µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
D3-Terminal Regulators
DOutput Current Up To 100 mA
DNo External Components
DInternal Thermal-Overload Protection
DInternal Short-Circuit Current Limiting
description/ordering information
This series of fixed-voltage integrated-circuit
voltage regulators is designed for a wide range of
applications. These applications include on-card
regulation for elimination of noise and distribution
problems associated with single-point regulation.
In addition, they can be used with power-pass
elements to make high-current voltage regulators.
One of these regulators can deliver up to 100 mA
of output current. The internal limiting and
thermal-shutdown features of these regulators
essentially make them immune to overload. When
used as a replacement for a Zener diode-resistor
combination, an effective improvement in output
impedance can be obtained, together with lower
bias current.
The µA78L00C and µA78L00AC series are
characterized for operation over the virtual
junction temperature range of 0°C to 125°C. The
µA78L05AI is characterized for operation over the
virtual junction temperature range of −40°C to
125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2004, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
D PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
OUTPUT
COMMON
COMMON
NC
INPUT
COMMON
COMMON
NC
PK PACKAGE
(TOP VIEW)
NC − No internal connection
INPUT
COMMON
OUTPUT
LP PACKAGE
(TO-92, TO-226AA)
(TOP VIEW)
INPUT
COMMON
OUTPUT
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
description/ordering information (continued)
ORDERING INFORMATION
TJ
VO(NOM)
(V)
OUTPUT
VOLTAGE
TOLERANCE
PACKAGEORDERABLE
PART NUMBER
TOP-SIDE
MARKING
26V
5%
SOIC (D) Tube of 75 µA78L02ACD 78L02A
2.6 V 5% TO-226/TO-92 (LP) Bulk of 1000 µA78L02ACLP 78L02AC
SOIC (D)
Tube of 75 µA78L05ACD
78L05A
SOIC (D) Reel of 2500 µA78L05ACDR 78L05A
5%
SOT-89 (PK) Reel of 1000 µA78L05ACPK F5
5%
TO 92 (LP)
Bulk of 1000 µA78L05ACLP
TO-92 (LP)
TO
-
226AA (LP)
Pack of 2000 µA78L05ACLPM 78L05AC
5 V
TO
-
226AA
(LP)
Reel of 2000 µA78L05ACLPR
78L05AC
5
V
SOIC (D)
Tube of 75 µA78L05CD
78L05C
SOIC (D) Reel of 2500 µA78L05CDR 78L05C
10% SOT-89 (PK) Tube of µA78L05CPK B5
10%
TO-92 (LP) Bulk of 1000 µA78L05CLP
78L05C
TO 92
(LP)
TO-226AA (LP) Reel of 2000 µA78L05CLPR 78L05C
SOT-89 (PK) Reel of 1000 µA78L06ACPK F6
6.2 V 5% TO-92 (LP) Bulk of 1000 µA78L06ACLP
78L06AC
6.2
V
5%
TO 92
(LP)
TO-226AA (LP) Reel of 2000 µA78L06ACLPR 78L06AC
SOIC (D)
Tube of 75 µA78L08ACD 78L08A
SOIC (D) Reel of 2500 µA78L08ACDR 78L08A
5% SOT-89 (PK) Reel of 1000 µA78L08ACPK F8
0°C to 125°C8 V
5%
TO-92 (LP) Bulk of 1000 µA78L08ACLP
78L08AC
TO 92
(LP)
