Data Sheet SCA3300-D01 3-axis Industrial Accelerometer and Inclinometer with Digital SPI Interface Features 3-axis high performance accelerometer with 1.5g to 6g user selectable measurement range Extensive self-diagnostics features Excellent bias stability and low noise level Mechanically damped sensing element design for superior vibration robustness SPI digital interface -40C...+125C operating temperature range 3.0V...3.6V supply voltage with low 1mA current consumption RoHS compliant robust DFL plastic package suitable for lead free soldering process and SMD mounting Proven capacitive 3D-MEMS technology Applications SCA3300-D01 is targeted at applications demanding high stability with tough environmental requirements. Typical applications include: Professional Leveling Platform Angle Measurement Tilt Compensation Inertial Measurement Units (IMUs) for highly demanding environments Motion Analysis and Control Navigation Systems Overview The SCA3300-D01 is a high performance accelerometer sensor component. It is three axis accelerometer sensor based on Murata's proven capacitive 3D-MEMS technology. Signal processing is done in mixed signal ASIC with flexible SPI digital interface. Sensor element and ASIC are packaged to 12 pin premolded plastic housing that guarantees reliable operation over product's lifetime. The SCA3300-D01 is designed, manufactured and tested for high stability, reliability and quality requirements. The component has extremely stable output over wide range of temperature and vibration. The component has several advanced self diagnostics features, is suitable for SMD mounting and is compatible with RoHS and ELV directives. Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 1/21 Rev. A1 TABLE OF CONTENTS 1 Introduction.................................................................................................................. 3 2 Specifications ............................................................................................................... 3 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 3 General Product Description ................................................................................... 14 3.1 4 Recommended Start Up Sequence .......................................................................................... 15 Recommended Operation Sequence ...................................................................................... 15 Component Interfacing ............................................................................................ 16 5.1 5.2 5.3 5.4 5.5 5.6 6 Factory Calibration....................................................................................................................... 15 Component Operation, Reset and Power Up ....................................................... 15 4.1 4.2 5 General Specifications .................................................................................................................. 3 Performance Specifications ........................................................................................................ 3 Performance Specification for Temperature Sensor ............................................................ 4 Absolute Maximum Ratings ......................................................................................................... 4 Pin Description................................................................................................................................ 5 Typical Performance Characteristics ........................................................................................ 6 Digital I/O Specification ............................................................................................................... 9 Measurement Axis and Directions ............................................................................................11 Package Characteristics .............................................................................................................. 12 PCB Footprint ................................................................................................................................ 