I-5
Noise
Filter
NAH series
Ultra high-attenuation type of common mode noise from 10kHz to 1MHz
NAH -10 -472 -O
Ordering information
1Model Name
2Rated Current
3Line to ground capacitor code:See table 1.1.
table1.1 Line to ground capacitor code
Code Leakage Current
(Input 125/250V 60Hz)
Line to ground
capacitor
(nominal value)
000 5 A/ 10 A max Not Provided
101 12.5 A/ 25 A max 100pF
221 25 A/ 50 A max 220pF
331 37.5 A/ 75 A max 330pF
471 50 A/ 100 A max 470pF
681 75.5 A/ 150 A max 680pF
102 0.13 mA/ 0.25mA max 1000pF
222 0.25 mA/ 0.5 mA max 2200pF
332 0.38 mA/ 0.75mA max 3300pF
472 0.5 mA/ 1.0 mA max 4700pF
*1 When the line to ground capacitor code is
different, the attenuation characteristic is
different.
4Options
D :DIN rail installation type
*
The dimensions change when the option is set.
Refer to External view.
1 2 3 4
Features of NAH series
Circuit Diagram Derating Curve
LINE
Case
: Mounting Plate
1
24
3
CY
CY
CY : Line to ground capacitor
LOAD
Ultra high-attenuation type of common mode noise from 10kHz to 1MHz
- Single Phase 250 VAC - Quick and easy push-down terminal
Just connect the wires, push down and tighten
the screws with a screwdriver
9050 60 70 80
20
0
-40 40-30 -20
100
80
60
40
55
Ambient Temperature [C]
Load Factor [%]
Specifications
No. Items NAH-06-472 NAH-10-472 NAH-16-472 NAH-20-472 NAH-30-472
1 Rated Voltage[V] AC 1f 250 / DC250
2 Rated Current[A] 6 10162030
3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity
4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 100MW minute at room temperature and humidity
5 Leakage current 125/250V 60Hz 0.5mA/1.0mA max
6 Voltage drop 1.0V max
7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve)
8 Operating temperature -40 to +85C (Refer to Derating Curve)
9 Operating humidity 20 to 95%RH (Non condensing)
10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing)
11 Vibration 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis
12 Impact 196.1m/s2 (20G), 11ms Once each X, Y and Z axis
13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN133200 VDE0565 Teil3-1, ENEC (At only AC input)
14 Case size (without projection) /Mass 53X41X92 mm (WXHXD) /300g max (Option : -D refer to external view)
DIN rail installation type is optionThe terminal cover is retracted inside the unit
I-6
Noise
Filter
NAC,NAM,NAP,NAH series
Mounting Plate
Terminal cover
2-Protection Earth
6-M4
2-f4.8
Name Plate
¶ Tolerance : ±1
¶ Mass : 300g or less
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0
¶ Case : PBT
¶ Dimensions in mm
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
Output
Terminal
Input
Terminal
Output
Terminal
Mounting Hole
Input
Terminal
82 ±0.5
77
15
45 ±0.5
(2)
41
53
92
Terminal cover
¶ Closed the terminal cover
12
8
27
(2.5)
This product is shipped in the following condition, because it is equipped with push-down terminals.
1The terminal cover is retracted inside the unit.
2The screws for connecting the terminals are held in the up right position.
¡Note when installing the noise
fi lter on a DIN rail.
When the noise fi lter is grounded through the
DIN rail, the proper noise attenuation may not be
achieved.
Be sure to connect the protection earth (PE) of
the noise fi lter body to the earth.
6-M4
Name Plate
Output
Terminal
Output
Terminal
7
(9)
(11)92
53
41 (2)
12
15
77
¶ Tolerance : ±1
¶ Mass : 300g or less
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0
¶ Case : PBT
¶ Dimensions in mm
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
(2.5) 8
27
2-Protection Earth
Mounting Plate
Terminal cover
DIN rail
Input
Terminal
Input
Terminal
Terminal cover
¶ Closed the terminal cover
Standard Type
DIN rail installation Type
Name Plate
DIN rail
External view
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cosel:
NAH-30-472 NAH-30-472-D NAH-30-681 NAH-30-681-D NAH-30-331 NAH-30-331-D NAH-30-332 NAH-30-332-
D NAH-30-471 NAH-30-471-D NAH-30-102 NAH-30-102-D NAH-30-221 NAH-30-221-D NAH-30-222 NAH-30-
222-D NAH-20-472 NAH-20-472-D NAH-20-681 NAH-20-681-D NAH-30-101 NAH-30-101-D NAH-20-331 NAH-
20-331-D NAH-20-332 NAH-20-332-D NAH-20-471 NAH-20-471-D NAH-20-102 NAH-20-102-D NAH-20-221
NAH-20-221-D NAH-20-222 NAH-20-222-D NAH-16-472 NAH-16-472-D NAH-16-681 NAH-16-681-D NAH-20-101
NAH-20-101-D NAH-16-331 NAH-16-331-D NAH-16-332 NAH-16-332-D NAH-16-471 NAH-16-471-D NAH-16-
102 NAH-16-102-D NAH-16-221 NAH-16-221-D NAH-16-222 NAH-16-222-D NAH-10-472 NAH-10-472-D NAH-
10-681 NAH-10-681-D NAH-16-101 NAH-16-101-D NAH-10-331 NAH-10-331-D NAH-10-332 NAH-10-332-D
NAH-10-471 NAH-10-471-D NAH-10-102 NAH-10-102-D NAH-10-221 NAH-10-221-D NAH-10-222 NAH-10-222-D
NAH-06-472 NAH-06-472-D NAH-06-681 NAH-06-681-D NAH-10-101 NAH-10-101-D NAH-06-331 NAH-06-331-
D NAH-06-332 NAH-06-332-D NAH-06-471 NAH-06-471-D NAH-06-102 NAH-06-102-D NAH-06-221 NAH-06-
221-D NAH-06-222 NAH-06-222-D NAH-20-000 NAH-20-000-D NAH-30-000 NAH-30-000-D NAH-06-101 NAH-
06-101-D NAH-06-000 NAH-06-000-D NAH-10-000 NAH-10-000-D NAH-16-000 NAH-16-000-D
