
FDS5351 N-Channel PowerTrench® MOSFET
www.fairchildsemi.com
2
©2008 Fairchild Semiconductor Corporation
FDS5351 Rev.C
Electrical Characteristics TJ = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Typ Max Units
Off Characteristics
BVDSS Drain to Source Breakdown Voltage ID = 250µA, VGS = 0V 60 V
∆BVDSS
∆TJ
Breakdown Voltage Temperature
Coefficient ID = 250µA, referenced to 25°C 55 mV/°C
IDSS Zero Gate Voltage Drain Current VDS = 48V, VGS = 0V 1µA
IGSS Gate to Source Leakage Current VGS = ±20V, VDS = 0V ±100 nA
On Characteristics
VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250µA1.0 2.0 3.0 V
∆VGS(th)
∆TJ
Gate to Source Threshold Voltage
Temperature Coefficient ID = 250µA, referenced to 25°C -6.2 mV/°C
rDS(on) Static Drain to Source On Resistance VGS = 10V, ID = 6.1A 26.5 35.0 mΩVGS = 4.5V, ID = 5.5A 32.4 42.0
VGS = 10V, ID = 6.1A, TJ= 125°C 44.5 58.8
gFS Forward Transconductance VDD = 5V, ID = 6.1A 24 S
Dynamic Characteristics
Ciss Input Capacitance VDS = 30V, VGS = 0V,
f = 1MHz
985 1310 pF
Coss Output Capacitance 90 120 pF
Crss Reverse Transfer Capacitance 50 75 pF
RgGate Resistance f = 1MHz 1.7 Ω
Switching Characteristics
td(on) Turn-On Delay Time VDD = 30V, ID = 6.1A,
VGS = 10V, RGEN = 6Ω
8 16 ns
trRise Time 3 10 ns
td(off) Turn-Off Delay Time 21 34 ns
tfFall Time 2 10 ns
QgTotal Gate Charge VGS = 0V to 10V VDD = 30V,
ID = 6.1A
19 27 nC
QgTotal Gate Charge VGS = 0V to 4.5V 913 nC
Qgs Gate to Source Charge 3 nC
Qgd Gate to Drain “Miller” Charge 3.5 nC
Drain-Source Diode Characteristics
VSD Source to Drain Diode Forward Voltage VGS = 0V, IS = 6.1A (Note 2) 0.82 1.3 V
VGS = 0V, IS = 2.1A (Note 2) 0.76 1.2
trr Reverse Recovery Time IF = 6.1A, di/dt = 100A/µs 24 38 ns
Qrr Reverse Recovery Charge 15 27 nC
NOTES:
1. RθJA is determined with th e de vice moun ted on a 1in2 pad 2 oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. RθJC is guaranteed by design whil e RθCA is determined by
the user's board design.
2. Pulse Test: Pulse Width < 300µs, Duty cycle < 2.0%.
3. UIL condition: Starting TJ = 25°C, L = 3mH, IAS = 7A, VDD = 60V, VGS = 10V.
a) 50 °C/W when moun ted on a
1in2 pad of 2 oz copper. b) 125°C/W when mounted on a
minimum pad.
http://store.iiic.cc/