CPC2014N 8-Pin SOIC Dual OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance LED Current to operate Rating 60 400 2 2 Description Units VP mA mA Features * Designed for use in security systems complying with EN50130-4 * Small 8-Pin SOIC Package * TTL/CMOS Compatible input * Arc-Free With No Snubbing Circuits * 1500Vrms Input/Output Isolation * No EMI/RFI Generation * Immune to radiated EM fields * SMD Pick & Place, Wave Solderable * Tape & Reel Version Available The CPC2014N is a miniature device with two independent Form-A solid state relays in an 8-Pin SOIC package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The super efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled outputs are controlled by highly efficient GaAlAs infrared LEDs. The CPC2014N uses Clare's state of the art, double-molded vertical construction packaging to produce one of the world's smallest relays. The CPC2014N offers substantial board space savings over the competitor's larger 8-Pin SOIC relay. Approvals * UL Recognized Component: Pending * EN/IEC 60950-1: Pending * CSA Certified Component: Pending Ordering Information Applications * Security * Passive Infrared Detectors (PIR) * Data Signalling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls Part # CPC2014N CPC2014NTR Description 8-Pin SOIC (50/tube) 8-Pin SOIC (2000/reel) Pin Configuration 8 1 + Control Load 7 2 - Control Load 6 3 + Control Load 4 5 - Control Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF Pb RoHS 2002/95/EC DS-CPC2014N-R01 tON e3 www.clare.com 1 CPC2014N Absolute Maximum Ratings (@ 25C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 600 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 5.0 mW / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t <10ms IL=400mA VL=60VP IL ILPK RON ILEAK - - 400 1 2 1 mA AP tON tOFF COUT - - 0.47 0.22 40 1 2 1 - IF IF VF IR 0.1 0.9 - 0.25 0.2 1.2 - 2 1.4 10 IF=5mA, VL=10V 50V; f=1MHz IL=400mA IF=5mA VR=5V A ms pF pF mA mA V A Load current derates linearly from 400mA @ 25oC to 200mA @80oC, and must be derated for both poles operating simultaneously. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended. www.clare.com R01 CPC2014N PERFORMANCE DATA* 25 15 10 5 Typical On-Resistance Distribution (N=50, TA=25C, IL=400mA, IF=1mA) 35 Typical Blocking Voltage Distribution (N=50, TA=25C) 30 20 Device Count (N) 20 Device Count (N) Device Count (N) 25 Typical LED Forward Voltage Drop (N=50, TA=25C, IF=5mA) 15 10 5 25 20 15 10 5 0 0 Device Count (N) 15 10 5 0.16 0.18 0.20 0.22 0.24 LED Current (mA) 0.26 15 10 5 0.18 0.20 0.22 0.24 LED Current (mA) 66.5 20 15 10 5 0.35 0.26 Maximum Load Current vs. Temperature with One Pole Operating (IF=2mA) Typical Turn-Off Time (N=50, TA=25C, IL=100mA, IF=5mA) 64.5 65.0 65.5 66.0 Blocking Voltage (VP) 0 0.16 0.28 0.016 500 0.40 0.45 0.50 0.55 Turn-On (ms) 0.60 0.65 Typical Leakage vs. Temperature Measured Across Pins 5&6 and 7&8 (VL=60V) 0.014 20 15 10 5 400 Leakage (A) Load Current (mA) 25 300 200 0.012 0.010 0.008 0.006 0.004 100 0.002 0 0 0.55 0.65 0.75 0.85 Turn-Off (ms) 0.95 -40 1.05 Typical Blocking Voltage vs. Temperature 72 70 Turn-On (ms) 68 66 64 62 60 58 -40 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 