RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED ) 0,76 0,030 15,74 0,620 2,54 0,100 1 8 18,67 0,735 11,75 0,463 1 3,05 0,120 11,47 0,452 1,27 0,050 3,30 0,07 0,130 0,003 X2 0,350 7 x 1,27 = (8,89 3,18 0,125 TOP OF PCB LP 12,29 0,484 0,10 0,004 MAX 16,66 0,656 8 3,12 0,123 11,43 0,450 16,35 0,644 18,50 0,25 0,728 0,010 2,50 +0,30 0,00 0,098 +0,012 0,000 8,13 0,320 NOTE 1: WITH PEGS, SMT SIDE SHIELD TABS AND SMT TERMINALS (STP) 2,50 0,098 11,430,13 0,450 0,005 NOTE 2: C - UL APPROVED E145613 AND MEETS FCC REQUIREMENTS NOTE 3: RoHS COMPLIANT IMPROVED CONTACT DESIGN (PRE BEND) 1:1 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. T e chnical spe cif icat io ns Mate ri al s & F i n i sh Stan d ard ap p l i c . Val u e T e st D ata Stan d ard ap p l i c . Val u e Insulation body Standard description PA46 30% Me c h ani c al p ro p e rti e s Contact material Standard description C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N Contact finish, mating zone Thickness of plating 30 in Au over 50 in Ni Mechanical operations IEC 512-5, 9a min. 1.000 Contact finish termination zone Thickness of plating 80 in matte Sn over 50 Ni Effectiveness of connector co upli ng de vice IEC 512-8, 15f 50 N She ll/shi e ld mate ri al Standard de scriptio n C2680 (acc. JIS) Shell/shield plating Thickness of plating 50 in Ni El e c tri c al p ro p e rti e s Cre e p ag e / c l e aran c e d i stan c e s A sse mb l y p ro c e ss a) Contact - contact IEC 807-3 0,52 mm P ackagi ng IEC 807-3 min. 1, 0 mm Se e chart b) Co ntact - she ll So lde r te mpe rature Vo l tag e p ro o f (Di e l e c tri c Wi thstan d Vo l tag e ) 260C at 3-5s Suitable asse mbly pro ce ss re flo w a) Co ntact - co ntact IEC 512-2, 4a mi n. 1. 000 V AC/ DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC A p p ro v al s Current carrying capacity IEC 512-3, 5b 1,5 A @ 25 C UL i nsulatio n bo dy max. 30 mOhm UL 94 V0 Co ntact re sistance IEC 512-2, 2a UL Fi le N o . IEC 512-2, 3a mi n. 500 MOhm E145613 Insulati o n re sistance Ro HS co mpli ant Yes En v i ro n me n tal p ro p e rti e s Ope rati o n te mpe rature 0 - 70 C PACKAGING VERPACKUNG PART NO. IDENT. NR. 133611 203422 TRAY (Standard) (SEE PAGE 2 of 2) TAPE & REEL (SEE PAGE 2 of 2) 120 PIECES PER REEL Tolerances Information: Scale 2:1 All Dimensions in mm [in] Designation All rights reserved. Subject to modification without Only for Information. prior notice. To ensure that this is the latest Drawing will not be updated. version of this drawing, please contact one of the ERNI companies before using. www.ERNI.com A 16.10.2007 Index Date Class MOD JACK - MJLS 8P8C, 1X1, SMT 203499 MJ I(1/2) A3 0,05 Section B-B TAPE AND REEL INFORMATION VERPACKT IN GURTVERPACKUNG 120 CONNECTORS PER REEL R0 , 75 0,20 0,008 Detail "A" B B 329,00 0,3 14,00 44,00 1,732 4,00 0,157 A 0,15 111 2,00 0,079 20,20 0,795 111 1,75 0,069 +0 ,1 0,05 1,5 0 0,40 0,016 0, 0 59 +0 ,1 Section A-A 53,00 203422 TAPE & REEL PACKAGE NOTE 1: 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE 0.2 "A" 5,00 0,197 28,00 1,102 A NOTE 2: CAMBER NOT TO EXCEED 1 mm IN 100 mm NOTE 3: MATERIAL: CLEAR ADVANTEK POLYSTYRENE 12,40 0,488 12,40 0,488 NOTE 4: 15,90 0,626 16,10 0,634 NOTE 5: POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOL 1,35 0,053 TTOM TOP SURFACE OF THE CARRIER MEASURED FROM A PLANE ON THE INSIDE BO OF THE POCKET TO THE 1,35 0,053 133611 TRAY PACKAGE Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1:1 Information: Tolerances Scale 2:1 All Dimensions in mm [in] Designation All rights reserved. Subject to modification without Only for Information. prior notice. To ensure that this is the latest Drawing will not be updated. version of this drawing, please contact one of the ERNI companies before using. www.ERNI.com Class MOD JACK - MJLS 8P8C, 1X1, SMT 203499 MJ I(2/2) A3