 .791 20.09 1.750 44.45 1.625 41.28 15/16-20 28 1-1/4-18UNEF 1.186 30.12
19 1.207 30.66 .140 3.56 .897 22.78 1.938 49.23 1.812 46.02 1-1/16-18 32 1-3/8-18UNEF 1.311 33.30
21 1.332 33.83 .140 3.56 1.022 25.96 2.062 52.37 1.938 49.23 1-3/16-18 36 1-1/2-18UNEF 1.436 36.47
23 1.457 37.01 .140 3.56 1.147 29.13 2.188 55.58 2.062 52.37 1-5/16-18 40 1-5/8-18UNEF 1.561 39.65
25 1.582 40.18 .140 3.56 1.272 32.31 2.312 58.72 2.188 55.58 1-7/16-18 44 1-3/4-18UNS 1.686 42.82
11www.conesys.com sales@aero-electric.com
38999 S I
– –
MS27467
RFI Grounding Plug
AE167
Bayonet Coupling, Crimp Removable, Rear Release, Scoop-Proof
Page 5 Completed Part Number
Page 15 Contacts, Sealing Plugs and Tools
Pages 19–21 Insert Arrangements
Page 4 Performance Specications
Pages 16-18 Insert Availability and Contact Information
Page 13 Polarization
GROMMET
EXTENSION
D No. OF TEETH
A
MIN C
MAX
GROMMET
F MAX.
COUPLING NUT
E ACCESSORY THREAD
.219(5.56) MIN
FULL THREAD
BLUE COLOR BAND
4 MINOR KEYS
MASTER KEY
RFI STRIP
1.294
(32.87)
MAX
.060(1.52)
MAX
Shell
Size
Ø A Ø C D E Ø F
No. of Accessory Thread
Minimum Maximum Teeth Class 2A Maximum
inch mm inch mm inch mm
9 .417 10.59 .299 7.59 12 7/16-28UNEF .859 21.82
11 .545 13.84 .427 10.85 16 9/16-24UNEF .984 24.99
13 .657 16.69 .541 13.74 20 11/16-24UNEF 1.156 29.36
15 .782 19.86 .666 16.92 24 13/16-20UNEF 1.281 32.54
17 .907 23.04 .791 20.09 28 15/16-20UNEF 1.406 35.71
19 1.012 25.70 .897 22.78 32 1-1/16-18UNEF 1.516 38.51
21 1.137 28.88 1.022 25.96 36 1-3/16-18UNEF 1.641 41.68
23 1.262 32.05 1.147 29.13 40 1-5/16-18UNEF 1.766 44.86
25 1.387 35.23 1.272 32.31 44 1-7/16-18UNEF 1.891 48.03
12www.conesys.com sales@aero-electric.com
38999 S I
– –
Dummy Stowage Receptacle, Bayonet Coupling
SHELL
SIZE
Ø A
+.001
-.005
K
+.015
-.000
M
±.010
Ø T
+.010
-.005
S
±.020
J
+.010
-.015
9.572 .085 .727 .128 .938 .567
11 .700 .085 .727 .128 1.031 .567
13 .850 .085 .727 .128 1.125 .567
15 .975 .085 .727 .128 1.219 .567
17 1.100 .085 .727 .128 1.312 .567
19 1.207 .085 .727 .128 1.438 .567
21 1.332 .115 .697 .128 1.562 .567
23 1.457 .115 .697 .147 1.688 .567
25 1.582 .115 .697 .147 1.812 .567
MIL. Prex M38999 9/ XX B
Aero Prex AE10 9- XX B
Shell Type
9 = receptacle, dummy stowage, bayonet coupling
Shell Size
9 THRU 25 (Note: single digit for shell size 9)
Material Finish
B = Aluminum, Cadmium Olive Drab
A = Aluminum, Bright Cadmium over Nickel base (Aero p/n only)
F = Aluminum shell, Electroless Nickel nish (Aero p/n only)
S = Stainless steel shell, passivated (Aero p/n only)
BN = Aluminum, Black Nickel (Aero p/n only)
BZ = Bronze (Aero p/n only)
Part Number Conguration
M38999/9
Dummy Stowage Receptacle
AE109
13www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999
Polarization
Series I
Keying Positions
Notes:
1.Mating face of receptacle shown (plug is opposite).
2.e master keyway (key) has various positions relative
to DATUM F; the minor keyways (keys) remain xed as
shown. In the Normal position, the master keyway (key)
is at 95° from DATUM F.
3.e angles for a given connector are the same whether it
contains pin or socket inserts.
4.e insert arrangement does not rotate relative to master
keyway (key).
