MSM 30 Metal Line Switches https://www.schurter.com /PG70 Metal Switch Medium Stroke, Switching Voltage up to 250 VAC Single-color RGB RGB See below: Approvals and Compliances Description - Momentary action switch available in version: Standard (ST), with Lettering (LE), with Point Illumination (PI) and with Ring Illumination (RI) - Single color or RGB illumination - Choice from 7 colors for RGB variants - Assembly method: clip micro-switch into the saddle, secure switch using mounting nut - Equipped with flat-pin plugs to permit fast connection Unique Selling Proposition - Attractive tactile feedback High quality materials Long life span Single color or homogeneous RGB illumination Characteristics - Housing and actuator material: high-quality stainless steel - Variety of design options regarding size, colour, illumination, connection or lettering - Switching voltage from 30 VDC to 250 VAC, switching current from 0.1 A to 10 A - IP-Protection: IP67 from front side to contact area, Micro-Switch is available in versions IP40 or IP67 - For use in harsh environments (see technical data) References Alternative: double-pole switch: MSM DP 19;MSM DP 22;MSM DP 30 Alternative: Other diameter MSM DP 19;MSM DP 22;MSM DP 30;MSM 16 Weblinks html data sheet, General Product Information, CAD-Drawings, Product News, Detailed request for product Switches 1 MSM 30 Metal Line Switches https://www.schurter.com /PG70 Technical Data Electrical Data Switching Function Number of Poles Supply Voltage N.O., N.C., N.O./N.C. SPST 24 VDC Ring Illumination , Point Illumination without series resistor , LED operating data are listed in separate table 5 VDC and 12 VDC variants (except for RGB) on request (MOQ 500 pieces) 4 kV MSM ST / MSM LE Impulse Withstand Voltage (ESD) Micro Switch 5 A / 125 VAC or 3 A / 250 VAC, IP40 Contact Material Ag Switching Voltage max. 125 / 250 VAC Switching Current max. 5 / 3 A Rated Switching Capacity 750 W Lifetime 0.2 million actuations at Rated Switching Capacity Contact Resistance < 30 m Insulation Resistance > 100 M Duration of Bounce < 5 ms Micro Switch 0,1 A / 30 VDC, IP40 Contact Material Au Switching Voltage max. 30 VDC Switching Current max. 0.1 A Rated Switching Capacity 3W Lifetime 0.2 million actuations at Rated Switching Capacity Contact Resistance < 50 m Insulation Resistance > 100 M Duration of Bounce < 5 ms Micro Switch for Electrical Rating 10 A / 250 VAC (Protection Class IP40) Contact Material Ag Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.05 million actuations at Rated Switching Capacity Contact Resistance < 30 m Insulation Resistance > 100 M Duration of Bounce < 5 ms Micro Switch 6 A / 250 VAC, IP67 Switching Voltage max. 250 VAC Switching Current max. 5 Rated Switching Capacity 1250 W Lifetime 0.05 million actuations at Rated Switching Capacity Micro Switch 0,1 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 0.1 Rated Switching Capacity 25 W Lifetime 0.05 million actuations at Rated Switching Capacity Micro Switch 10 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.01 million actuations at Rated Switching Capacity Mechanical Data Actuating Force Actuating Travel Lifetime Shock Protection Mounting screw torque Plastic Nut Mounting screw torque Stainless Steel Nut Climatical Data Operating Temperature Storage Temperature Protection Class Switching Unit Salt Spray Test (acc. to DIN 50021-SS) Material Housings Actuator Light Conductor (Point Illumination) Illuminated Ring (Ring Illumination) Seal Ring Switcher Collet 4.5 N 1.2 mm 1.5 million actuations IK 07 max. 8 Nm max. 50 Nm -25 to 85 C -25 to 85 C IP67 IP40 IP67 optional 24 h / 48 h / 96 h Residence Time Stainless Steel Stainless Steel PC PA for dotted single color variants PMMA for RGB and homogeneous single color variants NBR70 PA Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. 2 Switches MSM 30 Metal Line Switches https://www.schurter.com /PG70 Approvals Approval Reference Type: MSM 30 Approval Logo Certification Body Description Low Voltage Directive 2014/35/EU compliant following certificate numbers apply to micro switch VDE / ENEC Certificate Number (Omron): 40008425, 129246, 125256 UL UL / CSA File Number (Omron): E41515 VDE / ENEC Certificate Number (Marquardt): 097550 UL UL / CSA File Number (Marquardt): E41791 KEMA KEMA / ENEC File Number (Cherry): 2089323.01 UL UL / CSA File Number (Cherry): E23301 CQC CQC File Number (Marquardt): CQC13005090991 Product standards Product standards that are referenced Organization Design Standard Description Designed according to DIN EN 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 1054 UL standard for safety