Cross Reference Guide BX5670 / SX5670* * Part number for additional environmental screening. Performance Data Package Drawing Frequency 20.0 - 250.0 MHz Gain 8.2 dB Typical 7.0 dB Min Noise Figure 2.0 dB Typical 3.0 dB Max P1dB 15.5 dBm Typical 13.5 dBm Min 3rd Order Intercept 28.0 dBm Typical 2nd Order Intercept 33.0 dBm Typical VSWR 1.4/2.0 Input Typ/Max 1.2/2.0 Output Typ/Max Reverse Isolation -11.0 dB Typical -10.0 dB Min Power Supply 5.0 Volts 25.0 mA Operating Temperature -55.0 - 85.0 C Gain dB Frequency (MHz) Noise Figure dB Frequency (MHz) P1dB Compression Point dBm Frequency (MHz) Reverse Isolation dB Frequency (MHz) Input VSWR Frequency (MHz) Output VSWR Frequency (MHz) S-Parameters Frequency S11 Mag S11 Ang S21 Mag S21 Ang S12 Mag S12 Ang S22 Mag S22 Ang 10.0 50.0 100.0 150.0 200.0 250.0 0.140 0.110 0.120 0.140 0.180 0.230 153.00 -180.00 -174.00 -169.00 -171.00 -173.00 2.500 2.540 2.540 2.540 2.560 2.580 7.00 -9.00 -21.00 -32.00 -44.00 -56.00 0.280 0.280 0.280 0.270 0.270 0.260 7.00 -9.00 -20.00 -31.00 -43.00 -55.00 0.130 0.090 0.090 0.100 0.110 0.140 150.00 165.00 165.00 167.00 168.00 166.00 Absolute Maximum Conditions Maximum Operating Temperature -55.0 - 100.0 C Maximum Storage Temperature -62.0 - 125.0 C Maximum Case Temperature 125.0 C Maximum Supply Voltage 10.0 Volts Continuous RF Input Power 13.0 dBm Short Term RF Input Power (1 minute max) 50.0 mW Maximum Peak Power (3 sec max) 0.5 W Amplifonix | 2707 Black Lake Place | Philadelphia, PA 19154 Tel: 215.464.4000 | FAX: 215.464.4001 | Email: info@amplifonix.com i2 Technologies US, Inc. 15445 Innovation Drive San Diego, CA 92128 i2 Technologies US, Inc. HTML Pages converted to PDF Document This document contain component information from the manufacturer's website which are not available in a revision controlled document from the manufacturer. To facilitate the addition of these parts into the Electronics Database, we are converting the HTML pages related to that part, from the manufacturer's website into Adobe PDF format. The contents of this document is based on the information provided on the manufacturer's website, therefore the information may have been changed by the manufacturer since this was created. Powering the Bottom Line (R)