GBL02 ........ GBL10 4.0 Amp. Glass Passivated Bridge Rectifiers 3.70 3.30 20.3 19.7 C2.5 11.3 10.7 2.70 2.30 1.20 0.80 1.70 1.30 14.0 13.0 2.70 2.30 MECHANICAL DATA Case: Molded plastic body. Terminals: Pure tin plated, Lead free, leads solderable per MIL-STD-750, Method 2026. Weight: 0.071 ounce, 2.0 grams Mounting position: Any 2 3 4 5.20 5.20 5.20 4.80 4.80 4.80 1 2 Glass passivated chip junction Ideal for printed circuit board High case dielectric strength Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Typical IR less than 0.1A High surge current capability High temperature soldering guaranteed: 260 C / 10 seconds / 9.5mm, lead lengths. 0.60 0.40 1.10 0.90 1 Current 4.0 A Voltage 200 V to 1000 V GBL Dimensions in mm. 3 4 Maximum Ratings and Electrical Characteristics at 25 C GBL 04 400 GBL 06 600 GBL 08 800 GBL 10 1000 VRRM Maximum Recurrent Peak Reverse Voltage (V) GBL 02 200 VRMS Maximum RMS Voltage (V) 140 280 420 560 700 VDC Maximum DC Blocking Voltage (V) 200 400 600 800 1000 IF(AV) Maximum Average Forward Rectified Current @ Tc = 50 C (Note 1) @ TA = 40 C (Note 2) 4.0 A 3.0 A IFSM Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Method) Tj = 150 C 120 A I 2t Rating for fusing (t<8.3 ms) Cj Typical Junction Capacitance Per Leg at 4.0V, 1 MHz Tj Operating Temperature Range -55 to +150 C Tstg Storage Temperature Range -55 to +150 C 60 A2sec 95 pF 40 pF Electrical Characteristics at Tamb = 25 C VF Maximum Instantaneous Forward Voltage @ = 2.0 A @ = 4.0 A IR Maximum DC Reverse Current at Rated DC Blocking Voltage Rth (j-a) Typical Thermal Resistance Per Leg (Note 1) 22 C/W Rth (j-l) (Note 2) 3.5 C/W @ TA = 25 C @ TA =125C 1.0 V 1.1 V 5.0 A 500 A Notes: 1. Unit Mounted on 50.8mm x 76.2mm x 6.35mm Al plate. 2. Units Mounted on P.C.B. 12 x 12mm Copper Pads, 9.5mm Lead Length Jun - 10 GBL02 ........ GBL10 TYPICAL FORWARD VOLTAGE CHARACTERISTICS PER LEG IF(AV), average forward current (A) DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 100 10 1 0.1 0.01 0.4 IFSM, peak forward surge current (A) Tj = 25 C PULSE WIDTH = 300 s 1% DUTY CYCLE 0.6 0.8 1.2 1.0 1.4 5.0 60 Hz Resistive or Inductive Load 4.0 Heat-Sink Mounting 50.8 x 76.2 x 6.35mm Aluminum Substrate 3.0 2.0 P.C.B. Mounting 12 x 12mm Copper pads with 9.5mm Lead Length 1.0 0 0 1.6 50 100 150 VF, instantaneous forward voltage (V) Tamb, ambient temperature (C) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TYPICAL JUNCTION CAPACITANCE PER LEG 1000 120 Cj, junction capacitance (pF) IF, instantaneous forward current (A) Rating And Charasterictic Curves Tj = 40 C Single Half Sine Wawe (JEDEC Method) 80 40 1 Cycle 0 10 1 100 Number of cycles Tj = 25 C f = 1 MHz Vsig = 50mVp-p 100 200 - 400V 600 - 1000V 10 0.1 1 10 100 VR, reverse voltage (V) TYPICAL REVERSE CHARACTERISTICS IR, Instantaneous reverse leakage current (A) 500 100 Tj = 125 C 10 200 - 400V 600 - 1000V 1 0.1 Tj = 25 C 0.01 0 20 40 60 80 100 Percent of rated peak reverse voltage (%) Jun - 10