special-use switches Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Details Initiator Description RoHS SCHURTER AG EU Directive RoHS 2011/65/EU REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] MSM 30 ST MSM 30 LE C B 0,50 20 NC NO COM 25 max. 5mm 10,20 33,10 2,80 28,80-0,05 0,50 20 NC NO COM 34 M30x1,5 36 max. 5mm 10,20 33,10 36 2,05 34 M30x1,5 2,05 C 2,80 B 25 Switches 3 MSM 30 Metal Line Switches https://www.schurter.com /PG70 MSM 30 RI Single color MSM 30 PI C 28,80-0,05 2,05 max. 5mm 10.20 33.10 2,80 0.50 20 2.80 ca. 41.6 A SW 36 0,50 20 34 M30x1,5 36 max. 5mm 10,20 33,10 36 2,05 C 34 M30x1,5 NC NO COM NC NO COM B B 2 25 A o 18.8 o 25 Verdrehsicherung anti-rotation protection 34 M30x1 2.05 MSM 30 RI RGB 33.1 Mutter nut 10.5 max. 5 O-Ring 0.5 2.8 20 2.8 0.5 36 NC NO COM Legend A = Illumination Area B = Actuating Area C = Width Across Flats D = Nut 0.20 0.20 Tolerance Range Actuator Tolerance Range The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. 4 Switches 25 Betatigungsflache actuator area Leuchtring illuminated Ring MSM 30 Metal Line Switches https://www.schurter.com /PG70 Dimension MSM 30 LE / MSM 30 PI / MSM 30 RI optional MSM 30 ST / MSM 30 RI Drilling diagram Drilling diagram Assembly Instructions During assembly, the protruding bars of the holder should not be pressed together. I Housing II Flat Pin Terminal (Illumination) III Gasket IV Nut (Nut type see Dimensions) V Module Switching Contact Installation Instruction: 1.) Place the gasket accurately on the actuator housing. Then mount the actuator housing assembly into the panel. 2.) Tighten the screw nut according to the torque instructions. 3.) Clasp the module switching contact into the micro switch holder of the actuator housing. Installation information: 1.) The power supply and the configuration of the flat pin terminals have to be installed correctly for the illumination and micro switch function. 2.) Insulate the terminals as required. Fully insulated plug-in sleeves are recommended. 3.) Installation instructions according to VDE-standard DIN VDE 0100-100 or alternatively IEC 60354 standard. Switches 5 MSM 30 Metal Line Switches https://www.schurter.com /PG70 Diagrams MSM ST / MSM LE MSM PI COM NO NC COM MSM RI / 24 V Single color MSM RI / 24 V RGB D3 D4 D2 D5 D1 D6 Rv Singlecolor terminal R LED +pole red LED terminal G LED +pole green LED Active terminal R) Active terminal G) Active terminal B) x Singlecolor RGB Additive 2 x terminalLED -pole ground (GND) B COM NO NC Resulting Color Green x x G Red x RGB Additive 2 R terminal B LED +pole blue LED NO NC Singlecolor x RGB Additive 2 RGB Additive 3 terminal assignment with resistors for 24 VDC Rv COM Lighting type NO NC x Blue Yellow x Magenta x x Cyan x x White Illumination options for RGB Point Illumination Operating Data Forward Current max. Forward Voltage at 10 mA LED red 30 mA 1.9 VDC Forward Voltage at 8 mA Forward Voltage at 20 mA Forward Voltage max. 3.0 VDC LED green 30 mA 2.1 VDC 3.0 VDC LED yellow 30 mA 2.1 VDC 3.0 VDC LED blue 20 mA LED white 30 mA 3.6 VDC LED red / green 25 mA 2.0 VDC / 2.2 VDC 3.7 VDC Attention: Switches are delivered without series resistor. Lettering The last three digits in the order number define the lettering: 000 No Lettering 001-074 Standard Lettering 101- Customized Lettering 6 Switches 4.5 VDC 4.0 VDC MSM 30 Metal Line Switches https://www.schurter.com /PG70 Lettering Colour of Laser Lettering Material Lettering Colour Stainless Steel black Filled letters 021 = U 041 = / Order Index Lettering Laser Marking 001 = A 061 = EIN 002 = B 022 = V 042 = 062 = AUS 003 = C 023 = W 043 = = 063 = AUF 004 = D 024 = X 044 = # 064 = AB 005 = E 025 = Y 045 = 065 = ON 006 = F 026 = Z 046 = 066 = OFF 007 = G 027 = 0 047 = 067 = UP 008 = H 028 = 1 048 = 068 = DOWN 009 = I 029 = 2 049 = 069 = HIGH 010 = J 030 = 3 050 = 070 = LOW 011 = K 031 = 4 051 = % 071 = ON/OFF 012 = L 032 = 5 052 = 072 = START 013 = M 033 = 6 053 = CTRL 073 = RESET 014 = N 034 = 7 054 = RETURN 074 = 015 = O 035 = 8 055 = SHIFT 075 = 016 = P 036 = 9 056 = LOCK 076 = 017 = Q 037 = + 057 = STOP 077 = 018 = R 038 = - 058 = ENTER 019 = S 039 = . 