I IA CE SIPLUS RIC IEC on S7 Interoperability list IEC 60870-5-103 Master V1.5 Interoperability list IEC 60870-5-103 I IA CE Contents 1. Physical Layer...................................................................................................................................3 2. Application Layer..............................................................................................................................4 3. Protection devices ............................................................................................................................5 Copyrigh 2013 All rights reserved The forwarding and reproduction of this document, and the reuse and distribution of its content is not permitted, unless explicit permission has been granted. Damages will be sought in all cases of infringement. All rights reserved, in particular in the event of patents being granted or a utility model being registered. Siemens AG I IA CE P.O. Box 23 55 90713 Furth Germany SIPLUS RIC IEC on S7 V1.5 Disclaimer We have checked the content of this printed document in accordance with the hardware and software described. Nevertheless, the risk of deviations cannot be excluded completely, which is why we do not accept liability for complete conformity. The details provided in this printed document are checked on a regular basis, however, and any corrections necessary are included in subsequent editions. We would be happy to receive your suggestions for improvement. Technical data subject to change. Page 2 of 5 (c)SIEMENS AG 2013 Interoperability list IEC 60870-5-103 I IA CE IEC60870-5-103 This documentation is used to match the functionality required/demanded for communication with SIMATIC S7-300, SIMATIC S7-400 or SIMATIC ET200S devices based on telecommunication standard IEC 60870-5-103. General information Legend: Not implemented X Implemented 1. Physical Layer (network specific parameter; all implemented configurations are marked with X') X Electrical Interface RS-485 Optical Interface* *) The optical interface can be realized by external media converter. Transmission speed Same transmission speed for control direction and monitoring direction. Asymmetrical interface RS485/RS422 X 9600 bits/s X 19200 bits/s The available transmission rates depend on the used CP and interface module. SIPLUS RIC IEC on S7 V1.5 Page 3 of 5 (c)SIEMENS AG 2013 Interoperability list IEC 60870-5-103 I IA CE 2. Application Layer ASDUs in monitoring direction Type-ID X <1> := Time tagged message X <2> := Time-tagged message with relative time X <3> := Measurands I X <4> := Time-tagged measurands with relative time X <5> := Identification message X <6> := Time synchronization X <8> := Termination of general interrogation X <9> := Measurands II <10> := Generic Data <11> := Generic identification <23> := List of recorded disturbances <26> := Ready for transmission of disturbance data <27> := Ready for transmission of a channel <28> := Ready for transmission of tags <29> := Transmission of tags <30> := Transmission of disturbance values <31> := End of Transmission ASDUs in control direction Type-ID X <6> := Time synchronization X <7> := Initiation of general interrogation <10> := Generic data X <20> := General Command <21> := Generic Command <24> := Order for disturbance data transmission <25> := Acknowledgement for disturbance data transmission Basic application functions Test mode Blocking of monitoring direction Disturbance data Generic services X Private data (only Type-ID 140, Measurands SIMEAS T) SIPLUS RIC IEC on S7 V1.5 Page 4 of 5 (c)SIEMENS AG 2013 Interoperability list IEC 60870-5-103 I IA CE 3. Protection devices X - Distance Protection (function type 128) X - Over current protection (function type 160) X - Transformer differential protection (function type 176) X - Linie differential protection (function type 192) Private defined information with respect to chapter 2 can be supported. Every information is parameterized individually. A catalogue with pre defined information is not planned. SIPLUS RIC IEC on S7 V1.5 Page 5 of 5 (c)SIEMENS AG 2013