SVC220-PM-TB-E - ON SEMICONDUCTOR

90498GI (KOTO) No.5994-1/3

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters

TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Ordering number:EN5994

SVC220

Diffused Junction Type Silicon Diode

Varactor Diode for

FM Receiver Electronic Tuning Use

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Electrical Characteristics at Ta = 25˚C

Package Dimensions

unit:mm

1169A [SVC220]

Features

· Twin type varactor diode with good large-signal

characteristics for FM receiver electronic tuning use.

· Very small package permits SVC220-applied sets to

be compact and slim.

· Can be also proviede in tape reel package automatic

insertion is supported.

· High Q.

Electrical Connection

1:Anode

2:Anode

3:Cathode

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnwodkaerBV

R)RB( IRAµ01=61V

tnerruCesreveRI

RVRV01= 05An

ecnaticapaClanimretretnI

1CV2 VRzHM1=f,V0.2=0.445.64Fp

CV8 VRzHM1=f,V0.81.522.82Fp

rotcaFytilauQQV

RzHM001=f,V0.3=001

oitaRecnaticapaCC

RCV0.2 C/ V0.8 56.157.1

ecnareloTgnihctaM

2∆CmVRC(zHM1=f,V0.2= xam C– nim C/) nim 30.0

retemaraPlobmySsnoitidnoCsgnitaRtinU

egaltoVesreveRV

R61V

erutarepmeTnoitnuJjT 521

erutarepmeTegarotSgtsT 521+ot55–

˚C

*1 : Capacitance value per each diode.

*2 : Capacitance deviation of seven smaples packaged consecutively in a tape.

Marking : OV

Anode Anode

Cathode

PS No.5994-2/3

SVC220

–50

–25 0 25 50 75 100 125 150

0.96

0.97

0.98

0.99

1.00

1.01

1.02

1.03

1.04

1.05

Capacitance Ratio

C – Ta

Ambient Temperature, Ta – ˚C

Vrf=20mVrms

f=1MHz

VR=8V

VR=2V

100

123456789100

10 10

100

Interterminal Capacitance, C – pF

C, Q – VR

Quality Factor, Q

Reverse Votlage, VR – V

Quality Factor,Q(f=100MHz)

Interterminal Capacitance, C(f=1MHz) 1unit

(Capacitance of a single diode)

PS No.5994-3/3

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any and all SANYO products described or contained herein fall under strategic

products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of

Japan, such products must not be exported without obtaining export license from the Ministry of

International Trade and Industry in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of September, 1998. Specifications and information herein are

subject to change without notice.

SVC220