TO-226AA (LP) Reel of 2000 µA78L08ACLPR 78L08AC
10%
SOIC (D)
Tube of 75 µA78L08CD
78L08C
10% SOIC (D) Reel of 2500 µA78L08CDR 78L08C
SOIC (D)
Tube of 75 µA78L09ACD
78L09A
SOIC (D) Reel of 2500 µA78L09ACDR 78L09A
9 V 5% SOT-89 (PK) Reel of 1000 µA78L09ACPK F9
9
V
5%
TO-92 (LP) Bulk of 1000 µA78L09ACLP
78L09AC
TO 92
(LP)
TO-226AA (LP) Reel of 2000 µA78L09ACLPR 78L09AC
SOIC (D)
Tube of 75 µA78L10ACD
78L10A
SOIC (D) Reel of 2500 µA78L10ACDR 78L10A
10 V 5% SOT-89 (PK) Reel of 1000 µA78L10ACPK FA
10
V
5%
TO-92 (LP) Bulk of 1000 µA78L10ACLP
78L10AC
TO 92
(LP)
TO-226AA (LP) Reel of 2000 µA78L10ACLPR 78L10AC
SOIC (D)
Tube of 75 µA78L12ACD
78L12A
SOIC (D) Reel of 2500 µA78L12ACDR 78L12A
12 V
5%
SOT-89 (PK) Reel of 1000 µA78L12ACPK FC
12 V 5%
TO 92 (LP)
Bulk of 1000 µA78L12ACLP
TO-92 (LP)
TO
-
226AA (LP)
Pack of 2000 µA78L12ACLPM 78L12AC
TO
-
226AA
(LP)
Reel of 2000 µA78L12ACLPR
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
description/ordering information (continued)
ORDERING INFORMATION (continued)
TJ
VO(NOM)
(V)
OUTPUT
VOLTAGE
TOLERANCE
PACKAGEORDERABLE
PART NUMBER
TOP-SIDE
MARKING
SOIC (D)
Tube of 75 µA78L15ACD
78L15A
SOIC (D) Reel of 2500 µA78L15ACDR 78L15A
0°C to 125°C15 V 5% SOT-89 (PK) Reel of 1000 µA78L15ACPK FF
0 C
to
125 C
15
V
5%
TO-92 (LP) Bulk of 1000 µA78L15ACLP
78L15AC
TO 92
(LP)
TO-226AA (LP) Reel of 2000 µA78L15ACLPR 78L15AC
SOIC (D)
Tube of 75 µA78L05AID
78L15AI
SOIC (D) Reel of 2500 µA78L05AIDR 78L15AI
−40°C to 125°C5 V 5% SOT-89 (PK) Reel of 1000 µA78L05AIPK J5
TO-92 (LP) Bulk of 1000 µA78L05AILP
78L05AI
TO 92
(LP)
TO-226AA (LP) Reel of 2000 µA78L05AILPR 78L05AI
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
schematic
20 k
1 kto 14 k
INPUT
OUTPUT
COMMON
NOTE A: Resistor values shown are nominal.
1.4 k
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
4POST OFFICE BOX 655303 DALLAS, TEXAS 75265
absolute maximum ratings over virtual junction temperature range (unless otherwise noted)
Input voltage, VI:µA78L02AC, µA78L05C−µA78L09C, µA78L10AC 30 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
µA78L12C, µA78L12AC, µA78L15C, µA78L15AC 35 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Virtual junction temperature, TJ 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg −65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
package thermal data (see Note 1)
PACKAGE BOARD θJC θJA
SOIC (D) High K, JESD 51-7 39°C/W 97°C/W
TO-92/TO-226AA (LP) High K, JESD 51-7 55°C/W 140°C/W
SOT-89 (PK) High K, JESD 51-7 9°C/W 52°C/W
NOTE 1: Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Due to variations in
individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power
levels slightly above or below the rated dissipation.
