TX-S TESTING New pin layout (LT type) added. Ultra high sensitivity realized at 50 mW nominal operating power Compliance with RoHS Directive FEATURES 1. Nominal operating power: High sensitivity of 50mW By using the highly efficient polar magnetic circuit "seesaw balance mechanism", a nominal operating power of 50 mW (minimum operating power of 32 mW) has been achieved. 2. Compact size 15.0(L) x 7.4(W) x 8.2(H) .591(L) x .291(W) x .323(H) 3. High contact reliability High contact reliability is achieved by the use of gold-clad twin crossbar contacts, low-gas formation materials, mold sealing the coil section, and by controlling organic gas in the coil. *We also offer a range of products with AgPd contacts suitable for use in low level load analog circuits (Max. 10V DC 10 mA). *SX relays designed for low level loads are also available. 4. Outstanding surge resistance. Surge breakdown voltage between open contacts: 1,500 V 10x160 sec. (FCC part 68) Surge breakdown voltage between contact and coil: 2,500 V 2x10 sec. (Telcordia) 5. Low thermal electromotive force (approx. 0.3 V) The structure of the mold-sealed body block of the coil section achieves nominal operating power of 50 mW and high sensitivity, along with low thermal electromotive force, reduced to approximately 0.3 V. TX-S RELAYS 6. A range of surface-mount types is also available. SA: Low-profile surface-mount terminal type SL: High connection reliability surfacemount terminal type SS: Space saving surface-mount terminal type 7. Sealed construction allows automatic washing. TYPICAL APPLICATIONS 1. Communications (XDSL, Transmission) 2. Measurement 3. Security 4. Home appliances, and audio/visual equipment 5. Automotive equipment 6. Medical equipment ORDERING INFORMATION TXS 2 Contact arrangement 2: 2 Form C Surface-mount availability Nil: Standard PC board terminal type or self-clinching terminal type SA: SA type SL: SL type SS: SS type Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching LT: 2 coil latching Terminal shape Nil: Standard PC board terminal or surface-mount terminal H: Self-clinching terminal Nominal coil voltage (DC) 1.5, 3, 4.5, 6, 9, 12, 24V Contact material Nil: Standard contact (Ag+Au clad) 1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable) Packing style Nil: Tube packing X: Tape and reel (picked from 1/3/4/5-pin side) Z: Tape and reel packing (picked from the 8/9/10/12-pin side) All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. TX-S TYPES 1. Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXS2-1.5V TXS2-3V TXS2-4.5V TXS2-6V TXS2-9V TXS2-12V TXS2-24V 1 coil latching Part No. TXS2-L-1.5V TXS2-L-3V TXS2-L-4.5V TXS2-L-6V TXS2-L-9V TXS2-L-12V TXS2-L-24V 2 coil latching (L2) Part No. TXS2-L2-1.5V TXS2-L2-3V TXS2-L2-4.5V TXS2-L2-6V TXS2-L2-9V TXS2-L2-12V TXS2-L2-24V 2 coil latching (LT) Part No. TXS2-LT-1.5V TXS2-LT-3V TXS2-LT-4.5V TXS2-LT-6V TXS2-LT-9V TXS2-LT-12V TXS2-LT-24V 2 coil latching (L2) Part No. TXS2-L2-H-1.5V TXS2-L2-H-3V TXS2-L2-H-4.5V TXS2-L2-H-6V TXS2-L2-H-9V TXS2-L2-H-12V TXS2-L2-H-24V 2 coil latching (LT) Part No. TXS2-LT-H-1.5V TXS2-LT-H-3V TXS2-LT-H-4.5V TXS2-LT-H-6V TXS2-LT-H-9V TXS2-LT-H-12V TXS2-LT-H-24V 2 coil latching (L2) Part No. TXS2S-L2-1.5V TXS2S-L2-3V TXS2S-L2-4.5V TXS2S-L2-6V TXS2S-L2-9V TXS2S-L2-12V TXS2S-L2-24V 2 coil latching (LT) Part No. TXS2S-LT-1.5V TXS2S-LT-3V TXS2S-LT-4.5V TXS2S-LT-6V TXS2S-LT-9V TXS2S-LT-12V TXS2S-LT-24V Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add "-1" to the end of the part number for AgPd contacts (low level load). 