Ordering number:EN5994 SVC220 Diffused Junction Type Silicon Diode Varactor Diode for FM Receiver Electronic Tuning Use Features Package Dimensions * Twin type varactor diode with good large-signal characteristics for FM receiver electronic tuning use. * Very small package permits SVC220-applied sets to be compact and slim. * Can be also proviede in tape reel package automatic insertion is supported. * High Q. Electrical Connection unit:mm 1169A [SVC220] Cathode Anode 1:Anode 2:Anode 3:Cathode Anode Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Reverse Votlage VR 16 V JuntionTemperature Tj 125 C Storage Temperature Tstg -55 to +125 C Electrical Characteristics at Ta = 25C Parameter Breakdown Voltage Symbol V(BR)R IR Reverse Current Interterminal Capacitance Quality Factor *1 Matching Tolerance * 2 IR=10A Ratings min typ max Unit 16 V VR=10V 50 nA C2V VR=2.0V, f=1MHz 44.0 46.5 pF C8V VR8.0V, f=1MHz 25.1 28.2 pF VR=3.0V, f=100MHz 100 C2.0V/C8.0V VR=2.0V, f=1MHz (Cmax-Cmin)/Cmin 1.65 Q Capacitance Ratio Conditions CR Cm 1.75 0.03 Capacitance value per each diode. *12 :: Capacitance deviation of seven smaples packaged consecutively in a tape. * Marking : OV Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 90498GI (KOTO) No.5994-1/3 SVC220 C, Q - VR 5 5 3 3 Quality Factor,Q(f=100MHz) Interterminal Capacitance, C - pF 100 100 7 7 5 5 3 3 Interterminal Capacitance, C(f=1MHz) 1unit (Capacitance of a single diode) 2 10 0 1 2 3 4 5 6 7 8 9 Quality Factor, Q 2 2 2 10 10 Reverse Votlage, VR - V C - Ta 1.05 Vrf=20mVrms f=1MHz 1.04 VR=2V 1.03 3V 4V 1.02 Capacitance Ratio 6V 8V 1.01 1.00 0.99 VR=8V 6V 4V 3V 0.98 2V 0.97 0.96 -50 -25 0 25 50 Ambient Temperature, Ta - 75 100 125 150 C PS No.5994-2/3 SVC220 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any and all SANYO products described or contained herein fall under strategic products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, such products must not be exported without obtaining export license from the Ministry of International Trade and Industry in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 1998. Specifications and information herein are subject to change without notice. PS No.5994-3/3