13 General ............................................................................................................................................ 16 Protocol .......................................................................................................................................... 16 SPI Frame ........................................................................................................................................ 17 Example of Acceleration Data Conversion ............................................................................. 18 Example of Temperature Data Conversion ............................................................................ 18 Example of Self-Test Analysis ................................................................................................... 19 Application Information .......................................................................................... 20 6.1 6.2 Application Circuitry and External Component Characteristics ....................................... 20 Assembly Instructions ................................................................................................................. 21 Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 2/21 Rev. A1 1 Introduction This document contains essential technical information about the SCA3300-D01 sensor including specifications, SPI interface descriptions, electrical properties and application information. This document should be used as a reference when designing in SCA3300-D01 component. 2 Specifications 2.1 General Specifications General specifications for SCA3300-D01 component are presented in Table 1. All analog voltages are referenced to the potential at AVSS and all digital voltages are referenced to the potential at DVSS. Table 1. General specifications. Parameter Supply voltage: VDD, DVIO I_VDD 2.2 Condition Min 3.0 Typ 3.3 1.2 Normal mode Max 3.6 Units V mA Performance Specifications Table 2. Accelerometer performance specifications (VDD=3.3V and room temperature unless otherwise specified). Parameter Condition Measurement range Measurement axes XYZ Min Offset (zero acceleration output) Offset error (A X-,Y-axis -40C ... +125C Offset temperature drift (B Z-axis -40C ... +125C 1.5g Mode 4 and Mode 3 3g Mode 1 6g Mode 2 Sensitivity Sensitivity temperature drift Integrated noise (RMS) -40C ... +125C -1g ... +1g range -6g ... +6g range In mode 3 1.5g Noise density In mode 3 1.5g Cross axis sensitivity (D Amplitude response -3dB frequency Power on start-up time per axis Mode 1, Mode 2 and Mode 3 Mode 4 ODR Normal mode Linearity error (C Max 6 Unit g 0 20 1.15 LSB mg 10 0.57 15 0.86 mg mg 5400 2700 1350 0.7 Sensitivity error (A (B Typ -6 LSB/g % 0.3 1 15 1.2 37 -1 % mg mg mgRMS g/ Hz +1 88 10 1 % Hz Hz ms 2000 Hz VALUES ARE 3 SIGMA VARIATION LIMITS FROM TEST POPULATION. VALUES ARE NOT GUARANTEED. A. INCLUDES CALIBRATION ERROR AND DRIFT OVER LIFETIME. B. DEVIATION FROM VALUE AT ROOM TEMPERATURE. C. STRAIGHT LINE THROUGH SPECIFIED MEASUREMENT RANGE END POINTS. D. CROSS AXIS SENSITIVITY IS THE MAXIMUM SENSITIVITY IN THE PLANE PERPENDICULAR TO THE MEASURING DIRECTION. X-AXIS OUTPUT CROSS AXIS SENSITIVITY (CROSS AXIS FOR Y AND Z-AXIS OUTPUTS ARE DEFINED CORRESPONDINGLY): CROSS AXIS FOR Y AXIS = SENSITIVITY Y / SENSITIVITY X CROSS AXIS FOR Z AXIS = SENSITIVITY Z / SENSITIVITY X Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 3/21 Rev. A1 2.3 Performance Specification for Temperature Sensor Table 3. Temperature sensor performance specifications. Parameter Condition Min. Temperature signal range Typ -50 Temperature signal sensitivity Unsigned 16-bit word Temperature signal offset C output Max. +150 18.9 -283 -273 Unit C LSB/C -263 C Temperature is converted to C with following equation: Temperature [C] = -273 + (TEMP / 18.9), where TEMP is temperature sensor output in decimal format. 