2. Self-clinching terminal Contact arrangement Nominal coil voltage 2 Form C 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXS2-H-1.5V TXS2-H-3V TXS2-H-4.5V TXS2-H-6V TXS2-H-9V TXS2-H-12V TXS2-H-24V 1 coil latching Part No. TXS2-L-H-1.5V TXS2-L-H-3V TXS2-L-H-4.5V TXS2-L-H-6V TXS2-L-H-9V TXS2-L-H-12V TXS2-L-H-24V Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add "-1" to the end of the part number for AgPd contacts (low level load). 3. Surface-mount terminal 1) Tube packing Contact arrangement Nominal coil voltage 2 Form C 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXS2S-1.5V TXS2S-3V TXS2S-4.5V TXS2S-6V TXS2S-9V TXS2S-12V TXS2S-24V 1 coil latching Part No. TXS2S-L-1.5V TXS2S-L-3V TXS2S-L-4.5V TXS2S-L-6V TXS2S-L-9V TXS2S-L-12V TXS2S-L-24V : For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add "-1" to the end of the part number for AgPd contacts (low level load). 2) Tape and reel packing Contact arrangement Nominal coil voltage 2 Form C 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXS2S-1.5V-Z TXS2S-3V-Z TXS2S-4.5V-Z TXS2S-6V-Z TXS2S-9V-Z TXS2S-12V-Z TXS2S-24V-Z 1 coil latching Part No. TXS2S-L-1.5V-Z TXS2S-L-3V-Z TXS2S-L-4.5V-Z TXS2S-L-6V-Z TXS2S-L-9V-Z TXS2S-L-12V-Z TXS2S-L-24V-Z 2 coil latching (L2) Part No. TXS2S-L2-1.5V-Z TXS2S-L2-3V-Z TXS2S-L2-4.5V-Z TXS2S-L2-6V-Z TXS2S-L2-9V-Z TXS2S-L2-12V-Z TXS2S-L2-24V-Z 2 coil latching (LT) Part No. TXS2S-LT-1.5V-Z TXS2S-LT-3V-Z TXS2S-LT-4.5V-Z TXS2S-LT-6V-Z TXS2S-LT-9V-Z TXS2S-LT-12V-Z TXS2S-LT-24V-Z : For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. Please add "-1" to the end of the part number for AgPd contacts (low level load). (Ex. TXS2SA-1.5V-1-Z) RATING 1. Coil data 1) Single side stable Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 1.5V DC 33.3mA 45 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC 16.7mA 11.1mA 8.3mA 5.6mA 4.2mA 2.9mA 180 405 720 1,620 2,880 8,229 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) Nominal operating power Max. applied voltage (at 20C 68F) 50mW 150%V of nominal voltage 70mW All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. TX-S 2) 1 coil latching Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 1.5V DC 23.3mA 64.3 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC 11.7mA 7.8mA 5.8mA 3.9mA 2.9mA 2.1mA 257 579 1,029 2,314 4,114 11,520 50mW Coil resistance [10%] (at 20C 68F) Nominal operating power Nominal coil voltage Set voltage (at 20C 68F) 80%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 80%V or less of nominal voltage* (Initial) Nominal operating power Max. applied voltage (at 20C 68F) 35mW 150%V of nominal voltage 3) 2 coil latching (L2, LT) Nominal coil voltage Set voltage (at 20C 68F) Reset voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Set coil Reset coil 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC 80%V or less of nominal voltage* (Initial) 80%V or less of nominal voltage* (Initial) Set coil Reset coil 46.7mA 46.7mA 32.1 32.1 23.3mA 15.6mA 11.7mA 7.8mA 5.8mA 6.3mA 23.3mA 15.6mA 11.7mA 7.8mA 5.8mA 6.3mA 129 289 514 1,157 2,057 3,840 129 289 514 1,157 2,057 3,840 Set coil Reset coil 70mW 70mW 150mW 150mW Max. applied voltage (at 20C 68F) 150%V of nominal voltage *Pulse drive (JIS C 5442-1986) 2. Specifications Characteristics Contact Item Arrangement Initial contact resistance, max. Contact material Rating Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Single side stable Nominal operating 1 coil latching power 2 coil latching Insulation resistance (Initial) Electrical characteristics 750 Vrms for 1min. (Detection current: 10mA) 1,800 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) Surge breakdown voltage (Initial) Between open contacts Between contacts and coil 1,500 V (10x160s) (FCC Part 68) 2,500 V (2x10s) (Telcordia) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.) Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 5x107 (at 180 cpm) Min. 2x105 (1 A 30 V DC resistive) (at 20 cpm) Ambient temperature: -40C to +70C -40F to +158F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 2 g .071 oz Release time [Reset time] (at 20C 68F) Functional Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Conditions Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. Between open contacts Between contact and coil Between contact sets Operate time [Set time] (at 20C 68F) Expected life 50 mW (1.5 to 12 V DC), 70 mW (24 V DC) 35 mW (1.5 to 12 V DC), 50 mW (24 V DC) 70 mW (1.5 to 12 V DC), 150 mW (24 V DC) Breakdown voltage (Initial) Temperature rise (at 20C 68F) Mechanical characteristics Specifications 2 Form C Max. 100 m (By voltage drop 6 V DC 1A) Standard contact: Ag+Au clad, AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable) 1 A 30 V DC (resistive load) 30 W (DC) (resistive load) 110V DC 1A 10A 10mV DC Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (AgPd contact type or SX relays are available for low level load switching [10V DC, 10mA max. level]) *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. TX-S REFERENCE DATA 1. Maximum switching capacity 2. Life curve 3. Mechanical life 1.0 0.5 0.4 0.3 Ratio against the rated voltage, %V DC resistive load (cos = 1) No. of operations x104 Contact current, A Tested sample: TXS2-4.5V, 10 pcs. Operating speed: 180 cpm 30V DC resistive load 100 10 0.2 100 90 80 Pick-up voltage 70 Max. 60 Min. 50 40 Drop-out voltage 30 Max. 20 Min. 10 30 0 100 200 Contact voltage, V 0.5 0 1.0 Switching current, A 10 100 1,000 5,000 No. of operations, x104 4. Electrical life (1 A 30 V DC resistive load) 5-(1). Coil temperature rise Tested sample: TXS2-4.5V, 6 pcs. Operating speed: 20 cpm Tested sample: TXS2-4.5V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F, 70C 158F Change of contact resistance 100 90 90 80 Pick-up voltage 70 Max. Min. 60 50 40 30 80 70 60 50 Max. 40 Max. Min. 20 1A 1A 0A 0A 10 Min. 20 10 0 Room temperature :x +70C +158F :x 30 Drop-out voltage 20 30 Temperature rise, C 100 Contact resistance, m Ratio against the rated voltage, %V Change of pick-up and drop-out voltage 10 0 10 5 15 0 20 0 10 5 No. of operations, x104 15 0 20 90 100 110 No. of operations, x104 120 130 140 150 160 Coil applied voltage, %V 5-(2). Coil temperature rise 6-(1). Operate and release time (with diode) 6-(2). Operate and release time (without diode) Tested sample: TXS2-24V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F, 70C 158F Tested sample: TXS2-4.5V, 10 pcs. Tested sample: TXS2-4.5V, 10 pcs. 7 20 1A 1A 0A 0A 10 7 Operate time Release time 6 5 4 3 2 Max. Min. Max. Min. Operate and release time, ms Temperature rise, C Room temperature :x +70C +158F :x Operate and release time, ms 30 1 0 90 100 110 120 130 140 150 160 Coil applied voltage, %V Rate of change, % Tested sample: TXS2-4.5V, 5 pcs. -40 -20 0 30 20 Drop-out voltage