Data brief
For further information contact your local STMicroelectronics sales office.
December 2010 Doc ID 18297 Rev 1 1/4
4
STEVAL-MKI018V1
Adapter board for the LIS244AL
Features
■Complete LIS244AL pinout in standard DIL 24
socket
■Fully compatible with all other available
adapter boards
■RoHS compliant
Description
The STEVAL-MKI018V1 demonstration board is
an adapter board designed to facilitate the
evaluation of the LIS244AL 2-axis analog output
linear accelerometer. The board offers an
effective solution for fast system prototyping and
device evaluation directly within the user’s own
application.
The STEVAL-MKI018V1 can be plugged into a
standard DIL 24 socket. The adapter provides the
complete LIS244AL pinout and comes ready-to-
use with the required decoupling capacitors on
the Vdd power supply line.
The pinout of the adapter is fully compatible with
all other available adapter boards, making it
possible to easily switch from one sensor to
another during device evaluation, without the
need for board redesign.
This data brief provides information on the
STEVAL-MKI018V1 adapter only. For details
regarding LIS244AL specifications, please refer to
the device datasheet.
STEVAL-MKI018V1
www.st.com
Obsolete Product(s) - Obsolete Product(s)
Circuit schematic STEVAL-MKI018V1
2/4 Doc ID 18297 Rev 1
1 Circuit schematic
Figure 1. STEVAL-MKI018V1 demonstration board schematic and connection diagram
(EA D ER
*0
(EA D ER
*0
U&
#
N &
#
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
.#
6$ $
.#
6O UT 8
.#
6O UT 9
.#
6O UT :
'. $
'. $
'. $
.#
'. $
34
.#
2ES
,)3 ! ,
5
0
0
0
0
0
0
0
0
0
0
0
2
2
0
!-6
Obsolete Product(s) - Obsolete Product(s)
STEVAL-MKI018V1 Revision history
Doc ID 18297 Rev 1 3/4
2 Revision history
Table 1. Document revision history
Date Revision Changes
01-Dec-2010 1 Initial release.
Obsolete Product(s) - Obsolete Product(s)
STEVAL-MKI018V1
4/4 Doc ID 18297 Rev 1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Obsolete Product(s) - Obsolete Product(s)