recommended operating conditions
MIN MAX UNIT
µA78L02AC 4.75 20
µA78L05C, µA78L05AC 7 20
µA78L06C, µA78L06AC 8.5 20
V
Input voltage
µA78L08C, µA78L08AC 10.5 23
V
VIInput voltage µA78L09C, µA78L09AC 11.5 24 V
µA78L10AC 12.5 25
µA78L12C, µA78L12AC 14.5 27
µA78L15C, µA78L15AC 17.5 30
IOOutput current 100 mA
T
Operating virtual junction temperature range
µA78LxxC and µA78LxxAC series 0 125
°C
TJOperating virtual junction temperature range µA78L05AI −40 125 °C
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified virtual junction temperature, VI = 9 V, IO = 40 mA (unless
otherwise noted)
TEST CONDITIONS
T
µA78L02AC
UNIT
PARAMETER TEST CONDITIONS TJ
MIN TYP MAX UNIT
V475Vt 20V
I1At40A
25°C2.5 2.6 2.7
Output voltage VI = 4.75 V to 20 V, IO = 1 mA to 40 mA 0°C to 125°C2.45 2.75 V
IO = 1 mA to 70 mA 0°C to 125°C2.45 2.75
V
VI = 4.75 V to 20 V
25°C
20 100
mV
Input voltage regulation VI = 5 V to 20 V 25°C16 75 mV
Ripple rejection VI = 6 V to 20 V, f = 120 Hz 25°C 43 51 dB
IO = 1 mA to 100 mA
25°C
12 50
mV
Output voltage regulation IO = 1 mA to 40 mA 25°C6 25 mV
Output noise voltage f = 10 Hz to 100 kHz 25°C 30 µV
Dropout voltage 25°C 1.7 V
25°C3.6 6
mA
Bias current 125°C5.5 mA
VI = 5 V to 20 V
0°Cto125°C
2.5
mA
Bias current change IO = 1 mA to 40 mA 0°C to 125°C0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
electrical characteristics at specified virtual junction temperature, VI = 10 V, IO = 40 mA (unless
otherwise noted)
PARAMETER TEST CONDITIONS T
J
µA78L05C µA78L05AC
µA78L05AI UNIT
PARAMETER
TEST
CONDITIONS
TJ
MIN TYP MAX MIN TYP MAX
UNIT
V7Vt 20V
I1At40A
25°C 4.6 5 5.4 4.8 5 5.2
Output voltage VI = 7 V to 20 V, IO = 1 mA to 40 mA Full range 4.5 5.5 4.75 5.25 V
Output
voltage
IO = 1 mA to 70 mA Full range 4.5 5.5 4.75 5.25
V
Input VI = 7 V to 20 V
25°C
32 200 32 150
mV
Input
voltage regulation VI = 8 V to 20 V 25°C26 150 26 100 mV
Ripple rejection VI = 8 V to 18 V, f = 120 Hz 25°C 40 49 41 49 dB
Output IO = 1 mA to 100 mA
25°C
15 60 15 60
mV
Output
voltage regulation IO = 1 mA to 40 mA 25°C8 30 8 30 mV
Output
noise voltage f = 10 Hz to 100 kHz 25°C 42 42 µV
Dropout voltage 25°C 1.7 1.7 V
Bias current
25°C 3.8 6 3.8 6
mA
Bias current 125°C 5.5 5.5 mA
Bias VI = 8 V to 20 V
Full range
1.5 1.5
mA
Bias
current change IO = 1 mA to 40 mA Full range 0.2 0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Full range for the µA78L05AC is TJ = 0°C to 125°C,
and full range for the µA78L05AI is TJ = −40°C to 125°C.