x x 10 Pick-up voltage 20 40 60 80 Ambient -10 temperature, C 4 80 Min. 3 2 0 100 90 110 120 Coil applied voltage, %V Max. Max. Min. 80 90 100 110 120 Coil applied voltage, %V 8-(1). High frequency characteristics (Isolation) 8-(2). High frequency characteristics (Insertion loss) Tested sample: TXS2-4.5V, 2 pcs. Tested sample: TXS2-4.5V, 2 pcs. Isolation, dB 7. Ambient temperature characteristics 5 1 Insertion loss, dB 0 Operate time Release time 6 100 50 1.0 0.8 0.6 -20 0.4 -30 0.2 10 100 1,000 Frequency, MHz All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 10 100 Frequency, MHz 1,000 TX-S 9-(1). Malfunctional shock (single side stable) 9-(2). Malfunctional shock (latching) 10. Thermal electromotive force Tested sample: TXS2-4.5V, 6 pcs. Tested sample: TXS2-L2-4.5V, 6 pcs. Tested sample: TXS2-4.5V, 6 pcs. X' Deenergized condition Energized condition Y 1000m/s Y Y' X Z 1000m/s2 1000m/s2 1000m/s Z' X Z Z' 2 2 1000m/s X' X' 1000m/s X 1000m/s Z' x = 0.30 18 16 Z 1000m/s2 1000m/s2 2 20 Reset state Set state Y 2 2 1000m/s X' 14 Quantity X Z Z' Y Y' 12 10 8 2 6 4 1000m/s Y' 2 1000m/s Y' 2 2 0 0 0.15 0.25 0.35 0.45 0.55 Thermal electromotive force, V 11-(2). Influence of adjacent mounting 11-(3). Influence of adjacent mounting Tested sample: TXS2-4.5V, 6 pcs. Tested sample: TXS2-4.5V, 6 pcs. Tested sample: TXS2-4.5V, 6 pcs. ON 10 5 Pick-up voltage ON Drop-out voltage Rate of change, % Rate of change, % 0 OFF OFF -5 OFF -15 ON 10 ON 5 Pick-up voltage ON 0 Drop-out voltage 0 -5 -15 2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance , mm inch ON 10 ON 5 Pick-up voltage ON ON Drop-out voltage OFF -5 OFF -10 OFF OFF 0 15 0 OFF -10 -10 Rate of change, % ON 15 Rate of change, % 15 Rate of change, % Rate of change, % 11-(1). Influence of adjacent mounting -15 2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance , mm inch OFF 0 OFF 2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance , mm inch 12. Pulse dialing test 0.08 F DC48V - 458 0.08 F 458 Wire spring relay 4 3 Ratio against the rated voltage, %V + Change of pick-up and drop-out voltage Change of contact resistance 100 100 90 80 Pick-up voltage Max. Min. 70 60 50 40 Drop-out voltage 30 Max. Min. 20 10 0 Contact resistance, m (35 mA 48V DC wire spring relay load) Tested sample: TXS2-4.5V, 6 pcs. 90 80 70 60 50 40 Max. 30 Min. 20 10 0 10 20 30 40 No. of operation, x10 50 0 4 Note: Data of surface-mount type are the same as those of PC board terminal type. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 0 10 20 30 40 No. of operation, x104 50 TX-S DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac 1. Standard PC board terminal and Self clinching terminal CAD Data External dimensions (General tolerance: 0.3 .012) Single side stable and 2 coil latching type (L2, LT) 1 coil latching type Type 15.00 .591 7.40 .291 0.50 .020 1.15 .045 5.08 .200 0.65 .026 8.20 .323 0.50 .020 1.15 .045 0.25 5.08 .010 .200 3.50 .138 2.54 .100 15.00 .591 5.08 .200 0.50 .020 1.15 .045 5.08 .200 15.00 .591 7.40 .291 0.50 .020 1.15 .045 0.25 5.08 .010 .200 10.16 .400 2.54 .100 12.7 .500 2.54 .100 5.08 .200 7.40 .291 8-1.0 dia. 8-.039 dia. 0.65 8.20 .026 .323 3.50 .138 2.54 .100 0.25 5.08 .010 .200 3.50 .138 2.54 .100 0.65 .026 8.20 .323 Self clinching terminal 2 coil latching type (L2, LT) 7.40 .291 15.00 .591 0.65 8.20 .026 .323 Standard PC board terminal PC board pattern (Bottom view) (Tolerance: 0.1 .004) Single side stable and 1 