Power Dividers and Splitters Power Dividers and Splitters 131 Agilent 11636A,B power dividers These power dividers provide good match and excellent tracking characteristics from dc to 26.5 GHz. Power dividers are recommended for applications such as transmission line fault testing, as well as power combining. They are not recommended for ratio and leveling applications. Input 39.9 (1.57) 27.9 (1.10) Agilent 11636A 16.3 (0.64) Output 41.7 (1.64) Output 3.6 (0.14) 0 19.6 (0.77) 44.5 (1.75) 13.2 (0.52) Agilent 11636B 17.5 (0.69) Dimensions are in mm (inches) nominal, unless otherwise specified. 3.2 (0.125) Diameter 2 Places 9.7 (0.38) 47.0 (1.85) Dimensions are in mm (inches) nominal, unless otherwise specified. Agilent 87302C Specifications Agilent 87302/303/304C hybrid power dividers These power dividers are designed for power splitting applications that require minimal insertion loss and high isolation between ports. They are available in three models that cover multi-octave bands to 26.5 GHz. Models with narrower frequency coverage have less insertion loss. Hybrid dividers have insertion loss between the main line and output port which is 1 to 2 dB less than equivalent resistive power splitters. Designed for critical signal processing applications, phase and amplitude tracking between the two output ports is controlled and specified. Agilent model 11636A 11636B 87302C 87303C 87304C Frequency range (GHz) Max. SWR Maximum insertion loss (dB) dc to 18 dc to 26.5 0.5 ST 26.5 ST 1.0 to 18 18 to 26.5 2.0 to 18 18 to 26.5 1.35 1.29 1.45 1.60 1.45 1.60 1.45 1.60 6.0 typ. 2 7.5 1.5 1.9 1.2 1.6 1.1 1.4 Minimum Maximum Maximum isolation amplitude phase (dB) tracking (dB) 1 tracking deg) 1 19 19 19 21 19 18 0.5 3 0.25 3 0.3 0.5 0.3 0.5 0.3 0.5 2 typ. 2 typ. 6 10 6 10 6 10 Power Rating: 10 watts 87302C/3C/4C, 1 watt CW 11636A/B, (2:1 maximum load SWR) Connectors: 3.5 mm (f), (SMA compatible) Weight: 170 g (6 oz) net, 340 g (12 oz) shipping 1 Amplitude and phase tracking are the ratio of one output to the other in dB or degrees, respectively. 5.8 to 7.2 dB up to 10 GHz; 5.8 to 7.5 dB up to18 GHz. 3 at 18 GHz. 2 13 132 Power Dividers and Splitters Power Dividers and Splitters Agilent 87302/303/304C A B 12.192 typ. (0.48) C 12.7 25.4 (0.50) (1.00) 18.542 (0.730) 3.429 (0.135) 3.5 mm Female 3 Places 3.16 (0.125)o Agilent model A B C 87302C 28.702 (1.13) 26.162 (1.03) 28.702 (1.13) 139.7 (5.50) 2.10 (53.34) 0.00 (0.00) 87303C 13.206 (0.52) 5.604 (0.26) Dimensions are in mm (inches) nominal, unless otherwise specified. 87304C 196.85 (7.75) 105.41 (4.15) 57.15 (2.25) Dimensions are in mm (inches) nominal, unless otherwise specified. Agilent 11667B Agilent 11667A Agilent 11667A,B power splitters These power splitters feature excellent match and tracking between outputs, operating from dc to 26.5 GHz. Power splitters are recommended for external source leveling and ratio measurements. Top view Agilent 11667C 12.7 (0.5) 120 degrees 13 2.5 (0.1) 22.2 (0.87) 4.32 (0.17) 17.5 (0.69) 21.31 (0.86) 12.0 (0.47) Radius 35.2 (1.39) Side view 5.0 (0.2) 10.0 (0.39) Agilent 11667C power splitter This two-resistor power splitter is recommended for applications that require external source leveling, or for ratio measurements. It covers the entire dc to 50 GHz frequency band by use of 2.4 mm connectors and advanced micro-circuitry for the resistive components. These two-resistor type splitters provide excellent output SWR at the auxiliary arm when used for source leveling or ratio measurement applications. The tracking between output arms over a frequency range from dc to 50 GHz allows wideband measurements to be made with a minimum of uncertainty. Dimensions are in mm (inches) nominal, unless otherwise specified. www.agilent.com/find/accessories Power Dividers and Splitters Power Dividers and Splitters 133 Agilent 11850C,D power splitter Agilent 11850C,D These three-way power splitters are designed for source leveling or ratio measurements. One output port provides the reference for a leveling or ratio detector, while the other two ports can be used for two independent transmission measurements or a comparison measurement. Specifications Maximum input power 0.5 W Nominal Insertion loss (input to either output) 7 dB Agilent model 11667A Option 001 Option 002 11667B Frequency range dc to 18.0 GHz dc to 26.5 GHz Equivalent output SWR (nominal 50 ) 1.10: dc to 4 GHz 1.20: dc to 8 GHz 1.33: dc to 18 GHz 1.22 Tracking between any two ports 0.20 dB to 8 GHz 0.25 dB to 18 GHz Shipping weight lb (kg) 0.2 (0.5) 0.5 W 7 dB <0.25 dB Connectors N (f) all ports Opt. 001: N (m) in, N (f) out Opt. 002: N (f) in, APC-7 out 3.5 mm (f) all ports 11667C dc to 50 GHz 1.65 0.5 W 8.5 dB <0.40 dB 2.4 mm (f) all ports 11850C dc to 3.0 GHz 1.22 0.1 W 9.5 dB + 1 dB/GHz +0.25 dB, 3 N (f) 50 all ports 0.2 (0.5) 11850D dc to 2 GHz 1.09 7.8 dB 0.2 dB, 2.5 N (f) 50 in 0.2 (0.5) 0.14 (0.3) 0.14 (0.3) N (f) 75 out N female 2 places Dimensions are in mm (inches) nominal, unless otherwise specified. J1 N male P1 J2 Agilent 0955-0751 35.1 typ. ( 1.38 ) Agilent 0955-0751 power splitter This power splitter is recommended for most 50 economy network analyzer applications. A two resistor splitter provides excellent output SWR at the auxiliary arm over frequency allowing wideband measurements to be made with minimum uncertainty. The frequency range is 300 KHz to 3 GHz. Tracking flatness between output areas is within 0.25 dB and 3 degrees of phase. Equivalent source match is 25 dB to 2 GHz and 20 dB to 3 GHz. Insertion loss is 6 dB nominal. Input port match is 20 dB to 3 GHz. Connectors are type-N (f) output and type-N (m) input. Power rating is 1 watt. 25.4 ( 1.00 ) Agilent 0955-0751 Agilent 0955-0752 power splitter This 75 power splitter has a frequency range from 300 KHz to 3 GHz. Tracking flatness is within 0.25 dB and 3 degrees of phase. Equivalent source match is 25 dB to 2 GHz and 20 dB to 3 GHz. Insertion loss is 6 dB nominal. Input port match is 20 dB to 3 GHz. Connectors are type-N (m) input, type-N (f) output. Power rating is 1 watt. 13