059 = BACK 020 = T 040 = x 060 = LINE All Variants IP Switching Unit Switching Current Switching Voltage Illumination, LED Housing Material, Torsion Protection Actuator Material, Torsion Protection Config. Code Order Number [A] [VAC/ VDC] IP40 100mA 30VDC non-illuminated Stainless Steel ,no Stainless Steel ,no MSM 30ST 1241.6661.1110000 IP40 5 / 3A 125 / 250VAC non-illuminated Stainless Steel ,no Stainless Steel ,no MSM 30ST 1241.6661.1120000 IP40 10A 250VAC non-illuminated Stainless Steel ,no Stainless Steel ,no MSM 30ST 1241.6661.1130000 Stainless Steel ,no IP67 6A 250VAC non-illuminated Stainless Steel ,no MSM 30ST 1241.6661.1170000 IP40 100mA 30VDC Point Illumination, red Stainless Steel ,yes Stainless Steel ,yes MSM 30PIred 1241.6663.1111000 IP40 100mA 30VDC Point Illumination, blue Stainless Steel ,yes Stainless Steel ,yes MSM 30PIblue 1241.6663.1114000 IP40 5 / 3A 125 / 250VAC Point Illumination, red Stainless Steel ,yes Stainless Steel ,yes MSM 30PIred 1241.6663.1121000 IP40 5 / 3A 125 / 250VAC Point Illumination, green Stainless Steel ,yes Stainless Steel ,yes MSM 30PIgreen 1241.6663.1122000 IP40 5 / 3A 125 / 250VAC Point Illumination, blue Stainless Steel ,yes Stainless Steel ,yes MSM 30PIblue 1241.6663.1124000 IP40 5 / 3A 125 / 250VAC Point Illumination, white Stainless Steel ,yes Stainless Steel ,yes MSM 30PIwhite 1241.6663.1125000 IP40 10A 250VAC Point Illumination, green Stainless Steel ,yes Stainless Steel ,yes MSM 30PIgreen 1241.6663.1132000 IP40 5 / 3A 125 / 250VAC Point Illumination, red Alu red ,yes MSM 30PIred 1241.6663.3121 IP40 100mA 30VDC Ring dotted, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes Alu red ,yes MSM 30RIred 1241.6664.1111000 IP40 100mA 30VDC Ring dotted, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIgreen 1241.6664.1112000 IP40 100mA 30VDC Ring dotted, yellow, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIyellow 1241.6664.1113000 IP40 100mA 30VDC Ring dotted, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIblue 1241.6664.1114000 IP40 5 / 3A 125 / 250VAC Ring dotted, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIred 1241.6664.1121000 IP40 5 / 3A 125 / 250VAC Ring dotted, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIgreen 1241.6664.1122000 IP40 5 / 3A 125 / 250VAC Ring dotted, yellow, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIyellow 1241.6664.1123000 IP40 5 / 3A 125 / 250VAC Ring dotted, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIblue 1241.6664.1124000 Switches 7 MSM 30 IP Switching Unit Switching Current Metal Line Switches https://www.schurter.com /PG70 Switching Voltage Illumination, LED Housing Material, Torsion Protection Actuator Material, Torsion Protection Config. Code Order Number [A] [VAC/ VDC] IP40 5 / 3A 125 / 250VAC Ring dotted, white, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIwhite 1241.6664.1125000 IP40 10A 250VAC Ring dotted, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIgreen 1241.6664.1132000 IP40 10A 250VAC Ring dotted, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIblue 1241.6664.1134000 IP40 100mA 30VDC Ring homogeneous, RGB, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIRGB 3-102-785 IP40 10A 250VAC Ring homogeneous, RGB, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIRGB 3-102-787 IP40 100mA 30VDC Ring homogeneous, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIred 3-108-964 IP40 5 / 3A 125 / 250VAC Ring homogeneous, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIred 3-108-965 IP40 10A 250VAC Ring homogeneous, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIred 3-108-966 IP40 100mA 30VDC Ring homogeneous, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIgreen 3-108-967 IP40 5 / 3A 125 / 250VAC Ring homogeneous, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIgreen 3-108-968 IP40 10A 250VAC Ring homogeneous, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIgreen 3-108-969 IP40 100mA 30VDC Ring homogeneous, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIblue 3-108-977 IP40 5 / 3A 125 / 250VAC Ring homogeneous, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIblue 3-108-978 IP40 10A 250VAC Ring homogeneous, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 30RIblue 3-108-979 IP-Protection: IP67 from front side to contact area, Micro-Switch is available in versions IP40 or IP67, see Technical Data Micro-Switch Variants with 6 A micro switch have IP67 The MOQ for standard laser lettering on standard variants is 10 pieces. 5 VDC and 12 VDC variants (except for RGB) on request (MOQ 500 pieces) Customer-specific versions available on request. Special materials for use in salt and chlorinated environment on request. The nut with gasket and micro switch are enclosed in the box. Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 8 10in box with insert or packed in air cushion bags Switches MSM 30 Metal Line Switches https://www.schurter.com /PG70 Accessories Description 07.02.2019 Power Supply Power Supply IP42 for LED- and Illumination applications indoor 90~264 VAC => 24 VDC 0.34 A 8 W The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Switches 9