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
6POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified virtual junction temperature, VI = 12 V, IO = 40 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
T
µA78L06C µA78L06AC
UNIT
PARAMETER TEST CONDITIONS TJ
MIN TYP MAX MIN TYP MAX UNIT
V85Vt 20V
I1At40A
25°C5.7 6.2 6.7 5.95 6.2 6.45
Output voltage VI = 8.5 V to 20 V, IO = 1 mA to 40 mA 0°C to 125°C5.6 6.8 5.9 6.5 V
Output
voltage
IO = 1 mA to 70 mA 0°C to 125°C5.6 6.8 5.9 6.5
V
Input VI = 8.5 V to 20 V
25°C
35 200 35 175
mV
Input
voltage regulation VI = 9 V to 20 V 25°C29 150 29 125 mV
Ripple rejection VI = 10 V to 20 V, f = 120 Hz 25°C 39 48 40 48 dB
Output IO = 1 mA to 100 mA
25°C
16 80 16 80
mV
Output
voltage regulation IO = 1 mA to 40 mA 25°C9 40 9 40 mV
Output
noise voltage f = 10 Hz to 100 kHz 25°C 46 46 µV
Dropout voltage 25°C 1.7 1.7 V
Bias current
25°C3.9 6 3.9 6
mA
Bias current 125°C5.5 5.5 mA
Bias VI = 9 V to 20 V
0°C to 125°C
1.5 1.5
mA
Bias
current change IO = 1 mA to 40 mA 0°C to 125°C0.2 0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 40 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
T
µA78L08C µA78L08AC
UNIT
PARAMETER TEST CONDITIONS TJ
MIN TYP MAX MIN TYP MAX UNIT
V105Vt 23V
I1At40A
25°C7.36 8 8.64 7.7 8 8.3
Output voltage VI = 10.5 V to 23 V, IO = 1 mA to 40 mA 0°C to 125°C7.2 8.8 7.6 8.4 V
Output
voltage
IO = 1 mA to 70 mA 0°C to 125°C7.2 8.8 7.6 8.4
V
Input volta
g
eVI = 10.5 V to 23 V
25°C
42 200 42 175
mV
Input
voltage
regulation VI = 11 V to 23 V 25°C36 150 36 125 mV
Ripple rejection VI = 13 V to 23 V, f = 120 Hz 25°C 36 46 37 46 dB
Output volta
g
eIO = 1 mA to 100 mA
25°C
18 80 18 80
mV
Output
voltage
regulation IO = 1 mA to 40 mA 25°C10 40 10 40 mV
Output
noise voltage f = 10 Hz to 100 kHz 25°C 54 54 µV
Dropout voltage 25°C 1.7 1.7 V
Bias current
25°C4 6 4 6
mA
Bias current 125°C5.5 5.5 mA
Bias VI = 11 V to 23 V
0°C to 125°C
1.5 1.5
mA
Bias
current change IO = 1 mA to 40 mA 0°C to 125°C0.2 0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
7
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified virtual junction temperature, VI = 16 V, IO = 40 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
T
µA78L09C µA78L09AC
UNIT
PARAMETER TEST CONDITIONS TJ
MIN TYP MAX MIN TYP MAX UNIT
V12Vt 24V
I1At40A
25°C8.3 9 9.7 8.6 9 9.4
Output voltage VI = 12 V to 24 V, IO = 1 mA to 40 mA 0°C to 125°C8.1 9.9 8.55 9.45 V
Output
voltage
IO = 1 mA to 70 mA 0°C to 125°C8.1 9.9 8.55 9.45
V
Input VI = 12 V to 24 V
25°C
45 225 45 175
mV
Input
voltage regulation VI = 13 V to 24 V 25°C40 175 40 125 mV
Ripple rejection VI = 15 V to 25 V, f = 120 Hz 25°C 36 45 38 45 dB
Output IO = 1 mA to 100 mA
25°C
19 90 19 90
mV
Output
voltage regulation IO = 1 mA to 40 mA 25°C11 40 11 40 mV
Output
noise voltage f = 10 Hz to 100 kHz 25°C 58 58 µV
Dropout voltage 25°C 1.7 1.7 V
Bias current
25°C4.1 6 4.1 6
mA
Bias current 125°C5.5 5.5 mA
Bias VI = 13 V to 24 V
0°C to 125°C
1.5 1.5
mA
Bias
current change IO = 1 mA to 40 mA 0°C to 125°C0.2 0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 40 mA (unless
otherwise noted)
TEST CONDITIONS
T
µA78L10AC
UNIT
PARAMETER TEST CONDITIONS TJ
MIN TYP MAX UNIT
V13Vt 25V
I1At40A
25°C9.6 10 10.4
Output voltage VI = 13 V to 25 V, IO = 1 mA to 40 mA 0°C to 125°C9.5 10.5 V
IO = 1 mA to 70 mA 0°C to 125°C9.5 10.5
V
VI = 13 V to 25 V
25°C
51 175
mV
Input voltage regulation VI = 14 V to 25 V 25°C42 125 mV
Ripple rejection VI = 15 V to 25 V, f = 120 Hz 25°C 37 44 dB
IO = 1 mA to 100 mA
25°C
20 90
mV
Output voltage regulation IO = 1 mA to 40 mA 25°C11 40 mV
