DSC1001 Low-Power Precision CMOS Oscillator 1.8~3.3V Features General Description The DSC1001 is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages and temperatures. The device operates from 1 to 150MHz with supply voltages between 1.8 to 3.3 Volts and temperature ranges up to -40C to 105C. The DSC1001 incorporates an all silicon resonator that is extremely robust and nearly immune to stress related fractures, common to crystal based oscillators. Without sacrificing the performance and stability required of today's systems, a crystal-less design allows for a higher level of reliability, making the DSC1001 ideal for rugged, industrial, and portable applications where stress, shock, and vibration can damage quartz crystal based systems. Available in industry standard packages, the DSC1001 can be "dropped-in" to the same PCB footprint as standard crystal oscillators. Frequency Range: 1 to 150MHz Exceptional Stability over Temperature o 10 PPM, 25 PPM, 50 PPM Operating voltage o 1.7 to 3.6V Operating Temperature Range o Ext. Industrial -40C to 105C o Industrial -40C to 85C o Ext. Commercial -20C to 70C o Commercial 0C to 70C Low Operating and Standby Current o 5mA Operating (40MHz) o 15uA Standby Ultra Miniature Footprint o 2.5 x 2.0 x 0.85 mm o 3.2 x 2.5 x 0.85 mm o 5.0 x 3.2 x 0.85 mm o 7.0 x 5.0 x 0.85 mm MIL-STD 883 Shock and Vibration Resistant Pb Free, RoHS, Reach SVHC Compliant AEC-Q100 Reliability Qualified Benefits Block Diagram VDD Resonator Output Pin for pin "drop in" replacement for industry standard oscillators Semiconductor level reliability, significantly higher than quartz Longer Battery Life / Reduced Power Compact Plastic package Cost Effective VCO PFD Applications Frac-N PLL Standby# (pin1) Page 1 GND Mobile Applications Consumer Electronics Portable Electronics DVR, CCTV, Surveillance Cameras Low Profile Applications Industrial Applications MK-Q-B-P-D-050610-01-8 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Absolute Maximum Ratings1 Item Min Max Unit Input Voltage -0.3 VDD+0.3 V Junction Temp - +150 C Storage Temp -55 +150 C Soldering Temp - +260 C ESD - DSC1001 Condition 4000 200 CDM 1500 - 032.0000 T Family Package, Temp & Stability 40 sec max. Tape/ Reel Output Freq 1.0 to 150MHz V HBM MM CE1 * See Ordering Information for details Ordering Code Recommended Operating Conditions Parameter Symbol Range Supply Voltage VDD 1.7 - 3.6V Output Load ZL R>10K, C15pF Operating Temperature Option 1 Option 2 Option 3 Option 4 T -40 to +105 C -40 to +85 C -20 to +70 C 0 to +70 C Specifications (VDD = 1.8 to 3.3v) TA=850C unless otherwise specified Parameter Symbol Condition Min Frequency f0 Single Frequency 1 Frequency Tolerance f Aging f Supply Current, standby Typ Max Unit 150 MHz 10,25,50 ppm 1 year @25C 5 ppm IDD T=25C 15 uA Output Logic Levels Output logic high Output logic low VOH VOL -4mA 4mA 0.2*VDD Volts Output Startup Time2 tSU T=25C 1.0 1.3 ms Output Disable Time tDA 20 100 ns Includes frequency variations due to initial tolerance, temperature and power supply voltage 0.8*VDD - Output Duty Cycle SYM 45 55 % Input Logic Levels Input logic high Input logic low VIH VIL 0.75*VDD - 0.25* VDD Volts Page 2 MK-Q-B-P-D-050610-01-8 DSC1001 1.8~3.3V Low-Power Precision CMOS Oscillator VDD = 1.8v Parameter Supply Current, no load Symbol IDD Condition 1MHz CL=0p 27MHz RL= 70MHz T=25C 150MHz Min Typ 6.0 6.5 7.2 8.3 Max 6.3 6.9 7.5 9.1 3 3 Output Transition time Rise Time Fall Time tR tF CL=15pF; T=25C 20%/80%*VDD 1.8 1.0 Jitter, Max Cycle to Cycle JCC F = 100MHz3 60 Unit mA ns Ps VDD = 2.5v Parameter Supply Current, no