0 -40 100 Typical Turn-On vs. Temperature (IL=80mA) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Turn-Off (ms) Device Count (N) 20 64.0 Typical Turn-On Time (N=50, TA=25C, IL=100mA, IF=5mA) 25 0 0 Blocking Voltage (VP) 63.5 Typical IF for Switch Dropout (N=50, TA=25C, IL=400mA) 25 20 30 0 0.505 0.510 0.515 0.520 0.525 0.530 0.535 On-Resistance () 1.275 Typical IF for Switch Operation (N=50, TA=25C, IL=400mA) 25 Device Count (N) 1.255 1.260 1.265 1.270 LED Forward Voltage (V) Device Count (N) 1.250 IF=5mA IF=10mA -40 -20 0 20 40 60 Temperature (C) 80 100 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -40 -20 0 20 40 60 Temperature (C) 80 100 Typical Turn-Off vs. Temperature (IL=80mA) IF=5mA IF=10mA -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 CPC2014N PERFORMANCE DATA* Typical Turn-On vs. LED Forward Current (IL=80mA) IF=50mA 1.5 Turn-On (ms) IF=20mA 1.4 1.3 1.2 IF=10mA IF=5mA IF=2mA 1.1 1.0 -40 0 20 40 60 Temperature (C) 0.5 0.4 0.3 0.2 0.1 0 0.36 0 LED Forward Current (mA) 10 15 20 25 30 35 40 LED Forward Current (mA) Typical IF for Switch Operation vs. Temperature (IL=200mA) Typical IF for Switch Dropout vs. Temperature (IL=200mA) 5 10 15 20 25 30 35 40 45 50 0.36 5 50 45 IF=5mA IF=10mA 0.7 Steady State 0.6 0.5 0.4 -40 -20 0 20 40 60 80 100 Temperature (C) Typical Load Current vs. Load Voltage with One Pole Operating (IF=2mA) -0.2 -0.1 0.0 0.1 Load Voltage (V) 0.2 0.3 0.28 0.24 0.20 0.32 0.28 0.24 0.20 0.16 -20 0 20 40 60 Temperature (C) 80 100 10s 100s -40 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve (IF=2mA) Load Current (mA) 500 400 300 200 100 0 -100 -200 -300 -400 -500 -0.3 0.32 0.16 -40 0.3 Load Current (mA) 0.7 0.6 0 100 Typical On-Resistance vs. Temperature (IL=200mA) 0.8 On-Resistance () 80 LED Current (mA) 0.9 -20 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 LED Current (mA) LED Forward Voltage (V) 1.6 Typical Turn-Off vs. LED Forward Current (IL=80mA) Turn-Off (ms) Typical LED Forward Voltage Drop vs. Temperature 1100 1000 900 800 700 600 500 400 300 200 100 0 10s 100s 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 CPC2014N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb RoHS 2002/95/EC Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. e3 Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 8-Lead SOIC Narrow Package 9.347 0.203 (0.368 0.008) Recommended PCB Land Pattern 1.016 0.025 (0.040 0.001) 0.203 0.025 (0.008 0.001) 5.60 (0.22) 1.30 (0.051) Pin 1 2.540 TYP (0.100 TYP) 2.184 MAX (0.086 MAX) 6.096 0.102 (0.240 0.004) 3.810 0.051 (0.150 0.002) 2.54 (0.100) 0.55 (0.022) 0.432 0.127 (0.017 0.005) Lead to Package Standoff MIN 0.0254 (0.001) (MAX 0.102 (0.004) 0.838 0.102 (0.033 0.004) Dimensions mm (inches) 0.381 0.051 (0.015 0.002) 330.2 DIA. (13.00 DIA.) 2.0 (0.079) 12.0 (0.472) 4.0 (0.157) 1.50 (0.059) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 7.5 (0.295) 16.0 (0.63) K0=2.7 (0.106) K1=2.3 (0.091) Embossed Carrier 6.8 (0.268) B0=10.3 (0.406) A0=6.5 (0.256) R0.5 (0.020) 3.0 (0.118) 2.0 (0.079) Embossment For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-CPC2014N-R01 (c)Copyright 2009, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/10/09