Output noise voltage f = 10 Hz to 100 kHz 25°C 62 µV
Dropout voltage 25°C 1.7 V
25°C4.2 6
mA
Bias current 125°C5.5 mA
VI = 14 V to 25 V
0°Cto125°C
1.5
mA
Bias current change IO = 1 mA to 40 mA 0°C to 125°C0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
8POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified virtual junction temperature, VI = 19 V, IO = 40 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
T
µA78L12C µA78L12AC
UNIT
PARAMETER TEST CONDITIONS TJ
MIN TYP MAX MIN TYP MAX UNIT
V14Vt 27V
I1At40A
25°C11.1 12 12.9 11.5 12 12.5
Output voltage VI = 14 V to 27 V, IO = 1 mA to 40 mA 0°C to 125°C10.8 13.2 11.4 12.6 V
Output
voltage
IO = 1 mA to 70 mA 0°C to 125°C10.8 13.2 11.4 12.6
V
Input VI = 14.5 V to 27 V
25°C
55 250 55 250
mV
Input
voltage regulation VI = 16 V to 27 V 25°C49 200 49 200 mV
Ripple rejection VI = 15 V to 25 V, f = 120 Hz 25°C 36 42 37 42 dB
Output IO = 1 mA to 100 mA
25°C
22 100 22 100
mV
Output
voltage regulation IO = 1 mA to 40 mA 25°C13 50 13 50 mV
Output
noise voltage f = 10 Hz to 100 kHz 25°C 70 70 µV
Dropout voltage 25°C 1.7 1.7 V
Bias current
25°C4.3 6.5 4.3 6.5
mA
Bias current 125°C6 6 mA
Bias VI = 16 V to 27 V
0°C to 125°C
1.5 1.5
mA
Bias
current change IO = 1 mA to 40 mA 0°C to 125°C0.2 0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
electrical characteristics at specified virtual junction temperature, VI = 23 V, IO = 40 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
T
µA78L15C µA78L15AC
UNIT
PARAMETER TEST CONDITIONS TJ
MIN TYP MAX MIN TYP MAX UNIT
V175Vt 30V
I1At40A
25°C13.8 15 16.2 14.4 15 15.6
Output
voltage
VI = 17.5 V to 30 V, IO = 1 mA to 40 mA 0°C to 125°C13.5 16.5 14.25 15.75 V
vo
lt
age
IO = 1 mA to 70 mA 0°C to 125°C13.5 16.5 14.25 15.75
V
Input
voltage
VI = 17.5 V to 30 V
25°C
65 300 65 300
mV
voltage
regulation VI = 20 V to 30 V 25°C58 250 58 250 mV
Ripple
rejection VI = 18.5 V to 28.5 V, f = 120 Hz 25°C 33 39 34 39 dB
Output
voltage
IO = 1 mA to 100 mA
25°C
25 150 25 150
mV
voltage
regulation IO = 1 mA to 40 mA
25°C15 75 15 75 mV
Output
noise voltage f = 10 Hz to 100 kHz 25°C 82 82 µV
Dropout
voltage 25°C 1.7 1.7 V
Bias current
25°C4.6 6.5 4.6 6.5
mA
Bias current 125°C6 6 mA
Bias VI = 10 V to 30 V
0°C to 125°C
1.5 1.5
mA
Bias
current change IO = 1 mA to 40 mA 0°C to 125°C0.2 0.1 mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are
measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
9
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
APPLICATION INFORMATION
VO
VI
0.1 µF0.33 µF
µA78Lxx
Figure 1. Fixed-Output Regulator
OUTIN G
−VO
COM
+
VIIL
µA78Lxx
Figure 2. Positive Regulator in Negative Configuration (VI Must Float)
R1
0.33 µF
Input Output
µA78Lxx
0.1 µF
IO
R2
Figure 3. Adjustable-Output Regulator
VO(Reg)
R1
Input
IO
IO = (VO/R1) + IO Bias Current
0.33 µF
µA78Lxx
Output
Figure 4. Current Regulator
µA78L00 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004
10 POST OFFICE BOX 655303 DALLAS, TEXAS 75265
APPLICATION INFORMATION
µA78L15
0.1 µF1N4001
0.1 µF1N4001
0.33 µF
0.33 µF
1N4001
1N4001
VO = 15 V
VO = −15 V
20-V Input
−20-V Input µA79L15
Figure 5. Regulated Dual Supply
operation with a load common to a voltage of opposite polarity
In many cases, a regulator powers a load that is not connected to ground, but instead, is connected to a voltage
source of opposite polarity (e.g., operational amplifiers, level-shifting circuits, etc.). In these cases, a clamp
diode should be connected to the regulator output as shown in Figure 6. This protects the regulator from output
polarity reversals during startup and short-circuit operation.
