P17E14.pdf 04.8.24 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. 1 Characteristics and Types of CERALOCK(R) !Part Numbering (Ex.) CS T CR 4M00 G 5 3 q w e r t y u -R0 i o qProduct ID wFrequency/No capacitance built-in A : No Capacitance Built-in, T : Built-in Capacitance eStructure/Size CC/CR/CE : Cap Chip Type, CW : Monolithic Chip Type rNominal Center Frequency tType G : Thickness Shear Vibration, V : Thickness Longitudinal Vibration, X : Thickness Longitudinal Vibration (3rd overtone) yFrequency Tolerance 1 : 0.1%, 2 : 0.2%, 3 : 0.3%, 5 : 0.5%, Z : Others uLoad Capacitance Value (In case of CSACW, value is for external capacitance of standard circuit) 1 : 5pF or 6pF, 2 : 10pF, 3 : 15pF, 5 : 33pF or 39pF, 6 : 47pF iIndividual Specification With standard products, "i individual Specification" is omitted, and "o Package Specification Code" is carried up. oPackaging -B0 : Bulk, -R0 : Plastic Taping 180mm Reel Package 8 Frequency (MHz) Dimensions Standard Land Pattern (in mm) 2. 0 Part Number 2.5 1.0 1 0.5 X 20.01-70.00 0.5 2.00.2 CSACW 0.8 0.3 1 The MHz band Chip CERALOCK(R) has a wide frequency range and small footprint to meet further down sizing and high-density mounting requirements. The table shows the dimensions and two terminals standard land patterns of the CERALOCK(R) CSACW series. The second table shows the dimensions and three terminals standard land patterns of CSTCC/CSTCR/ CSTCE/CSTCW series chip resonator (built-in load capacitance type). And the carrier tape dimensions of CSTCR series are shown on the next page. !Dimensions and Standard Land Pattern of Chip CERALOCK(R) (CSACW Series) 0.8 0.3 MHz Band Chip CERALOCK(R) (CSACW/CSTCC/ CSTCR/CSTCE/CSTCW Series) 1 Thickness varies with frequency. 2.0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. P17E14.pdf 04.8.24 1 Characteristics and Types of CERALOCK(R) !Dimensions and Standard Land Pattern of Chip CERALOCK(R) (CSTCC/CSTCR/CSTCE/CSTCW Series) !Dimensions of Carrier Tape for Chip CERALOCK(R) Dimensions Standard Land Pattern (in mm) 4.00.1 W0.1 o1.5 Y0 2.00.05 0 3. 2.5 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 2.5 3 max. 12.00.2 5.50.05 4.70.1 W0.1 o1.5Y0 2.20.1 (1.85 max.) 4.00.1 0.30.05 (9.5) 1.2 1.2 1.4 1.2 1.2 2.00-3.99 3.8~4.4 G (3) (2) (1) 1.6 1 CSTCC 1 7.2 1.250.05 Frequency (MHz) 1.750.1 CSTCR Series Part Number 1.2 2. 0 4.5 Direction of Feed (in mm) 0.8 0.7 0.8 0.7 0.8 G*2 4.00-7.99 2.6 1.6 CSTCR 0.4 1.5 3 0.4 3.2 0.8 1. 0.4 1.5 0.4 0.8 0.4 0.8 G*2 0.4 8.00-12.50 1.90 ~ 2.10 CSTCE 1.2 3 3.2 1.0 1. 1.2 0.3 0.65 0.3 0.65 0.3 V*2 12.51-20.00 1.6 CSTCE 0.95 0.95 2. 0 2.5 1.0 1 X*2 20.01-70.00 0.8 0.3 2.000.2 CSTCW 0.8 0.3 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1 Thickness varies with frequency 2 Conformal coating or washing of the components is not acceptable because they are not hermetically sealed. 9