CPC1019N Single-Pole, Normally Open 4-Lead SOP OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current Load Current, Peak AC Rating 60 750 1 Units VP mA On-Resistance (max) LED Current to operate 0.6 2 Description CPC1019N is a miniature, low-voltage, low on-resistance, single-pole, normally open (1-Form-A) solid state relay in a small 4-lead SOP package. A Embodying IXYS Integrated Circuits Division's patented OptoMOS technology, the CPC1019N comprises a highly efficient GaAlAs infrared LED that is optically coupled to efficient MOSFET output switches to provide 1500Vrms of input-to-output isolation. mA Features * * * * * * * * * * * * Low On-Resistance: 0.6 Low Drive Current: 2mA High Load Current: 750mA 1500Vrms Input/Output Isolation 100% Solid State Compact 4-Lead SOP Package TTL/CMOS Compatible input Arc-Free With No Snubbing Circuits No EMI/RFI Generation Immune to Radiated EM Fields SMD Pick & Place, Wave Solderable Tape & Reel Version Available IXYS Integrated Circuits Division's state of the art double-molded vertical construction packaging produces a very compact solid state relay that is ideal for replacing larger, less-reliable reed and electromechanical relays. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications Ordering Information * Security * Passive Infrared Detectors (PIR) * Data Signalling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Utility Meters (gas, oil, electric and water) * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls * ATE Part # CPC1019N CPC1019NTR Description 4-Lead SOP (100/tube) 4-Lead SOP (2000/reel) Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD Pb DS-CPC1019N-R03 ton e3 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1019N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous Continuous, AC Peak Peak On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 2 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 2 Conditions Symbol Min Typ Max Units IF=2mA IL ILPK RON ILEAK - 0.35 - 750 1 3 0.6 1 mADC A AP t < 10ms IL=750mA VL=60VP VL=50V, f=1MHz ton toff COUT - 0.4 0.4 60 3 3 - ms ms pF IL=750mA IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.15 0.14 1.2 - 2 1.4 10 mA mA V A - CI/O - 1 - pF IF=5mA, VL=10V A Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a LED drive current of 4mA is recommended. www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC1019N PERFORMANCE DATA* Typical Turn-Off Time Distribution (N=50, IF=5mA, IL=100mA, TA=25C) 25 20 20 15 10 5 0 15 10 5 0.385 0.435 0.485 0.535 Turn Off Time (ms) 0.38 25 35 0.40 0.41 0.42 Turn On Time (ms) 10 5 Typical Blocking Voltage Distribution (N=50, TA=25C) 25 20 15 10 74.5 2.5 1.3 1.2 IF=5mA IF=2mA 1.1 0 20 40 60 Temperature (C) 80 1.0 0.5 2.0 0.25 0.20 0.15 0.10 -40 1.5 -20 0 20 40 60 Temperature (C) 80 100 1.255 1.260 1.265 LED Forward Voltage (V) 1.270 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 0.39 0.38 0.37 0.36 0.35 0.34 0 Typical LED Current to Operate vs. Temperature (IL=500mA) 5 0.40 2.0 100 10 0.41 10 20 30 40 LED Forward Current (mA) 0 50 Typical Turn-On Time vs. Temperature (IL=100mA) IF=2mA 1.5 1.0 IF=5mA 0.5 0.0 -40 -20 0 20 40 60 Temperature (C) 80 100 0.8 Turn-Off Time (ms) 0.30 -20 15 1.250 0.0 Turn-On Time (ms) 1.0 -40 0.36 20 77.0 Turn-Off Time(ms) 1.4 Turn-On Time (ms) 1.5 75.0 75.5 76.0 76.5 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=100mA) Typical LED Forward Voltage Drop vs. Temperature IF=50mA IF=20mA IF=10mA 0.33 0.34 0.35 On-Resistance (:) 0 0.180 1.6 0.32 LED Forward Voltage Distribution (N=50, IF=5mA, TA=25C) 25 0 0.120 0.135 0.150 0.165 LED Current (mA) 5 0.31 5 0.105 10 0.43 Device Count (N) Device Count (N) 15 0 LED Forward Voltage (V) 0.39 30 20 15 0 0.585 Typical IF for Switch Operation (N=50, IL=100mA, TA=25C) Device Count (N) 20 0 0.335 LED Current (mA) Typical On-Resistance Distribution (N=50, IF=2mA, IL=0.75A, TA=25C) Device Count (N) 25 Device Count (N) Device Count (N) Typical Turn-On Time Distribution (N=50, IF=5mA, IL=100mA, TA=25C) 10 20 30 40 LED Forward Current (mA) 50 Typical Turn-Off Time vs. Temperature (IL=100mA) 0.7 IF=5mA 0.6 0.5 IF=2mA 0.4 0.3 0.2 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1019N PERFORMANCE DATA* Typical Load Current vs. Load Voltage (IF=2mA) 1000 0.70 250 0 -250 -500 -750 0.55 0.50 0.45 0.40 0.35 0.4 80 78 70 Leakage Current (nA) 79 77 76 75 74 -20 0 20 40 60 Temperature (C) 80 100 0 20 40 60 Temperature (C) 80 600 550 100 -40 Typical Leakage Current vs. Temperature (VL=60V) 3.5 -20 0 20 40 60 Temperature (C) 80 100 10s 100s Energy Rating Curve (IF=2mA) 3.0 60 50 40 30 20 2.5 2.0 1.5 1.0 0.5 10 0 -40 650 450 -20 Load Current (A) 0.3 0.25 -40 700 500 0.30 Typical Blocking Voltage vs. Temperature Blocking Voltage (VP) 750 0.60 Load Current (mA) On-Resistance (:) Load Current (mA) 500 73 -40 800 0.65 750 -1000 -0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 Load Voltage (V) Maximum Load Current vs. Temperature (IF=2mA) Typical On-Resistance vs. Temperature (IF=2mA, IL=500mA) -20 0 20 40 60 Temperature (C) 80 100 0.0 10Ps 100Ps 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC1019N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1019N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1019N 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1019N MECHANICAL DIMENSIONS CPC1019N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Lead to package standoff: 0.0637 0.0383 (0.0025 0.0015) 0.762 0.102 (0.030 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1019NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1019N-R03 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/13/2012