µA78Lxx VO
VI
−VO
1N4001
or
Equivalent
Figure 6. Output Polarity-Reversal-Protection Circuit
reverse-bias protection
Occasionally, the input voltage to the regulator can collapse faster than the output voltage. This can occur, for
example, when the input supply is crowbarred during an output overvoltage condition. If the output voltage is
greater than approximately 7 V, the emitter-base junction of the series-pass element (internal or external) could
break down and be damaged. To prevent this, a diode shunt can be employed as shown in Figure 7.
µA78Lxx VO
VI
Figure 7. Reverse-Bias-Protection Circuit
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UA78L02ACD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L02ACDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L02ACDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L02ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L02ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L05ACD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05ACDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05ACDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05ACDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05ACLPM ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05ACLPME3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L05ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L05ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UA78L05ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L05AID ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L05AIDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L05AIDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L05AIDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05AIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05AILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L05AILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L05AILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05AILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05AIPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L05AIPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L05AQD OBSOLETE SOIC D 8 TBD Call TI Call TI Samples Not Available
UA78L05AQDR OBSOLETE SOIC D 8 TBD Call TI Call TI Samples Not Available
UA78L05CD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05CDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05CDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L05CDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UA78L05CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L05CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L05CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L05CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L05CLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05CLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L05CPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L05QLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI Samples Not Available
UA78L05QLPR OBSOLETE TO-92 LP 3 TBD Call TI Call TI Samples Not Available
UA78L06ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L06ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L06ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L06ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L06ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L06ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L08ACD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L08ACDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L08ACDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L08ACDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L08ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 4
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UA78L08ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
UA78L08ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L08ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L08ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L08ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L08ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L08ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L08AILP OBSOLETE TO-92 LP 3 TBD Call TI Call TI Samples Not Available
UA78L08AQDR OBSOLETE SOIC D 8 TBD Call TI Call TI Samples Not Available
UA78L08CDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L08CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L08CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L08CLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI Replaced by UA78L08ACLP
UA78L08CPK OBSOLETE SOT-89 PK 3 TBD Call TI Call TI Replaced by UA78L08ACPK
UA78L09ACD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L09ACDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L09ACDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L09ACDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L09ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L09ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 5
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UA78L09ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L09ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L09ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L09ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L09ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L09ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L10ACD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L10ACDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L10ACDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L10ACDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L10ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
UA78L10ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
