6Altech Corp.® ● 35 Royal Road Flemington NJ 08822-6000 ● Phone (908) 806-9400 ● Fax (908) 806-9490 ● www.altechcorp.com
Ordering Information
Slow Blow - Operating Class gL/gG
(VDE 0636 / IEC 269)
Cable, Equipment, and Line Protection,
up to 500V AC
(660V and 750V available)
ND-E 16
Current/ Color
Voltage Cat. No. CodeStd. Pk.
2/500V AC 2D16SB Pink 25
4/500V AC 4D16SB Brown 25
6/500V AC 6D16SB Green 25
10/500V AC 10D16SB Red 25
16/500V AC 16D16SB Gray 25
20/500V AC 20D16SB Blue 25
25/500V AC 25D16SB Yellow 25
30/500V AC 30D16SB* Silver 25
35/500V AC 35D16SB* Black 25
2/500V AC 2D16FB Pink 25
4/500V AC 4D16FB Brown 25
6/500V AC 6D16FB Green 25
10/500V AC 10D16FB Red 25
16/500V AC 16D16FB Gray 25
20/500V AC 20D16FB Blue 25
25/500V AC 25D16FB Yellow 25
30/500V AC 30D16FB* Silver 25
35/500V AC 35D16FB* Black 25
2/500V AC 2D16SC Pink 25
4/500V AC 4D16SC Brown 25
6/500V AC 6D16SC Green 25
10/500V AC 10D16SC Red 25
16/500V AC 16D16SC Gray 25
20/500V AC 20D16SC Blue 25
25/500V AC 25D16SC Yellow 25
30/500V AC 30D16SC Black 25
D16C 1
Not Available
Not Available
D16B 1
D16B3 1
D16BC 1
D16BC3 1
Fast Blow
(CEE-16) - old standard for
Equipment Protection, up to 500V AC
(750V available)
Semiconductor Protection - Operating
Class gR
(VDE 0636 / IEC 269)
Semiconductor Protection,
up to 500V AC, 440V DC
Screw Cap (pgs 10-11)**
Adapter Screw (pgs 10-11)**
(Install only with Adapter Screw Tool)
Adapter Screw Tool (pgs 10-11)**
(for inserting or removing all Adapter Screws)
Fuse Base, Single Pole (pgs 10-11)**
Fuse Base, Three Pole (pgs 10-11)**
Fuse Base Cover, Single Pole (pgs 10-11)**
Fuse Base Cover, Three Pole (pgs 10-11)**
DIAZED (BOTTLE)
Diazed Fuses, commonly called "Bottle"
Fuses, are available in five sizes, ND to
35 Amps, DII to 35 Amps, DIII to 100
Amps, DIV to 100 Amps and DV to 200
Amps. Fuse accessories are sized to
match. Each size fuse body has a
different diameter to fit only into the
appropriate Screw Cap and Fuse Base.
(See illustration pg 10.)
Also, the fuse tips have different
diameters, depending on their current
rating. The diameter of the tip matches
the diameter of the hole in the Adapter
Screw to insure that no fuse with a
higher rating than intended for the circuit
can be installed. This prevents damage
to the circuit or equipment the fuse
protects. Additionally, fuses and Adapter
Screws are color coded to avoid
mismatching; for example: 10 Amp
Diazed fuses have red pop-out
indicators on their head, matching the
red ring of the 10 Amp Adapter Screw.
When a Diazed fuse has blown, the
color coded indicator on the head of
the fuse will pop out, giving visible
indication through a glass window in the
Screw Cap.
The Fuse is held in place by the Screw
Cap, which is screwed into the Fuse
Base. Diazed Fuse Bases are available
in one and three pole designs. Fuse
Bases can be panel mounted or
snapped onto a standard 35mm DIN
rail.
Operating Classes
gL/gG - Slow Blow
Protect cable, equipment, and conduc-
tors from damage due to overloads and
short circuits.
Typical Markings: "T", Trage, gL/gG,
Vollschutz,
- Fast Blow
Fast Blow fuses are typically used to
protect equipment.
Typical Markings: "F", Flink, (the
absence of the snail symbol)
gR - Semiconductor Protection
Typically used for protecting semicon-
ductors like diodes, SCRs, etc. Current
limiting.
Typical Markings: Ultra Rapid™,
Ultra Quick™, Silized™,
Recticur™, gR,
Mostly red, orange, or blue imprint.
*Not standard rating.
**Refer to page indicated for additional selection
and ordering information. Dimensions to DIN 49360
Ø13.2mm
(.52 in.)
50mm
(1.97in.)