load Symbol IDD Condition 1MHz CL=0p 27MHz RL= 70MHz T=25C 150MHz Min Typ 6.0 6.7 7.7 9.6 Max 6.3 7.0 8.1 10.6 2 2 Output Transition time Rise Time Fall Time tR tF CL=15pF; T=25C 20%/80%*VDD 1.0 0.9 Jitter, Max Cycle to Cycle JCC F = 100MHz3 50 Unit mA ns ps VDD = 3.3v Parameter Supply Current, no load Output Transition time Rise Time Fall Time Jitter, Max Cycle to Cycle Symbol IDD tR tF JCC Condition 1MHz CL=0p 27MHz RL= 70MHz T=25C 150MHz CL=15pF; T=25C 20%/80%*VDD F = 100MHz3 Min Typ 6.0 6.8 8.2 10.8 Max 6.3 7.2 8.7 12.2 1.0 0.9 50 2 2 Unit mA ns ps Notes: 1. Absolute maximum ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated beyond these limits. 2. tSU is time to stable output frequency after VDD is applied. tSU and tEN (after EN is asserted) are identical values. 3. Measured over 50k clock cycles. Page 3 MK-Q-B-P-D-050610-01-8 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Nominal Performance Characteristics Supply Current Supply Current 16 Vdd = 3.65V Ta = 25C 20 0pF 8pF 15pF Supply Current (mA) Supply Current (mA) 24 16 12 8 4 0 Vdd = 1.65V Ta = 25C 12 50 100 Frequency (MHz) 4 150 0 50 100 Frequency (MHz) 150 Fall Time 2 2 Vdd = 3.3V 1.5 -40C 25C 85C Vdd = 3.3V 1.5 Fall Time (ns) Rise Time (ns) 15pF 8 Rise Time 1 0.5 -40C 25C 85C 1 0.5 0 0 0 50 100 Frequency (MHz) 0 150 50 100 Frequency (MHz) 150 Fall Time Rise Time 2 2 Vdd = 1.8V -40C 25C 85C Vdd = 1.8V 1.5 Fall Time (ns) 1.5 Rise Time (ns) 8pF 0 0 1 0.5 -40C 25C 85C 1 0.5 0 0 0 Page 4 0pF 50 100 Frequency (MHz) 150 0 50 100 Frequency (MHz) 150 MK-Q-B-P-D-050610-01-8 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Output Waveform tR tF VOH Output VOL tEN 1/fo tDA VIH Standby# VIL Standby Function Standby# Output (pin 1) (pin 3) Hi Level Output ON Open (no connect) Output ON Low Level High Impedance Test Circuit IDD VDD 0.01uF 4 3 1 2 15pF *VSD *VSD = Standby# Logic Level Input Page 5 MK-Q-B-P-D-050610-01-8 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Board Layout (recommended) Solder Reflow Profile 20-40 Sec MSL 1 @ 260C refer to JSTD-020C Ramp-Up Rate (200C to Peak Temp) 3C/Sec Max. Preheat Time 150C to 200C 60-180 Sec Time maintained above 217C 60-150 Sec 255-260C Peak Temperature Time within 5C of actual Peak 20-40 Sec 6C/Sec Max. Ramp-Down Rate Time 25C to Peak Temperature 8 min Max. Se 3C / 217C 200C 60-150 Sec S 6C/ ec 3C / Se cM ax . Reflow 25C 60-180 Sec x. 150C Ma Temperature (C) cM ax . 260C Cool Pre heat Time 8 min max Package Dimensions 7.0 x 5.0 mm Plastic Package External Dimensions 7.00.10 [0.2760.004] #4 Recommended Land Pattern* 5.08 [0.200] 5.08 [0.2] #3 #3 #4 2.6 [0.102] 2.6 [0.102] 3.5 [0.138] 0.2 [0.008] 2.2 [0.087] #1 #2 5.00.10 [0.1970.004] #2 1.4 [0.055] 0.2 [0.008] #1 0.850.05 [0.0330.002] Page 6 o o o o o 1.4 [0.055] 0.2 [0.008] 1.4 [0.055] 1.2 [0.047] No. 1 2 3 4 o Pin Terminal Standby# GND Output VDD *Note: The center pad is not connected internally and should be left unconnected or tied to GND. units: mm [inch] MK-Q-B-P-D-050610-01-8 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator 5.0 x 3.2 mm Plastic Package External Dimensions 2.54 [0.100] 2.54 [0.100] 50.10 [0.1970.004] #4 Recommended Land Pattern #3 #4 #3 1.2 [0.047] 2.1 [0.083] 0.2 [0.008] 1.1 [0.043] 0.1 [0.004] #2 1.2 [0.047] #1 #2 3.20.10 [0.1260.004] #1 0.1 [0.004] 1.2 [0.047] 0.9 [0.035] No. 1 2 3 4 0.850.05 [0.0330.002] Pin Terminal Standby# GND Output VDD units: mm [inch] 3.2 x 2.5 mm Plastic Package External Dimensions 3.20.05 [0.1260.002] #4 Recommended Land Pattern 2.1 [0.083] 2.1 [0.083] #3 #3 #4 0.9 [0.035] 0.9 [.035] 1.0 [0.039] CO.25 #1 #2 #2 0.90.05 [0.0350.002] #1 2.50.05 [0.0980.002] 0.80.1 [0.0310.004] 0.850.05 [0.0330.002] Page 7 No. 1 2 3 4 Pin Terminal Standby# GND Output VDD 0.2 [0.008] 0.9 [0.035] units: mm [inch] MK-Q-B-P-D-050610-01-8 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator 2.5 x 2.0 mm Plastic Package External Dimensions 2.50.05 [0.0980.002] #4 Recommended Land Pattern 1.65 [0.065] 1.65 [0.065] #3 #3 #4 0.7 [0.028] 0.7 [0.028] 0.85 [0.033] CO.25 #1 #2 2.00.05 [0.0790.002] #2 0.650.05 [0.0260.002] #1 0.2 [0.008] 0.65 [0.026] 0.650.10 [0.0260.004] No .1 2 3 4 0.850.05 [0.0330.002] Pin Terminal Standby# GND Output VDD units: mm [inch] Ordering Information DSC1001 PTS - xxx.xxxx T PART NUMBERING GUIDE Package (Plastic QFN) P=A: P=B: P=C: P=D: 7.0x5.0mm 5.0x3.2mm 3.2x2.5mm 2.5x2.0mm Temperature T=C: 0o ~ +70o C T=E: -20o ~ +70o C T=I: -40o ~ +85o C T=L: -40o ~ +105o C Stability Frequency Packing Option S=1: 50ppm S=2: 25ppm S=5: 10ppm XXX.XXXX - Blank: Tubes T: Tape & Reel Example: DSC1001CE1-123.0000T The example part number above is a 123.0000MHz oscillator in Plastic 3.2x2.5mm package, with 50ppm stability over an operating temperature of -20 to +70oC, shipped in Tape and Reel. Disclaimer: Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel's terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. MICREL, Inc. Phone: +1 (408) 944-0800 Page 8 2180 Fortune Drive, Fax: +1 (408) 474-1000 San Jose, California 95131 Email: hbwhelp@micrel.com USA www.micrel.com MK-Q-B-P-D-050610-01-8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Micrel: DSC1001AC2-010.0000 DSC1001AC2-010.0000T DSC1001AC2-025.0000 DSC1001AE2-027.0000 DSC1001AE2027.0000T DSC1001AI2-018.4320 DSC1001AI2-018.4320T DSC1001AI2-025.0007 DSC1001AI2-025.0007T DSC1001AI2-065.5360 DSC1001AI2-065.5360T DSC1001AI2-080.0000 DSC1001AI2-080.0000T DSC1001AI2083.3330 DSC1001AI2-083.3330T DSC1001AI5-016.3840 DSC1001AI5-016.3840T DSC1001BE1-012.5000 DSC1001BE1-012.5000T DSC1001BE5-044.0000 DSC1001BE5-044.0000T DSC1001BI1-012.5000 DSC1001BI1012.5000T DSC1001BI2-025.0000 DSC1001BI2-056.7500 DSC1001BI2-056.7500T DSC1001BI5-025.0000 DSC1001BL1-012.5000 DSC1001BL1-012.5000T DSC1001CC1-032.0000 DSC1001CC1-032.0000T DSC1001CC2012.5000 DSC1001CC2-012.5000T DSC1001CC2-025.0000 DSC1001CC2-048.0000 DSC1001CC2-048.0000T DSC1001CC2-050.0000 DSC1001CC2-050.0000T DSC1001CE1-004.8000 DSC1001CE1-012.5000 DSC1001CE1012.5000T DSC1001CE1-024.0000 DSC1001CE1-050.0000 DSC1001CE2-026.0000 DSC1001CE2-026.0000T DSC1001CE2-050.0000 DSC1001CE2-050.0000T DSC1001CI1-012.0000 DSC1001CI1-012.5000 DSC1001CI1012.5000T DSC1001CI1-025.0000 DSC1001CI1-133.3333 DSC1001CI2-018.4320T DSC1001CI2-025.0000 DSC1001CI2-025.0008 DSC1001CI2-025.0008T DSC1001CI2-025.0012 DSC1001CI2-025.0012T DSC1001CI2032.7680 DSC1001CI2-033.0000 DSC1001CI2-033.0000T DSC1001CI2-050.0000 DSC1001CI2-062.5000 DSC1001CI2-062.5000T DSC1001CI5-019.2000 DSC1001CI5-037.0879 DSC1001CI5-037.0879T DSC1001CL1012.5000 DSC1001CL1-012.5000T DSC1001CL1-025.0000 DSC1001CL1-025.0000T DSC1001CL1-030.0000 DSC1001CL1-030.0000T DSC1001CL1-150.0000 DSC1001CL1-150.0000T DSC1001DC1-048.0000 DSC1001DC1048.0000T DSC1001DE1-012.0000 DSC1001DE1-012.5000 DSC1001DE1-012.5000T DSC1001DE1-019.2000 DSC1001DE1-019.2000T DSC1001DE2-012.0000T DSC1001DE2-016.0000 DSC1001DE2-016.0000T DSC1001DE2-032.0000 DSC1001DE2-032.0000T DSC1001DE2-060.0000 DSC1001DE2-060.0000T DSC1001DE5016.0000 DSC1001DE5-016.0000T DSC1001DI1-012.0000 DSC1001DI1-012.5000 DSC1001DI1-012.5000T DSC1001DI1-125.0000T DSC1001DI2-001.2000 DSC1001DI2-001.2000T DSC1001DI2-001.8432 DSC1001DI2001.8432T DSC1001DI2-008.0000T