2.4 Absolute Maximum Ratings Within the maximum ratings (Table 4), no damage to the component shall occur. Parametric values may deviate from specification, yet no functional failure shall occur. Table 4. Absolute maximum ratings. Parameter Remark Min. VDD Max. Unit -0.3 4.3 V DIN/DOUT Maximum voltage at digital input and output pins -0.3 DVIO+0.3 V Topr Operating temperature range -40 125 C Tstg Storage temperature range -40 150 C ESD_HBM ESD according Human Body Model (HBM), Q100-002 ESD_CDM ESD according Charged Device Model (CDM), Q100-011 US Ultrasonic agitation (cleaning, welding, etc) Murata Electronics Oy www.murata.com Supply voltage analog circuitry Typ SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 2000 V 500 750 (corner pins) V Prohibited 4/21 Rev. A1 2.5 Pin Description The pinout for SCA3300-D01 is presented in Figure 1, while the pin descriptions can be found in Table 5. AVSS 1 12 EMC_ GND A_EXTC 2 11 DVSS RESERVED 3 10 D_EXTC VDD 4 9 DVIO CSB 5 8 SCK MISO 6 7 MOSI Figure 1. Pinout for SCA3300-D01. Table 5. SCA3300-D01 pin descriptions. Pin# Name Type Description 1 AVSS GND Analog reference ground, connect externally to AVSS 2 A_EXTC AOUT External capacitor connection for positive reference voltage 3 RESERVED - 4 VDD SUPPLY 5 CSB DIN 6 MISO DOUT 7 MOSI DIN Data In of SPI Interface, 3.3V logic compatible Schmitt-trigger input 8 SCK DIN CLK signal of SPI Interface Factory use only, leave floating or connect to GND Analog Supply voltage Chip Select of SPI Interface, 3.3V logic compatible Schmitt-trigger input Data Out of SPI Interface 9 DVIO SUPPLY 10 D_EXTC AOUT External capacitor connection for digital core 11 DVSS GND Digital Supply Return, connect externally to GND 12 EMC_GND Murata Electronics Oy www.murata.com SPI interface Supply Voltage EMC GND EMC ground pin, connect externally to AVSS SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 5/21 Rev. A1 2.6 Typical Performance Characteristics Figure 2. SCA3300-D01 accelerometer typical offset temperature behavior. Figure 3. SCA3300-D01 accelerometer typical long term stability during 1000h HTOL. T=+125C Vsupply=3.6V Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 6/21 Rev. A1 Figure 4. SCA3300-D01 accelerometer typical sensitivity temperature error in %. Figure 5. Vibration rectification error. Sine sweep 500...5KHz with 4g amplitude and 5kHz...25kHz with 2g amplitude. Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 7/21 Rev. A1 Figure 6. SCA3300-D01 accelerometer typical linearity behavior. Figure 7. SCA3300-D01 accelerometer typical noise density Figure 8. SCA3300-D01 typical allan deviation. Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 8/21 Rev. A1 2.7 Digital I/O Specification 2.7.1 DC Characteristics Table 6. Input terminal: CSB Parameter Pull-up current Input voltage '1' Input voltage '0' 1 2 3 Conditions VIN = 0V DVIO = 3.3 V DVIO = 3.3 V Symbol IPU VIH VIL Min 10 2.5 0 Typ 16.5 Max 50 DVIO 1.1 Unit uA V V Conditions VIN = 0V Symbol IPU Min 10 Typ 16.5 Max 50 Unit uA DVIO = 3.3 V DVIO = 3.3 V VIH VIL 2.5 0 DVIO 1.1 V V Table 7. Input terminal: MOSI, SCK Parameter Pull-down current Input voltage '1' Input voltage '0' 1 2 3 Table 8. Output terminal: MISO 9 Parameter Output high voltage 10 11 Output low voltage Tri-state leakage 12 Maximum Capacitive load Conditions I > -1 mA DVIO = 3.3 V I < 1 mA 0 < VMISO < 3.3 V Symbol VOH VOL ILEAK Min Typ DVIO0.5V TBD Max Unit uA 0.5 V uA 50 pF 2.7.2 SPI AC Characteristics The AC characteristics of SCA3300-D01 SPI interface are defined in Figure 9 and Table 9. Figure 9. Timing diagram of SPI communication. Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 9/21 Rev. A1 Table 9. SPI AC electrical characteristics. Terminals SCK Parameter Description Min Typ Max Unit TCL SCK low time Tper/2 200 ns TCH SCK high time Tper/2 200 ns fSCK = 1/Tper SCK Frequency 0.1 2.5 TLS1 Time from CSB (10%) to SCK (90%) Tper/2 1740 ns TLS2 Time from SCK (10%) to CSB (90%) Tper/2 920 ns TSET Time from changing MOSI (10%, 90%) to SCK (90%). Data setup time Tper/4 200 ns THOL Time from SCK (90%) Tper/4 to changing MOSI (10%, 90%). Data hold time 200 ns TVAL1 Time from CSB (10%) to stable MISO (10%, 90%) 120 ns TLZ Time from CSB (90%) to high impedance state of MISO 110 ns SCK, MISO TVAL2 Time from SCK (10%) to stable MISO (10%, 90%) 110 ns MISO LOAD Capacitive load CSB TLH Time between SPI cycles, CSB at high level (90%) CSB, SCK MOSI, SCK MISO, CSB Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 8 50 10 MHz pF us 10/21 Rev. A1 2.8 Measurement Axis and Directions Figure 10. SCA3300-D01 measurement directions. Table 10. SCA3300-D01 accelerometer measurement directions. x: 0g y: 0g z: +1g x: 0g y: -1g z: 0g Murata Electronics Oy www.murata.com x: +1g y: 0g z: 0g x: -1g y: 0g z: 0g SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes x: 0g y: 0g z: -1g x: 0g y: +1g z: 0g 11/21 Rev. A1 2.9 Package Characteristics 2.9.1 Package Outline Drawing Figure 11. Package outline. The tolerances are according to ISO2768-f (see Table 11). Table 11. Limits for linear measures (ISO2768-f). Tolerance class f (fine) Murata Electronics Oy www.murata.com Limits in mm for nominal size in mm 0.5 to 3 Above 3 to 6 Above 6 to 30 0.05 0.05 0.1 SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 12/21 Rev. A1 2.10 PCB Footprint Figure 12. Recommended PWB pad layout for SCA3300-D01. The tolerances are according to ISO2768-f (see Table 11). Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 13/21 Rev. A1 3 General Product Description The SCA3300-D01 sensor includes acceleration sensing element and Application-Specific Integrated Circuit (ASIC). Figure 13 contains an upper level block diagram of the component. EEPROM Acceleration sensing element AFE ADC Self diagnostics Signal conditioning and filtering SPI Temperature sensor Figure 13. SCA3300-D01 component block diagram. The sensing elements are manufactured using Murata proprietary High Aspect Ratio (HAR) 3DMEMS process, which enables making robust, extremely stable and low noise capacitive sensors. The acceleration sensing element consists of four acceleration sensitive masses. Acceleration causes capacitance change that is converted into a voltage change in the signal conditioning ASIC. Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 14/21 Rev. A1 3.1 Factory Calibration SCA3300-D01 sensors are factory calibrated. No separate calibration is required in the application. Calibration parameters are stored to non-volatile memory during manufacturing. The parameters are read automatically from the internal non-volatile memory during the startup. It should be noted that assembly can cause minor offset/bias errors to the sensor output. If best possible offset/bias accuracy is required, system level offset/bias calibration (zeroing) after assembly is recommended. 4 Component Operation, Reset and Power Up 4.1 Recommended Start Up Sequence Item 1 Procedure Set VDD = 3.0 .. 3.6 V Set DVIO = 3.0 .. 3.6 V Wait 10 ms Function Startup the device 3 Set Measurement mode 4 Wait 5 ms 5 Read ERR_STATUS, ACCX, ACCY, ACCZ, STO 2 4.2 Memory reading Settling of signal path Select operation mode Settling of signal path Read error status and acceleration data and selftest output Note VDD and DVIO don't need to rise at the same time Mode1: 3g full-scale. 88 Hz 1st order low pass filter (default) Mode2: 6g full-scale. 88 Hz 1st order low pass filter Mode3: 1.5g full-scale. 88 Hz 1st order low pass filter. Mode4: 1.5g full-scale. 10 Hz 1st order low pass filter. Recommended Operation Sequence Sensor ODR in normal operation mode is 2000Hz. Registers are updated in every 0.5ms and if all data is not read the full noise performance of sensor is not met. During normal operation during every cycle needed acceleration outputs ACCX, ACCY, ACCZ are read in wanted ODR. Error summary is read if return status (RS) indicates error. For fail safe option self-test output STO is read after reading all corresponding acceleration outputs. If STO is not within 400d then corresponding acceleration readings are not reliable. If STO is not returned within limits in no vibration condition after HW reset, it is possible that component failure has occurred. Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 15/21 Rev. A1 5 Component Interfacing 5.1 General SPI communication transfers data between the SPI master and SCA3300-D01 ASIC. The SCA3300D01 always operates as a slave device in master-slave operation mode. 3-wire SPI connection cannot be used. SPI interface pins: CSB SCK MOSI MISO 5.2 Chip Select (active low) Serial Clock Master Out Slave In Master In Slave Out MCU ASIC MCU ASIC MCU ASIC ASIC MCU Protocol The SPI is a 32-bit 4-wire slave configured bus. Off-frame protocol is used so each transfer consists of two phases. A response to the request is sent within next request frame. The response concurrent to the request contains the data requested by the previous command. The SPI transmission is always started with the falling edge of chip select (CSB) and terminated with the CSB rising edge. The data bits are sampled from MOSI line at the rising edge of the SCK signal and it is propagated on the falling edge (MISO line) of the SCK. This equals to SPI Mode 0 (CPOL = 0 and CPHA = 0). The first bit in a sequence is an MSB. CSB SCK MOSI Request 1 Request 2 Request 3 * Undefined Response 1 Response 2 MISO * The first response after reset is undefined and shall be discarded Figure 14. SPI Protocol Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 16/21 Rev. A1 5.3 SPI Frame SPI operating commands can be found in Table 13. Response frame has data bits and read status determined in Table 12. Figure 15 - SPI Frame Table 12. SPI Frame Specification RS Name D Description Return status(1 Data MISO '00' - Startup in progress '01' - Normal operation, no flags '11' - Error Returned data Return Status (RS) shows error (i.e. '11') when an error flag (or flags) is active in, or if previous MOSI-command was incorrect frame. 5.3.1 Operations Table 13. Operations and their equivalent SPI frames. 1) Operation SPI Frame SPI Frame Hex Read ACCX 0000 0100 0000 0000 0000 0000 1111 0111 040000F7h Read ACCY 0000 1000 0000 0000 0000 0000 1111 1101 080000FDh Read ACCZ 0000 1100 0000 0000 0000 0000 1111 1011 0C0000FBh Read STO(self-test output) 0001 0000 0000 0000 0000 0000 1110 1001 0x100000E9 Read TEMP 0001 0100 0000 0000 0000 0000 1110 1111 140000EFh Read Status Summary 0001 1000 0000 0000 0000 0000 1110 0101 180000E5h SW reset 1011 0100 0000 0000 0010 0000 1001 1000 0xB4002098 Change to mode1 1011 0100 0000 0000 0000 0000 0001 1111 B400001Fh Change to mode2 1011 0100 0000 0000 0000 0001 0000 0010 B4000102h Change to mode3 1011 0100 0000 0000 0000 0010 0010 0101 B4000225h Change to mode4 1011 0100 0000 0000 0000 0011 0011 1000 B4000338h Read WHOAMI 0100 0000 0000 0000 0000 0000 1001 0001 40000091h PRIORITY OF RETURN STATUS STATES FROM HIGHEST TO LOWEST IS: '00' -> '11' -> '01' Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 17/21 Rev. A1 5.3.2 Status Explanation Status summary contain more accurate information of possible error source. SW reset is done with SPI bus. HW reset means that to resolve error there is need to power cycling. If this does not reset the error then possible component error has occurred and system needs to be shutdown and part returned to supplier. Status summary explanations: Status summary bits Bit Name 15:10 reserved 9 digi1 8 digi2 7 clock 6 sat Description Not used Digital block error type 1 Digital block error type 2 ASIC clock error Signal saturated in signal path 5 temp Signal saturated in temperature compensation 4 power Voltage level failure 3 mem Memory error 2 1 digi3 mode_change Digital block error type 3 Operation mode has changed 0 pin_continuity Component internal connection error 5.4 Note/Action SW or HW reset needed SW or HW reset needed SW or HW reset needed Acceleration too high and acceleration reading not usable. Component failure possible External temperature too high or low. Component failure possible External voltages too high or low. Component failure possible Memory check failed. SW or HW reset needed. Possible component failure. SW or HW reset needed If mode change is not requested. SW or HW reset needed. Possible component failure. Example of Acceleration Data Conversion For example, if ACC_X read results: ACC_X = 0500DC02h, the content is converted to acceleration rate as follows: 05h = 000001 01b 01b = return status (RS bits) = no error 00DCh = bin 0000 0000 1101 1100b = ACC_X 00DCh in 2's complement format = 220d Acceleration(Mode1) = 220LSB / sensitivity(mode1) = 220LSB/2700=0.081g=81mg Mode1 sensitivity = 2700 LSB/g Mode2 sensitivity = 1350 LSB/g Mode3 and 4 sensitivity = 5400 LSB/g 5.5 Example of Temperature Data Conversion For example, if TEMP read results: TEMP = 15161E4Eh, the content is converted to temperature as follows: 15h = bin 000111 01b 01 = return status (RS bits) = no error 161Eh = bin 0001 0110 0001 1110 = TEMP FE6Fh in 2's complement format = 5662d Temperature = -273 + ( TEMP / 18.9) = -273 + [298/18.9] = +26.6C See section 2.3 for temperature conversion equation Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 18/21 Rev. A1 5.6 Example of Self-Test Analysis If Self-test data read results: 0500DC02h, the content analyzed as follows: 05h = 000001 01b 01b = return status (RS bits) = no error 00DCh = bin 0000 0000 1101 1100b = self-test reading 00DCh in 2's complement format = 220d If self-test readings are higher than 400d or lower than -400d, acceleration data read same time is not usable. If self-test output is not returned within requested limits there is possible component failure. Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 19/21 Rev. A1 6 Application Information 6.1 Application Circuitry and External Component Characteristics See Figure 16 and Table 14 for specification of the external components. The PCB layout example is shown in Figure 17. Figure 16. Application schematic. Table 14. External component description for SCA3300-D01. Symbol Description C1 Decoupling capacitor between VDD and GND ESR Min. Nom. Max. Unit 70 100 130 100 nF m 70 100 130 100 nF m 70 100 130 100 nF m 70 100 130 100 nF m Recommended component: Murata GCM188R71C104KA37, 0603, 100N, 16V, X7R C2 Decoupling capacitor between A_EXTC and AVSS ESR Recommended component: Murata GCM188R71C104KA37, 0603, 100N, 16V, X7R C3 Decoupling capacitor between D_EXTC and GND ESR Recommended component: Murata GCM188R71C104KA37, 0603, 100N, 16V, X7R C4 Decoupling capacitor between DVIO and GND ESR Recommended component: Murata GCM188R71C104KA37, 0603, 100N, 16V, X7R Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 20/21 Rev. A1 Figure 17. Application PCB layout. General circuit diagram and PCB layout recommendations for SCA3300-D01 (refer to Figure 16 and Figure 17): Connect decoupling SMD capacitors (C1 - C5) right next to respective component pins. Locate ground plate under component. Do not route signals or power supplies under the component on top layer. Ensure good ground connection of DVSS, AVSS and EMC_GND pins 6.2 Assembly Instructions The Moisture Sensitivity Level of the component is Level 3 according to the IPC/JEDEC JSTD020C. The part is delivered in a dry pack. The manufacturing floor time (out of bag) at the customer's end is 168 hours. Usage of PCB coating materials may penetrate component lid and affect component performance. PCB coating is not allowed. Sensor components shall not be exposed to chemicals which are known to react with silicones, such as solvents. Sensor components shall not be exposed to chemicals with high impurity levels, such as Cl-, Na+, NO3-, SO4-, NH4+ in excess of >10 ppm. Flame retardants such as Br or P containing materials shall be avoided in close vicinity of sensor component. Materials with high amount of volatile content should also be avoided. If heat stabilized polymers are used in application, user should check that no iodine, or other halogen, containing additives are used. For additional assembly related details please refer to Technical Note Assembly instructions of Dual Flat Lead Package (DFL). 82201500A_DFL Assembly instructions Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes 21/21 Rev. A1 Document Change Control Authors Approved by Antti Viitanen Iivari Heikkila Department/Role Product Division / Product Manager Product Division / Product Engineer Rev. Date Change Description Author A0 29.9.2016 Preliminary release ASV A1 3.11.2016 New outlook. Updated figures. Low-power mode removed. ASV/IIHE Murata Electronics Oy www.murata.com SCA3300-D01 Doc.Nr. 82 2290 00 Subject to changes Reviewed by ECN 22/21 Rev. A1