8
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. P17E14.pdf 04.8.24
1
1Characteristics and Types of CERALOCK®
MHz Band Chip CERALOCK®(CSACW/CSTCC/
CSTCR/CSTCE/CSTCW Series)
The MHz band Chip CERALOCK®has a wide frequency
range and small footprint to meet further down sizing
and high-density mounting requirements.
The table shows the dimensions and two terminals
standard land patterns of the CERALOCK®CSACW
series.
The second table shows the dimensions and three
terminals standard land patterns of CSTCC/CSTCR/
CSTCE/CSTCW series chip resonator (built-in load
capacitance type). And the carrier tape dimensions of
CSTCR series are shown on the next page.
!Part Numbering
!Dimensions and Standard Land Pattern of Chip
CERALOCK®(CSACW Series)
Part Number Frequency (MHz) Dimensions
Standard Land Pattern (in mm)
20.01–70.00
∗1
2.5
2.0
1.0
0.5 0.5
2.0
0.80.8
2.0±0.2
0.30.3
CSACW X
qProduct ID
wFrequency/No capacitance built-in
A : No Capacitance Built-in, T : Built-in Capacitance
eStructure/Size
CC/CR/CE : Cap Chip Type, CW : Monolithic Chip Type
rNominal Center Frequency
tType
G : Thickness Shear Vibration,
V : Thickness Longitudinal Vibration,
X : Thickness Longitudinal Vibration (3rd overtone)
yFrequency Tolerance
1 : ±0.1%, 2 : ±0.2%, 3 : ±0.3%, 5 : ±0.5%, Z : Others
uLoad Capacitance Value
(In case of CSACW, value is for external capacitance of
standard circuit)
1 : 5pF or 6pF, 2 : 10pF, 3 : 15pF, 5 : 33pF or 39pF,
6 : 47pF
iIndividual Specification
With standard products, "iindividual Specification" is
omitted, and "oPackage Specification Code" is carried up.
oPackaging
–B0 : Bulk,
–R0 : Plastic Taping φ180mm Reel Package
∗1 Thickness varies with frequency.
(Ex.) CS
q
T
w
CR
e
4M00
r
G
t
5
y
3
u i
-R0
o
9
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. P17E14.pdf 04.8.24
1
!Dimensions and Standard Land Pattern of Chip
CERALOCK®(CSTCC/CSTCR/CSTCE/CSTCW Series)
Part Number Frequency (MHz)
2.00–3.99
Dimensions
Standard Land Pattern (in mm)
3.8~4.4
1.2 1.2 1.2
2.5
2.5
1.4 1.2
1.6
7.2
3.0
∗1
2.6
1.6
0.8
0.4
1.5 1.5
0.4 0.4
0.8 0.8
0.70.7
1.2
4.5
2.0
CSTCC G
4.00–7.99
CSTCR G*2
CSTCE G*2
CSTCE V*2
8.00–12.50
12.51–20.00
20.01–70.00
0.4
1.90 ~ 2.10
0.4 0.40.80.8
1.2 1.2
0.8
3.2
1.3
0.3 0.30.65 0.30.65
0.95 0.95
1.6
1.0
3.2
1.3
∗1
1.0
2.5
2.0
0.5 0.50.50.5
1.0 1.0
0.80.8
2.00±0.2
0.30.3
0.5
CSTCW X*2
∗1 Thickness varies with frequency
∗2 Conformal coating or washing of the components is not acceptable
because they are not hermetically sealed.
(in mm)
4.0±0.1 2.0±0.05
(9.5)
4.0±0.1
(3) (2) (1)
ø1.5W0.1
Y0
ø1.5W0.1
Y0
12.0±0.2
5.5±0.05 1.75±0.1
4.7±0.1
0.3±0.05
1.25±0.05
(1.85 max.)
2.2±0.1
Direction of Feed
3˚ max.
10˚ Cover Film
The cover film peel strength force 0.1 to 0.7N
The cover film peel speed 300mm/min.
!Dimensions of Carrier Tape for Chip CERALOCK®
CSTCR Series
1
Characteristics and Types of CERALOCK®
