SPEC NO: DSAA4435 REV NO: V.15 DATE: MAR/27/2013 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203000140
2.0x1.25mm PHOTOTRANSISTOR
Part Number: KP-2012P3C
Features
z2.0mmx1.25mm SMT LED,1.1mm thickness.
zMechanically and spectrally matched to the infrared emitting
LED lamp.
zWater clear lens.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
Made with NPN silicon phototransistor chips.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAA4435 REV NO: V.15 DATE: MAR/27/2013 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203000140
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25° C
Symbol Parameter Min. Typ. Max. Units Test Conditions
VBR CEO Collector-to-Emitter Breakdown Voltage 30 V IC=100uA
Ee=0mW/c ㎡
VBR ECO Emitter-to-Collector Breakdown Voltage 5 V IE=100uA
Ee=0mW/c ㎡
VCE (SAT) Collector-to-Emitter Saturation Voltage 0.8 V IC=2mA
Ee=20mW/c ㎡
I CEO Collector Dark Current 100 nA VCE=10V
Ee=0mW/c ㎡
TR Rise Time (10％ to 90％ ) 15 us
VCE = 5V
IC=1mA
RL=1000Ω
TF Fall Time (90％ to 10％ ) 15 us
I (ON) On State Collector Current 0.2 0.4 mA
VCE = 5V
Ee=1mW/c ㎡
λ=940nm
Parameter Max.Ratings
Collector-to-Emitter Voltage 30V
Emitter-to-Collector Voltage 5V
Power Dissipation at (or below) 25°C Free Air Temperature 100mW
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAA4435 REV NO: V.15 DATE: MAR/27/2013 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203000140
KP-2012P3C
Recommended Soldering Pattern
(Units : mm; Toleranc e: ± 0.1)
Tape Specifications
(Units : mm)
Reel Dimension
Reflow soldering is recommended and the sold ering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the produc t.
SPEC NO: DSAA4435 REV NO: V.15 DATE: MAR/27/2013 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203000140
PACKING & LABEL SPECIFICATIONS KP-2012P3C
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