UA78L10ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L10ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L10ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L10ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L10ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L10ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L12ACD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 6
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UA78L12ACDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L12ACDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L12ACDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L12ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L12ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
UA78L12ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L12ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L12ACLPM ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L12ACLPME3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L12ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L12ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Request Free Samples
UA78L12ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L12ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L12AQDR OBSOLETE SOIC D 8 TBD Call TI Call TI Samples Not Available
UA78L12AQLPR OBSOLETE TO-92 LP 3 TBD Call TI Call TI Samples Not Available
UA78L15ACD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L15ACDE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L15ACDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L15ACDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L15ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 7
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UA78L15ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
UA78L15ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L15ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type Contact TI Distributor
or Sales Office
UA78L15ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L15ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type Purchase Samples
UA78L15ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
UA78L15ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor
or Sales Office
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 7-Jun-2010
Addendum-Page 8
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
UA78L05ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L05ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
UA78L05AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L05AIPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
UA78L05CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L06ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
UA78L08ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L08ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
UA78L08CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L09ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L09ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
UA78L10ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L10ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
UA78L12ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L12ACDRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L12ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
UA78L15ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UA78L15ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3
PACKAGE MATERIALS INFORMATION
www.ti.com 18-Jun-2011
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
UA78L05ACDR SOIC D 8 2500 340.5 338.1 20.6
UA78L05ACPK SOT-89 PK 3 1000 340.0 340.0 38.0
UA78L05AIDR SOIC D 8 2500 340.5 338.1 20.6
UA78L05AIPK SOT-89 PK 3 1000 340.0 340.0 38.0
UA78L05CDR SOIC D 8 2500 340.5 338.1 20.6
UA78L06ACPK SOT-89 PK 3 1000 340.0 340.0 38.0
UA78L08ACDR SOIC D 8 2500 340.5 338.1 20.6
UA78L08ACPK SOT-89 PK 3 1000 340.0 340.0 38.0
UA78L08CDR SOIC D 8 2500 340.5 338.1 20.6
UA78L09ACDR SOIC D 8 2500 340.5 338.1 20.6
UA78L09ACPK SOT-89 PK 3 1000 340.0 340.0 38.0
UA78L10ACDR SOIC D 8 2500 340.5 338.1 20.6
UA78L10ACPK SOT-89 PK 3 1000 340.0 340.0 38.0
UA78L12ACDR SOIC D 8 2500 340.5 338.1 20.6
UA78L12ACDRG4 SOIC D 8 2500 340.5 338.1 20.6
UA78L12ACPK SOT-89 PK 3 1000 340.0 340.0 38.0
UA78L15ACDR SOIC D 8 2500 340.5 338.1 20.6
UA78L15ACPK SOT-89 PK 3 1000 340.0 340.0 38.0
PACKAGE MATERIALS INFORMATION
www.ti.com 18-Jun-2011
Pack Materials-Page 2
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE
4040001-2/C 10/01
STRAIGHT LEAD OPTION
0.016 (0,41)
0.014 (0,35)
0.157 (4,00) MAX
FORMED LEAD OPTION
0.104 (2,65)
0.210 (5,34)
0.170 (4,32)
0.050 (1,27)
0.016 (0,41)
0.022 (0,56)
0.500 (12,70) MIN
Seating
Plane
0.175 (4,44)
0.205 (5,21) 0.165 (4,19)
0.125 (3,17)
DIA
D
C
0.105 (2,67)
0.095 (2,41)
0.135 (3,43) MIN
0.080 (2,03)
0.055 (1,40)
0.045 (1,14)
1
0.105 (2,67)
23
0.080 (2,03)
0.105 (2,67)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead dimensions are not controlled within this area
D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92)
E. Shipping Method:
Straight lead option available in bulk pack only.
Formed lead option available in tape & reel or ammo pack.
MECHANICAL DATA
MSOT002A OCTOBER 1994 REVISED NOVEMBER 2001
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE
4040001-3/C 10/01
0.094 (2,40)
0.114 (2,90)
0.460 (11,70)
0.539 (13,70)
TAPE & REEL
0.335 (8,50)
0.384 (9,75)
0.020 (0,50) MIN
0.217 (5,50)
0.748 (19,00) 0.748 (19,00)
0.689 (17,50)
0.098 (2,50)
0.433 (11,00)
0.335 (8,50)
0.610 (15,50)
0.650 (16,50)
1.260 (32,00)
0.905 (23,00)
0.234 (5,95)
0.266 (6,75)
0.512 (13,00)
0.488 (12,40)
0.114 (2,90)
0.094 (2,40) 0.146 (3,70)
0.169 (4,30) DIA
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Tape and Reel information for the Format Lead Option package.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated