CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A)
Ratings Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 240* VDC or 440 VAC
UL, CUR Rating: 10 A at 250 VAC resistive [1]
8 A at 30 VDC/250 VAC [1]
8 A at 30 VDC/250 VAC,
100k cycles [2]
B300 Pilot Duty [1]
R300 Pilot Duty [1]
1/4 HP at 125 VAC [1]
1/2 HP at 250 VAC [1]
VDE Rating: 8 A at 250 VAC
*Note: if switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material Silver cadmium oxide (AgCdO) [1]
Silver tin oxide (AgSnO2) [2]
Gold plating available
Resistance < 100 milliohms initially
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 10 million
Electrical 3 X 105 at 8 A 240 VAC res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation 1000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 100°C (212°F)
Storage -40°C (-40°F) to 130°C (266°F) Class B
-40°C (-40°F) to 155°C (311°F) Class F
Vibration Break Contact: 5g at 10...500 Hz
Make Contact: 20g at 10...500 Hz
Shock 10 g
Enclosure P.B.T. polyester, UL94 V-0
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 8 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Class F version not VDE approved
COIL
Power
At Pickup Voltage 120 mW
(typical)
Max. Continuous 1.2 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 20°C (36°F) at nominal coil voltage
Temperature Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
AZ6961
2/17/05W
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
•High sensitivity, 120 mW pickup
•Dielectric strength 5000 Vrms
•Isolation spacing greater than 8 mm
•10 Amp switching capability
•Class B insulation standard, Class F version available
•Epoxy sealed version for automatic wave soldering and
cleaning available
•UL, CUR file E44211
•VDE 131637ÜG
Discontinued
RELAY ORDERING DATA
COIL SPECIFICATIONS ORDER NUMBER*
Nominal Coil Max. Continuous Coil Resistance Must Operate 1 Form A 1 Form C
VDC VDC VDC (SPST-NO) (SPDT)
5 11.6 113 ± 10% 3.5 AZ6961–1A–5D AZ6961–1C–5D
6 14.0 164 ± 10% 4.2 AZ6961–1A–6D AZ6961–1C–6D
12 27.2 617 ± 10% 8.4 AZ6961–1A–12D AZ6961–1C–12D
24 53.1 2350 ± 10% 16.8 AZ6961–1A–24D AZ6961–1C–24D
48 107.3 9600 ± 15% 33.6 AZ6961–1A–48D AZ6961–1C–48D
60 122.4 12500 ± 15% 42.0 AZ6961–1A–60D AZ6961–1C–60D
*Add “E” to “-1A” or “-1C” for AgSnO2contacts. Add suffix “E” for sealed version. Add suffix “A” for gold plated contacts. Add suffix “F” for
Class F version.
AZ6961
2/17/05W
.408 Max
[10.35]
.408 Max
[10.35]
2x.020
[0.5]
FORM A VERSION
1.132 Max
[28.75]
2x.031
[0.8]
2x.016
[0.4]
.494 Max
[12.55]
.012
[0.3] .142
[3.6]
FORM C VERSION
1.132 Max
[28.75]
2x.020
[0.5]
.494 Max
[12.55]
.012
[0.3]
3x.016
[0.4]
3x.031
[0.8]
.142
[3.6]
CIRCUIT DIAGRAM
2
1
2
1
5
4
35
4
.870
[22.1]
FORM C
PC BOARD LAYOUT
FORM A
.744
[18.9]
.298
[7.56]
4xØ.051
[Ø1.3]
.298
[7.56]
5xØ.051
[Ø1.3]
.126
[3.2]
.062
[1.57]
.126
[3.2]
.050
[1.3]
.116
[2.95]
.198
[5.04]
.050
[1.3]
VIEWED TOWARD TERMINALS
VIEWED TOWARD TERMINALS
FORM A
FORM C
MECHANICAL DATA
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
Discontinued
This specification provides an overview of the most significant part features. Any individual applications and operating conditions are not taken into consideration. It is recommended to test the product
under application conditions. Responsibility for the application remains with the customer. Proper operation and service life cannot be guaranteed if the part is operated outside the specified limits.
