Surface Mount Schottky Diode COMCHIP www.comchip.com.tw BAT54 Series -G Voltage: 30 Volts Current: 200mA Features Low Turn-on Voltage Fast Switching PN Junction Guard Ring for Transient and ESD Protection SOT-23 .119 (3.0) .110 (2.8) .020 (0.5) .056 (1.40) .047 (1.20) 2 1 CATHODE 1 3 1 CATHODE ANODE 3 .037(0.95) .037(0.95) ANODE 2 CATHODE ANODE ANODE CATHODE 1 CATHODE 3 1 3 2 CATHODE .006 (0.15)max. BAT54A-G BAT54-G Top View 3 .020 (0.5) 2 ANODE ANODE BAT54C-G .044 (1.10) .035 (0.90) Case: SOT-23, Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Polarity: See Diagrams Below Weight: 0.008 grams (approx.) Mounting Position: Any .006 (0.15) .002 (0.05) Mechanical data .103 (2.6) .086 (2.2) .020 (0.5) CATHODE Dimensions in inches (millimeters) BAT54S-G Maximum Ratings (TA = 125C unless otherwise noted) Rating Reverse Voltage Forward Power Dissipation @ TA = 25C Derate above 25C Forward Current (DC) Symbol VR IF Value 30 225 1.8 200 Max Units Volts mW mW/C mA Junction Temperature TJ 125 Max C Storage Temperature Range Tstg -55 to +150 C PF Electrical Characterics (TA = 25C unless otherwise noted) (EACH DIODE) Parameter Symbol Min V(BR)R Reverse Breakdown Voltage (IR = 10 mA) 30 CT Total Capacitance (VR = 1.0 V, f = 1.0 MHz) -- Typ -- Max -- 7.60 10.0 pF 0.50 0.22 0.41 0.52 2.0 0.24 0.5 1.0 mAdc -- 5.0 ns 0.32 0.40 200 300 mAdc mAdc 600 mAdc IR -- VF -- trr -- VF -- Repetitive Peak Forward Current IF IFRM -- -- 0.29 0.35 -- -- Non-Repetitive Peak Forward Current (t < 1.0 s) IFSM -- -- Reverse Leakage (VR = 25 V) Forward Voltage (IF = 0.1 mAdc) (IF = 30 mAdc) (IF = 100 mAdc) Reverse Recovery Time (IF = IR = 10 mAdc, IR(REC) = 1.0 mAdc) Figure 1 Forward Voltage (IF = 1.0 mAdc) (IF = 10 mAdc) Forward Current (DC) "-G" suffix designates RoHS compliant Version Unit Volts Vdc Vdc Page 1 Surface Mount Schottky Diode COMCHIP www.comchip.com.tw RATING AND CHARACTERISTIC CURVES (BAT54 Series-G) 820 +10 V 2k 0.1 F tr IF 100 H 0.1 F tp IF t trr 10% t DUT 50 utput Pulse Generator 50 Input Sampling Oscilloscope 90% IR(REC) = 1 mA IR VR Output Pulse (IF = IR = 10 mA; measured at IR(REC) = 1 mA) Input Signal Notes: 1. A 2.0 k variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: 3. tp trr Figure 1. Recovery Time Equivalent Test Circuit 100 1000 TA = 150C IR , Reverse Current (A) IF, Forward Current (mA) 100 1 50C 10 1 25C 1.0 85C 25C 0.1 0.0 - 40C TA = 125C 10 1.0 TA = 85C 0.1 0.01 - 55C TA = 25C 0.001 0.1 0.2 0.3 0.4 0.5 0 0.6 5 V F, Forward Voltage (V) Figure 2. Forward Voltage 10 15 20 VR, Reverse Voltage (V) Figure 3. Leakage Current 14 C T , Total Capacitance (pF) 12 10 8 6 4 2 0 0 5 10 15 20 VR, Reverse Voltage (V) Figure 4. Total Capacitance "-G" suffix designates RoHS compliant Version 25 30 25 30