HSL226 Silicon Schottky Barrier Diode for High Speed Switching REJ03G0016-0100Z Rev.1.00 Apr.15.2003 Features * Low reverse current, Low capacitance. * Extremely small Flat Package (EFP) is suitable for surface mount design. Ordering Information Type No. Laser Mark Package Code HSL226 V EFP Pin Arrangement 1 V Cathode mark Mark 2 1. Cathode 2. Anode Rev.1.00, Apr.15.2003, page 1 of 5 HSL226 Absolute Maximum Ratings (Ta = 25C) Item Symbol Value Unit Repetitive peak reverse voltage VRRM 25 V 1 Non-Repetitive Peak forward surge current IFSM * 200 mA Forward current IF 50 mA Junction temperature Tj 125 C Storage temperature Tstg -55 to +125 C Note: 1. 10 ms Sine Wave 1 pulse Electrical Characteristics (Ta = 25C) Item Symbol Min Typ Max Unit Test Condition Forward voltage VF1 0.33 V IF = 1 mA VF2 0.38 V IF = 5 mA Reverse current IR 0.45 A VR = 20 V Capacitance C 2.80 pF VR = 1 V, f = 1 MHz Notes: 1. Please do not use the soldering iron due to avoid high stress to the EFP package. 2. The material of lead is exposed for cutting plane. Therefor, soldering nature of lead tip part is considered as unquestioned. Please kindly consider soldering nature. Rev.1.00, Apr.15.2003, page 2 of 5 HSL226 Main Characteristic 10-4 101 100 Reverse current IR (A) Forward current IF (A) 10-1 10-2 10-3 10-4 Ta = 75C 10-5 Ta = 25C 10-6 10-5 Ta = 75C 10-6 Ta = 25C 10-7 10-7 10-8 0 0.2 0.4 0.6 0.8 1.0 0 10 20 30 40 Forward voltage VF (V) Reverse voltage VR (V) Fig.1 Forward current vs. Forward voltage Fig.2 Reverse current vs. Reverse voltage f=1MHz 10 Capacitance C (pF) 10-8 1.0 0.1 0.1 1.0 10 Reverse voltage VR (V) Fig.3 Capacitance vs. Reverse voltage Rev.1.00, Apr.15.2003, page 3 of 5 HSL226 Package Dimensions As of January, 2003 0.8 0.05 0.13 0.05 1.0 0.05 0.47 0.03 0.3 0.05 0.6 0.05 Unit: mm Package Code JEDEC JEITA Mass (reference value) Rev.1.00, Apr.15.2003, page 4 of 5 EFP -- -- 0.0007 g HSL226 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein. http://www.renesas.com Copyright (c) 2003. Renesas Technology Corporation, All rights reserved. Printed in Japan. Colophon 0.0 Rev.1.00, Apr.15.2003, page 5 of 5