BC857S PNP, Multi-Chip, General-Purpose Amplifier Description This device is designed for general-purpose amplifier applications at collector currents to 200 mA. Sourced from Process 68. E2 B2 C1 C2 SC70-6 Mark: 3C pin #1 E1 E2 C2 B2 B1 C1 E1 B1 NOTE: The pinouts are symmetrical; pin 1 and pin 4 are interchangeable. Units inside the carrier can be of either orientation and will not affect the functionality of the device. Figure 1. Device Package Figure 2. Internal Connections Ordering Information Part Number Top Mark Package Packing Method BC857S 3C SC70 6L Tape and Reel Absolute Maximum Ratings(1),(2) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Symbol Value Unit VCEO Collector-Emitter Voltage -45 V VCES Collector-Base Voltage -50 V VCBO Collector-Base Voltage -50 V VEBO Emitter-Base Voltage -5.0 V Collector Current - Continuous -200 mA -55 to +150 C IC TJ, TSTG Parameter Operating and Storage Junction Temperature Range Notes: 1. These ratings are based on a maximum junction temperature of 150 C. 2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or low-duty cycle operations. (c) 1998 Fairchild Semiconductor Corporation BC857S Rev. 1.3 www.fairchildsemi.com 1 BC857S -- PNP, Multi-Chip, General-Purpose Amplifier August 2015 Values are at TA = 25C unless otherwise noted. Symbol PD RJA Parameter Max. Unit Total Device Dissipation 300 mW Derate Above 25C 2.4 mW/C Thermal Resistance, Junction to Ambient 415 C/W Note: 3. PCB size: FR-4 76 x 114 x 1.57 mm3 (3.0 inch x 4.5 inch x 0.062 inch) with minimum land pattern size. Electrical Characteristics Values are at TA = 25C unless otherwise noted. Symbol Parameter V(BR)CEO Collector-Emitter Breakdown Voltage Conditions Min. Typ. Max. Unit IC = -10 mA, IB = 0 -45 V Collector-Base Breakdown Voltage IC = -10 A, IE = 0 -50 V V(BR)CBO Collector-Base Breakdown Voltage IC = -10 A, IE = 0 -50 V IE = -10 A, IC = 0 -5 V V(BR)CES V(BR)EBO Emitter-Base Breakdown Voltage ICBO Collector Cut-Off Current hFE DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage VBE(on) Base-Emitter On Voltage fT Cob NF VCB = -30 V -15 nA VCB = -30 V, TA = 150 C -4 A IC = -2.0 mA, VCE = -5.0 V 630 IC = -10 mA, IB = -0.5 mA -0.30 IC = -100 mA, IB = -5.0 mA -0.65 IC = -2.0 mA, VCE = -5.0 V -0.60 -0.75 IC = -10 mA, VCE = -5.0 V -0.82 V V Current Gain-Bandwidth Product IC = -10 mA, VCE = -5.0 V, f = 100 MHz 200 MHz Output Capacitance VCB = -10 V, f = 1.0 MHz 3.5 pF Noise Figure IC = -0.2 mA, VCE = -5.0 V, RS = 2.0 k, f = 1.0 kHz, BW = 200 Hz 2.5 dB (c) 1998 Fairchild Semiconductor Corporation BC857S Rev. 1.3 125 www.fairchildsemi.com 2 BC857S -- PNP, Multi-Chip, General-Purpose Amplifier Thermal Characteristics(3) VCESAT - COLLECTOR EMITTE R VOLTAGE (V) h FE - TYPICAL PULSED CURRENT GAIN 500 V CE = 5V 0.25 125 C 400 300 - 40 C 0.1 1 10 100 I C - COLLECTOR CURRENT (mA) 0 0.1 V BEON - BAS E EMITTER ON VOLTAGE (V) V BESAT - BASE EM ITTE R VOLTAGE (V) = 10 1 125 C 1 10 100 I C - COLLECTOR CURRE NT (mA) 300 - 40C 25 C 125 C 0.6 25 C - 40 C 1 0.8 - 40 C 0.6 125 C 0.4 0.4 0 0.1 V CE = 5V 0.2 0.2 1 10 100 I C - COLLECTOR CURRE NT (mA) 300 0 0.1 1 10 I C - COLLECTOR CURRE NT (mA) 100 200 Figure 6. Base-Emitter On Voltage vs. Collector Current BVCER - BREAKDOWN VOLTAGE (V) Figure 5. Base-Emitter Saturation Voltage vs. Collector Current I CBO - COLLE CTOR CURRENT (nA) 25 C 0.1 Figure 4. Collector-Emitter Saturation Voltage vs. Collector Current Figure 3. Typical Pulsed Current Gain vs. Collector Current 0.8 0.2 0.05 0 0.01 1.2 = 10 0.15 25 C 200 100 0.3 100 95 V CB = 50V 10 90 85 1 80 0.1 75 0.01 25 50 75 100 T A - AMBIE NT TEMP ERATURE ( C) 70 0.1 125 10 100 1000 RESISTANCE (k ) Figure 8. Collector-Emitter Breakdown Voltage with Resistance between Emitter-Base Figure 7. Collector Cut-Off Current vs. Ambient Temperature (c) 1998 Fairchild Semiconductor Corporation BC857S Rev. 1.3 1 www.fairchildsemi.com 3 BC857S -- PNP, Multi-Chip, General-Purpose Amplifier Typical Performance Characteristics V CE - COLLECTOR-EMITTER VOLTAGE (V) 100 f = 1.0 MHz 4 CAPACITANCE (pF) Ta = 25C 3 Ic = 2 100 uA 300 mA 50 mA 10 Cib Cob 1 0.1 1 0 100 300 700 10 100 V CE - COLLECTOR VOLTAGE (V) 2000 4000 I B - BASE CURRENT (uA) Figure 10. Input and Output Capacitance vs. Reverse Voltage f T - GAIN BANDWIDTH PRODUCT (MHz) Figure 9. Collector Saturation Region 300 40 270 Vce = 5V 30 TIME (nS) 210 20 180 IB1 = IB2 = Ic / 10 V cc = 10 V 150 120 90 10 tf 60 30 0 10 0 1 10 20 50 100 150 I C - COLLECTOR CURRENT (mA) tr td 20 30 50 100 200 I C - COLLECTOR CURRENT (mA) 300 Figure 12. Switching Times vs. Collector Current Figure 11. Gain Bandwidth Product vs. Collector Current PD - POWE R DIS SIPATION (W) ts 240 500 400 SC70 -6 300 200 100 0 0 25 50 75 100 TE MPE RATURE (C) 125 150 Figure 13. Power Dissipation vs. Ambient Temperature (c) 1998 Fairchild Semiconductor Corporation BC857S Rev. 1.3 www.fairchildsemi.com 4 BC857S -- PNP, Multi-Chip, General-Purpose Amplifier Typical Performance Characteristics (Continued) BC857S -- PNP, Multi-Chip, General-Purpose Amplifier Physical Dimensions SYMM C L 2.000.20 0.65 A 0.50 MIN 6 4 B PIN ONE 1.250.10 1 1.90 3 0.30 0.15 (0.25) 0.40 MIN 0.10 0.65 A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.100.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE BURRS OR MOLD FLASH. D) DRAWING FILENAME: MKT-MAA06AREV6 30 0 0.46 0.26 SCALE: 60X Figure 14. 6-LEAD, SC70, EIAJ SC-88, 1.25 MM WIDE (c) 1998 Fairchild Semiconductor Corporation BC857S Rev. 1.3 www.fairchildsemi.com 5 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT OPTOLOGIC(R) AccuPower AttitudeEngineTM Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FastvCore FETBench FPS OPTOPLANAR(R) (R) Power Supply WebDesigner PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R)* TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM TM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application - including life critical medical equipment - where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. Customer's use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild's product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild's Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I76 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor: BC857S