DETAIL SPECIFICATION SHEET
CONNECTOR, RECEPTACLE, ELECTRICAL, BOX MOUNTING,
SOLDER TYPE, HERMETIC SEAL, SERIES II
This specification is approved for use by all Depart ments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-DTL-38999.
FIGURE 1. Receptacle, class Y.
AMSC N/A FSC 5935
MS27476G
13 April 2012
SUPERSEDING
MS27476F
12 July 2002
INCH-POUND
Reactivated after 24 May 2004 and m ay be used
for new and existing designs and acquisitions.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
MS27476G
2
Shell
size
LP
max
LS
max
Q
max
dia
R
BSC
S
max
T
+.010
-.005
V
dia
+.001
-.005
8
.453
.562
1.078
.297
.828
.120
.562
10
1.266
.3595
.954
.672
12
1.391
.406
1.047
.781
14
1.516
.453
1.141
.906
16
1.641
.4845
1.234
1.031
18
1.766
.531
1.328
1.156
20
1.891
.578
1.453
1.250
22
2.016
.625
1.578
1.375
24
.484
.594
2.204
.6875
1.703
.147
1.500
FIGURE 1. Receptacle, class Y – Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
MS27476G
3
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.005
0.13
.317
8.05
.754
19.15
1.328
33.73
.007
0.18
.344
8.74
.781
19.84
1.355
34.42
.008
0.20
.3595
9.13
.828
21.03
1.375
34.93
.010
0.25
.403
10.24
.879
22.33
1.391
35.33
.011
0.28
.406
10.31
.906
23.01
1.453
36.91
.012
0.30
.438
11.13
.954
24.23
1.500
38.10
.015
0.38
.453
11.51
.980
24.89
1.516
38.51
.028
0.71
.484
12.29
1.031
26.19
1.578
40.08
.053
1.34
.4845
12.31
1.047
26.59
1.641
41.68
.058
1.47
.515
13.08
1.078
27.38
1.703
43.26
.078
1.98
.531
13.49
1.105
28.07
1.766
44.86
.116
2.95
.562
14.27
1.141
28.98
1.891
48.03
.120
3.05
.578
14.68
1.156
29.36
2.016
51.21
.139
3.53
.594
15.09
1.230
31.24
2.204
55.98
.147
3.73
.625
15.88
1.234
31.34
.223
5.66
.629
15.98
1.250
31.75
.238
6.05
.672
17.07
1.266
32.16
.297
1.54
.6875
17.46
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are giv en for i nformat ion only .
3. For main keyway and keyway positions, see MIL-DTL-38999.
4. The gauge features for GG shall be . 004 (0.10 mm) smal ler than M MC size at basic locat ion.
FIGURE 1. Receptacle, class Y – Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
MS27476G
4
REQUIREMENTS:
Dimensions and configuration: See figure 1. I nterface dim ensions shall conform t o MI L-DTL-38999.
This receptacle mates with MS27473, M S 27480, MS27484 and MS27500.
Insert arrangements: See MIL-STD-1560.
Part or Identifyi ng Number (PI N) example:
MS27476 Y 24 D 61 P A
MS number
Class
Shell size
Finish
Insert arrangement
Contact style
Polarizing positions
(No letter is required for normal)
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue, due to t he extent of the changes.
Referenced documents. In addition to MIL-DTL-38999, this document references the following:
MIL-STD-1560
MS27473
MS27480
MS27484
MS27500
CONCLUDING MATERIAL
Custodians: Preparing activity :
Army – CR DLA – CC
Navy – AS
Air Force - 85 (Project: 5935-2012-036)
DLA – CC
Review activities:
Army – MI
Navy – EC, MC, OS
Air Force – 19, 99
NOTE: The activit i es li st ed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should veri fy the currency of the inf orm ation
above using the ASSIST Online database at https://assist.daps.dla.mil.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