DATUM F
MASTER
KEYWAY
NORMAL
5°
Shell
Size
Keying Positions
BSC
9 95 77 113
11 95 81 67 123 109
13 95 75 63 127 115
15 95 74 61 129 116
17 95 77 65 125 113
19 95 77 65 125 113
21 95 77 65 125 113
23 95 80 69 121 110
25 95 80 69 121 110
14www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999 Series I
Flange and Jam Nut Receptacles
Panel Cutouts
Panel Cutouts
Flange and Jam Nut Mounting Dimensions
Shell
Size
AØ B Ø C D E Ø F
+.000* +.00* +.010 +.25
(TP) Minimum ±.005 ±.13 Maximum -.010 -.25 -.000 -.00
inch mm inch mm inch mm inch mm inch mm inch mm
9 .719 18.26 .656 16.66 .128 3.25 .234 5.94 .657* 16.70* .693 17.60
11 .812 20.62 .796 20.22 .128 3.25 .234 5.94 .771 19.59 .825 20.96
13 .906 23.01 .922 23.42 .128 3.25 .234 5.94 .955 24.26 1.010 25.65
15 .969 24.61 1.047 26.59 .128 3.25 .234 5.94 1.085 27.56 1.135 28.83
17 1.062 26.97 1.219 30.96 .128 3.25 .234 5.94 1.210 30.73 1.260 32.01
19 1.156 29.36 1.297 32.94 .128 3.25 .234 5.94 1.335 33.91 1.385 35.18
21 1.250 31.75 1.422 36.12 .128 3.25 .204 5.18 1.460 37.08 1.510 38.35
23 1.375 34.93 1.547 39.29 .154 3.91 .204 5.18 1.585 40.26 1.635 41.53
25 1.500 38.10 1.672 42.47 .154 3.91 .193 4.90 1.710 43.43 1.760 44.70
Note 1: Flange Mounting Dimensions (Ø B cutout and
D MAX) listed only for back of panel mounting (MS27505
and MS27656).
Note 2: D MAX includes mounting hardware.
* Tolerance ± .10mm (±.004”)
A
=
F
4x C
FLANGE MOUNT
B
MIN
D MAX
PANEL THICKNESS
.125(3.18)
.062(1.57)
PANEL THICKNESS
JAM NUT MOUNT
b
15www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999
Contacts, Tools and Seal Plugs
Series I
Contacts, Plastic Insertion/Removal Tools and Seal Plugs
Crimping and Metal Insertion/Extraction Tools
Contact and Wire Data
Contact Size
Application Pin Contacts Socket Contacts Seal Plugs Insertion/Removal Tools
Plastic
Type Military No. Military No. Military No. Military No.
22D Power/Signal M39029/58-360 M39029/56-348
MS27488-22-1 M81969/14-01
22M* Power/Signal M39029/58-361 M39029/56-349
22* Power/Signal M39029/58-362 M39029/56-350
20 Power/Signal M39029/58-363 M39029/56-351 MS27488-20-1 M81969/14-10
16 Power/Signal M39029/58-364 M39029/56-352 MS27488-16-1 M81969/14-03
12 Power/Signal M39029/58-365 M39029/56-353
MS27488-12-1 M81969/14-0412 Coax Coax M39029/28-211 M39029/75-416
12 Coax Coax M39029/102-558 M39029/103-559
8 Coax Coax M39029/60-367 M39029/59-366 MS27488-8-1 M81969/14-06
8 Twinax Twinax M39029/90-529 M39029/91-530 MS27488-8-1 M81969/14-12
Contact Size/
Type
Crimp Tool Positioner Positioner Insertion Tool Extraction Tool
For Pin Contacts For Socket Contacts Metal Metal
Military No. Military No. Military No. Military No. Military No.
22D, 22M* M22520/2-01 M22520/2-09 M22520/2-07 M81969/8-01 M81969/8-02
22* M22520/2-01 M22520/2-09 M22520/2-07 M81969/8-03 M81969/8-04
20 M22520/1-01 M22520/1-04 M22520/1-04 M81969/8-05 M81969/8-06
M22520/2-01 M22520/2-10 M22520/2-10
16 M22520/1-01 M22520/1-04 M22520/1-04 M81969/8-07 M81969/8-08
12 M22520/1-01 M22520/1-04 M22520/1-04
M81969/8-09 M81969/8-1012 Coax Inner M22520/2-01 M22520/2-34 M22520/2-34
12 Coax Outer M22520/31-01 M22520/31-02 M22520/31-02
8 Coax Inner M22520/2-01 M22520/2-31 M22520/2-31
M81969/8-13** M81969/8-14
8 Coax Outer M22520/5-01 M22520/5-05 M22520/5-05
Die Closure B Die Closure B
8 Twinax Center M22520/2-01 M22520/2-37 M22520/2-37
8 Twinax Outer
& Intermediate M22520/5-01 M22520/5-200 M22520/5-200
Contact Size
Test Current Voltage Crimp Well Data Wire Range Finished Wire Ø Range
DC Test Max. Drop Well Dia. Minimum Well Dept Minimum Maximum
Amps Millivolts inch inch mm AWG mm2inch mm inch mm
22D 5.0 73 .0345 ±.0010 .141 3.58 28-22 .08-.33 .030 .76 .054 1.37
22M* 3.0 45 .028 ±.001 .141 3.58 28-24 .08-.20 .030 .76 .050 1.27
22* 5.0 73 .0365 ±.0010 .141 3.58 26-22 .13-.33 .034 .86 .060 1.52
20 7.5 55 .047 ±.001 .209 5.31 24-20 .20-.52 .040 1.02 .083 2.11
16 13.0 49 .067 ±.001 .209 5.31 20-16 .52-1.31 .065 1.65 .109 2.77
12 23.0 42 .100 ±.002 .209 5.31 14-12 2.08-3.31 .097 2.46 .142 3.61
*Inactive for new design
** Insertion tool is not required.
Note 1: Test Current and Maximum Voltage Drop when
tested with silver-plated wire at 25°C.
Note 2: Size 12 coax contacts purchased in bulk.
Note 3: Size 8 coax contacts are used with M17/095-RG180
cable, while size 8 Twinax contacts are used with
M17/176-00002 cable.
16www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999
Contact Installation Instructions
Series I
Contact Installation
Instructions
Crimping Contacts
1. Select the appropriate crimp tool and ensure that the
proper crimp head positioner is used.
2. Cycle the tool to be sure the indentors are open.
3. Determine the correct selector setting for the wire size
from the data plate on the positioner (turret head
assembly) and set the selector knob on the crimp tool
to match.
4. Place the contact, mating end rst, into the tool.
5. Insert the stripped wire into the hollow end of the
contact. Be sure the wire is inserted as far as it will go.
6. Close the tool completely to crimp. Unless the tool is
closed completely, the tool will not release the contact.
7. Remove the crimped contact from the tool. Check the
inspection hole to verify that the wire is fully inserted.
Insertion of Contacts
1. Before inserting the contacts, unscrew the accessories
(clamps, backshells or adapters) from rear of plug or
recep tacle. Slide the hardware over the wire bundle in
the proper order for reassembly aer all the contacts
are inserted.
2. To assist insertion of contacts, lubricate insulator
(grommet) cavities with isopropyl alcohol. Alcohol will
evaporate and will not leave a conductive lm. Caution:
Never use any lubricant other than isopropyl alcohol.
3. Place the correct insertion tool on the contact so that the
wire runs along the groove in the tool. (Tool tip will butt
against the shoulder.) Hold the plug or receptacle body
rmly.
4. Beginning with a center cavity, insert the contact into
the insulator with a slow, even pressure until the contact
snaps into position. Make sure the contact and tool are
held perpendicular to the face of the insert during the
contact installation or the grommet could be damaged.
4.1 If contacts are not inserted all the way prior to
removing insertion tool, do not try to reinsert the
insertion tool. Instead, remove the contact and try
again; otherwise reinserting the insertion tool may
damage the inside of the contact cavity.
5. Remove tool and check the face of the connector for
proper contact installation. Proper installation may also
be checked by pulling back lightly on the wire to make
sure the contact is properly seated.
Completion
Aer all the cavities have been lled, slide the hardware back
into position on the connector and tighten.
Extraction of Contacts (Rework)
1. Slide the hardware back over the wire bundle.
2. Select the appropriate tool. Place the wire into the
extraction tool of the pin or socket.
3. Slowly slide the extraction tool down wire into the
contact cavities until the tool tip bottoms against the
contact shoulder, expanding the clip retaining tines. Hold
the wire rmly in the tool and pull the wired contact and
tool straight out of the rear of the insulator.
Size Pin Contact Socket Contact Basic Crimp Tool Pin Positioner Socket Positioner Insertion/Removal
Tool
22D M39029/58-360 M39029/56-348 M22520/2-01 M22520/2-09 M22520/2-07 M81969/14-01
22M M39029/58-361 M39029/56-349 M22520/2-01 M22520/2-09 M22520/2-07 M81969/14-01
22 M39029/58-362 M39029/56-350 M22520/2-01 M22520/2-09 M22520/2-07 M81969/14-01
20 M39029/58-363 M39029/56-351 M22520/1-01 M22520/1-04 Red M22520/1-04 Red M81969/14-10
M22520/2-01 M22520/2-10 M22520/2-10
20 M39029/58-364 M39029/56-352 M22520/1-01 M22520/1-04 Blue M22520/1-04 Blue M81969/14-03
12 M39029/58-365 M39029/56-353 M22520/1-01 M22520/1-04 Yellow M22520/1-04 Yellow M81969/14-04
For coax and twinax contacts refer to instructions that are supplied with contacts.
17www.conesys.com sales@aero-electric.com
38999 S I
– –
See next page for Shell Sizes 21 thru 25 layouts.
MIL-DTL-38999 Series I
Insert Availability and Contact Information
per MIL-STD-1560
Insert Availability and Contact Information
Insert
Arrangement
Aero-Electric Service Total Quantity of Contacts
Status No. of (by Size)
Series I QPL’d Tooled Rating Contacts 22D 22M 22 20 16 12 10 8
9-6* Yes Yes M 6 6
9-35 Yes Yes M 6 6
9-98 Yes Yes I 3 3
11-2 Yes Yes I 2 2
11-4 Yes Yes I 4 4
11-5 Yes Yes I 5 5
11-13* Yes Yes M 13 13
11-35 Yes Yes M 13 13
11-98 Yes Yes I 6 6
11-99 Yes Yes I 7 7
13-4 Yes Yes I 4 4
13-8 Yes Yes I 8 8
13-22* Yes Yes M 22 22
13-35 Yes Yes M 22 22
13-98 Yes Yes I 10 10
15-5 Yes Yes II 5 5
15-15 Yes Yes I 15 14 1
15-18 Yes Yes I 18 18
15-19 Yes Yes I 19 19
15-35 Yes Yes M 37 37
15-37* Yes Yes M 37 37
15-97 Yes Yes I 12 8 4
17-6 Yes Yes I 6 6
17-8 Yes Yes II 8 8
17-26 Yes Yes I 26 26
17-35 Yes Yes M 55 55
17-55* Yes Yes M 55 55
17-99 Yes Yes I 23 21 2
19-11 Yes Yes II 11 11
19-28 Yes Yes I 28 26 2
19-30 Yes Yes I 30 29 1
19-32 Yes Yes I 32 32
19-35 Yes Yes M 66 66
19-66* Yes Yes M 66 66
*Not approved for new design. Tooled and qualied but their
separate pictorials are not shown on pages 19 thru 21, as they
are the same as corresponding (-35) layouts that take the same
quantity of 22D contacts, but are supplied with 22M contacts
instead.
18www.conesys.com sales@aero-electric.com
38999 S I
– –
MIL-DTL-38999 Series I
Insert Availability and Contact Information
per MIL-STD-1560
Insert Availability and Contact Information (continued)
Insert
Arrangement
Aero-Electric Service Total Quantity of Contacts
Status No. of (by Size)
Series I QPL’d Tooled Rating Contacts 22D 22M 22 20 16 12 10 8
21-1* Yes Yes M 79 79
21-11 Yes Yes I 11 11
21-16 Yes Yes II 16 16
21-35 Yes Yes M 79 79
21-39 Yes Yes I 39 37 2
21-41 Yes Yes I 41 41
21-48** N/A Yes I 4 4 (Power)
21-75 Yes Yes Twinax 4 4 (Twinax)
23-1* Yes Yes M 100 100
23-2*** Yes Yes M 85 85
23-21 Yes Yes II 21 21
23-32 Yes Yes I 32 32
23-35 Yes Yes M 100 100
23-53 Yes Yes I 53 53
23-55 Yes Yes I 55 55
25-1* Yes Yes M 128 128
25-4 Yes Yes I 56 48 8
25-19 Yes Yes I 19 19
25-24 Yes Yes I 24 12 12
25-29 Yes Yes I 29 29
25-35 Yes Yes M 128 128
25-43 Yes Yes I 43 23 20
25-46 Yes Yes I, Coax 46 40 4 2 (Coax)
25-61 Yes Yes I 61 61
*Not approved for new design. Tooled and qualied but their separate
pictorials are not shown on pages 19 thru 21, as they are same as
corresponding (-35) layouts that take the same quantity of 22D contacts,
but are supplied with 22M contacts instead.
** 21-48 layout is not to MIL-STD-1560. It is tooled and intended for
commercial use only.
*** Not approved for new design. Pictorial is shown on page 20.