AZ6961 10 AMP SUBMINIATURE POWER RELAY FEATURES CONTACTS Arrangement Resistive load: Life Expectancy Mechanical Electrical Minimum operations 10 million 3 X 105 at 8 A 240 VAC res. Operate Time (typical) 7 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) nt in Ratings SPDT (1 Form C) SPST (1 Form A) GENERAL DATA ue High sensitivity, 120 mW pickup Dielectric strength 5000 Vrms Isolation spacing greater than 8 mm 10 Amp switching capability Class B insulation standard, Class F version available Epoxy sealed version for automatic wave soldering and cleaning available * UL, CUR file E44211 * VDE 131637UG d * * * * * * co Max. switched power: 240 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 240* VDC or 440 VAC UL, CUR Rating: 10 A at 250 VAC resistive [1] 8 A at 30 VDC/250 VAC [1] 8 A at 30 VDC/250 VAC, 100k cycles [2] B300 Pilot Duty [1] R300 Pilot Duty [1] 1/4 HP at 125 VAC [1] 1/2 HP at 250 VAC [1] VDE Rating: 8 A at 250 VAC *Note: if switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Resistance COIL < 100 milliohms initially D Power Silver cadmium oxide (AgCdO) [1] Silver tin oxide (AgSnO2) [2] Gold plating available is Material At Pickup Voltage (typical) 120 mW Max. Continuous Dissipation 1.2 W at 20C (68F) ambient Temperature Rise 20C (36F) at nominal coil voltage Temperature Max. 130C (266F) Class B Max. 155C (311F) Class F Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation 1000 megohms min. at 20C, 500 VDC, Resistance 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40C (-40F) to 100C (212F) -40C (-40F) to 130C (266F) Class B -40C (-40F) to 155C (311F) Class F Vibration Break Contact: 5g at 10...500 Hz Make Contact: 20g at 10...500 Hz Shock 10 g Enclosure P.B.T. polyester, UL94 V-0 Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) Max. Immersion Time 30 seconds Weight 8 grams NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 4. Class F version not VDE approved 2/17/05W AZ6961 RELAY ORDERING DATA COIL SPECIFICATIONS Max. Continuous VDC 5 6 11.6 14.0 12 27.2 24 53.1 48 107.3 60 122.4 Coil Resistance ORDER NUMBER* Must Operate VDC 1 Form A (SPST-NO) 1 Form C (SPDT) 3.5 4.2 AZ6961-1A-5D AZ6961-1A-6D AZ6961-1C-5D AZ6961-1C-6D 617 10% 8.4 AZ6961-1A-12D AZ6961-1C-12D 2350 10% 16.8 AZ6961-1A-24D AZ6961-1C-24D 9600 15% 33.6 AZ6961-1A-48D AZ6961-1C-48D 12500 15% 42.0 AZ6961-1A-60D AZ6961-1C-60D 113 10% 164 10% d Nominal Coil VDC ue *Add "E" to "-1A" or "-1C" for AgSnO2 contacts. Add suffix "E" for sealed version. Add suffix "A" for gold plated contacts. Add suffix "F" for Class F version. MECHANICAL DATA FORM C VERSION 1.132 Max [28.75] 5xO.051 [O1.3] .408 Max [10.35] .494 Max [12.55] .012 [0.3] 3x.031 [0.8] .142 [3.6] is D 1.132 Max [28.75] .126 [3.2] 4xO.051 [O1.3] 2x.020 [0.5] .126 [3.2] .116 [2.95] .744 [18.9] .298 [7.56] .050 [1.3] FORM A .198 [5.04] VIEWED TOWARD TERMINALS CIRCUIT DIAGRAM .408 Max [10.35] .494 Max [12.55] .012 [0.3] .050 [1.3] FORM C 3x.016 [0.4] FORM A VERSION .062 [1.57] .870 [22.1] .298 [7.56] co 2x.020 [0.5] nt in PC BOARD LAYOUT 1 1 4 FORM C .142 [3.6] 2 4 FORM A 3 5 2 5 VIEWED TOWARD TERMINALS 2x.031 [0.8] 2x.016 [0.4] Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 2/17/05W This specification provides an overview of the most significant part features. Any individual applications and operating conditions are not taken into consideration. It is recommended to test the product under application conditions. Responsibility for the application remains with the customer. Proper operation and service life cannot be guaranteed if the part is operated outside the specified limits.