coil latching type 5.08 .200 10-1.0 dia. 10-.039 dia. 3.50 .138 5.08 .200 (1.15) 2.54 (.045) .100 0.25 5.08 .010 .200 Schematic (Bottom view) Single side stable + - 1 12 1 coil latching 3 4 5 - + 10 9 8 Direction indication 1 2 coil latching (L2) 3 4 5 12 10 9 8 Direction indication (Deenergized condition) (Reset condition) 1 3 4 5 6 + - + - 12 10 9 8 7 2 coil latching (LT) + 1 - 12 3 4 5 6 10 9 8 7 Direction indication Direction indication (Reset condition) (Reset condition) + - 2. Surface-mount terminal CAD Data External dimensions (General tolerance: 0.3 .012) Type Single side stable and 1 coil latching type 15 .591 8.2 8.4 .323 .331 0.5 .020 0.65 .026 5.08 .200 15 .591 7.4 .291 SA type 2.54 .100 5.08 .200 9.40.5 .370.020 8.2 8.4 .323 .331 0.5 .020 0.65 .026 5.08 .200 2.54 .100 0.65 .026 0.5 .020 5.08 .200 2.54 .100 0.25 .010 0.65 .026 0.5 .020 5.08 .200 2.54 .100 15 .591 7.4 .291 0.65 .026 0.5 .020 5.08 .200 2.54 .100 5.08 .200 7.40.5 .291.020 5.08 .200 9.40.5 .370.020 0.5 .020 5.08 .200 2.54 .100 5.08 .200 7.40.5 .291.020 5.08 .200 5.08 .200 2.54 .100 7.24 .285 1 3.16 .039 .124 5.08 .200 2.54 .100 7.24 .285 7.24 .285 1 2.16 .039 .085 0.25 .010 1 3.16 .039 .124 2.54 .100 0.25 .010 7.4 .291 0.65 .026 2.54 .100 2 coil latching type (L2, LT) 7.24 .285 1 3.16 .039 .124 8.2 Max.10 .323 .394 0.25 .010 5.08 .200 0.25 .010 7.4 .291 8.2 Max.10 .323 .394 SS type 1 3.16 .039 .124 8.2 Max.10 .323 .394 5.08 .200 9.40.5 .370.020 15 .591 5.08 .200 9.40.5 .370.020 15 .591 8.2 Max.10 .323 .394 SL type Single side stable and 1 coil latching type 7.4 .291 0.25 .010 7.4 .291 15 .591 Suggested mounting pad (Top view) (Tolerance: 0.1 .004) 2 coil latching type (L2, LT) 5.08 .200 2.54 .100 1 2.16 .085 .039 6.24 .246 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 5.08 .200 2.54 .100 6.24 .246 TX-S Schematic (Top view) Single side stable 12 10 9 8 1 3 4 5 1 coil latching 12 10 9 8 1 3 4 5 Direction indication Direction indication (Deenergized condition) (Reset condition) 2 coil latching (L2) 12 10 9 8 7 1 3 4 5 6 2 coil latching (LT) 12 10 9 8 7 1 3 4 5 6 Direction indication Direction indication (Reset condition) (Reset condition) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Orientation (indicates PIN No.1) stripe Stopper (gray) Stopper (green) 2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 4.9 N {500gf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less A C B mm inch 1.5 Relay polarity bar .059 (Z type) +0.1 0 +.004 0 dia. dia. 2.0 .079 1.75 .069 4.0 .157 0.4 .016 C A B D 11.5 .453 16.0 10.0 .394 .630 Relays 15.5 .610 24.0 0.3 0.2 .945 .012 9.2.008 .362 Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. Tape coming out direction (ii) SL type mm inch 1.5 +0.1 0 dia. Relay polarity bar .059 +.004 dia. 2.0 0 (Z type) .079 1.75 .069 4.0 .157 0.4 .016 For general cautions for use, please refer to the "Cautions for use of Signal Relays" or "General Application Guidelines". 11.5 .453 15.5 .610 16.0 .630 Relays 10.0 .394 Tape coming out direction 24.0 0.3 .945 .012 0.2 10.8.008 .425 (iii) SS type mm inch 1.5 Relay polarity bar .059 (Z type) +0.1 0 +.004 0 dia. dia. 2.0 .079 4.0 .157 1.75 .069 0.4 .016 11.5 .453 15.5 .610 16.0 .630 Relays Tape coming out direction 8.0 24.0 0.3 .012 .315 .945 10.80.2 .425.008 (2) Dimensions of plastic reel mm inch 2.0 .079 13 dia. .512 dia. 21 dia. .827 dia. 380 dia. 14.961 dia. 80 dia. 3.150 dia. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.