Deutsch SIMATIC S5 C79000-G8563-C471-04 Francais Betriebsanleitung Instructions Notice de mise en oeuvre English UV-Loschgerat UV-Eraser Appareil d'effacement par UV - Copyright Copyright Siemens AG 1998 All Rights Reserved Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts ist nicht gestattet, soweit nicht ausdrucklich zugestanden. Zuwiderhandlungen verpflichten zu Schadensersatz. Alle Rechte vorbehalten, insbesondere fur den Fall der Patenterteilung oder GM-Eintrag. Copyright Copyright Siemens AG 1998 All Rights Reserved The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright Copyright Siemens AG 1998 Tous droits reserves Toute communication ou reproduction de ce support d'information, toute exploitation ou communication de son contenu sont interdites, sauf autorisation expresse. Tout manquement a cette regle est illicite et expose son auteur au versement de dommages et interets. Tous nos droits sont reserves, notamment pour le cas de la delivrance d'un brevet ou celui de l'enregistrementd'un modele d'utilite. Siemens AG Bereich Automatisierungs- und Antriebstechnik Geschaftsgebiet Industrie-Automatisierungssysteme Postfach 4848, D-90327 Nurnberg Siemens Aktiengesellschaft C79000G8563C471 Printed in the Fed. Rep. of Germany Inhaltsverzeichnis 1 Technische Beschreibung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Anwendungsbereiche . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1-2 1.2 Aufbau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.3 1.4 Arbeitsweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Betriebshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1-4 1.5 Austausch der UV-Rohre . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.6 1.7 Hinweis zur CE-Kennzeichnung . . . . . . . . . . . . . . . . . . Bescheinigungen fur USA und Kanada . . . . . . . . . . . . 1-5 1-6 1.8 1.9 Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ersatzteile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 1-8 Technical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Notes on Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Replacing the UV Tube . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 Notes on the CE Symbol . . . . . . . . . . . . . . . . . . . . . . . . 1.7 Certification for the USA and Canada . . . . . . . . . . . . . 1.8 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1-2 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 Contents 1 SIMATIC S5 C79000-G8563-C471-04 iii Sommaire 1 iv Description technique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Domaine d'application . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Constitution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Fonctionnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Instructions d'utilisation . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Remplacement du tube UV . . . . . . . . . . . . . . . . . . . . . . 1.6 Remarques concernant la certification CE . . . . . . . . . 1.7 Certificats pour les U.S.A. et le Canada . . . . . . . . . . . 1.8 Caracteristiques techniques . . . . . . . . . . . . . . . . . . . . . 1.9 Pieces de rechange . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1-2 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 SIMATIC S5 C79000-G8563-C471-04 Deutsch SIMATIC S5 UV-Loschgerat Betriebsanleitung C79000-G8500-C471-04 Sicherheitstechnische Hinweise ! Warnung ! Vorsicht Qualifiziertes Personal Bestimmungsgemaer Gebrauch ! Marken Dieses Handbuch enthalt Hinweise, die Sie zu Ihrer personlichen Sicherheit sowie zur Vermeidung von Sachschaden beachten mussen. Die Hinweise sind durch ein Warndreieck hervorgehoben und je nach Gefahrdungsgrad folgendermaen dargestellt: bedeutet, da Tod, schwere Korperverletzung oder erheblicher Sachschaden eintreten konnen, wenn die entsprechenden Vorsichtsmanahmen nicht getroffen werden. bedeutet, da eine leichte Korperverletzung oder erheblicher Sachschaden eintreten konnen, wenn die entsprechenden Vorsichtsmanahmen nicht getroffen werden. Inbetriebsetzung und Betrieb eines Gerates darf nur anhand des Handbuchs erfolgen. Eingriffe in das Gerat durfen nur von qualifiziertemPersonal vorgenommen werden. Qualifiziertes Personal im Sinne der sicherheitstechnischen Hinweise dieses Handbuchs sind Personen, die die Berechtigung haben, Gerate, Systeme und Stromkreise gema den Standards der Sicherheitstechnik in Betrieb zu nehmen, zu erden und zu kennzeichnen. Beachten Sie folgendes: Warnung Das Gerat darf nur fur die im Katalog und in der technischen Beschreibung vorgesehenen Einsatzfalle und nur in Verbindung mit von Siemens empfohlenen bzw. zugelassenen Fremdgeraten und -Komponenten verwendet werden. Der einwandfreie und sichere Betrieb des Produktes setzt sachgemaen Transport,sachgemae Lagerung, Aufstellung und Montage sowie sorgfaltige Bedienung und Instandhaltung voraus. SIMATICR, SIMATIC NETR und SIMATIC HMIR sind eingetragene Marken der SIEMENS AG. Die Marken in diesem Handbuch konnen Marken sein, deren Benutzung durch Dritte fur deren Zwecke die Rechte der Inhaber verletzen konnen. Copyright E Siemens AG 1998 All Rights Reserved Haftungsausschlu Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts ist nicht gestattet, soweit nicht ausdrucklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere fur den Fall der Patenterteilung oder GM-Eintragung. Wir haben den Inhalt der Druckschrift auf Ubereinstimmung mit der beschriebenen Hard- und Software gepruft. Dennoch konnen Abweichungen nicht ausgeschlossen werden, so da wir fur die vollstandige Ubereinstimmung keine Gewahr ubernehmen. Die Angaben in dieser Druckschrift werden regelmaig uberpruft, und notwendige Korrekturen sind in den nachfolgenden Auflagen enthalten. Fur Verbesserungsvorschlage sind wir dankbar. Siemens AG Bereich Automatisierungs- und Antriebstechnik Geschaftsgebiet Industrie-Automatisierungssysteme Postfach 4848, D-90327 Nurnberg Siemens Aktiengesellschaft E Siemens AG 1998 Technische Anderungen bleiben vorbehalten. C79000-G8500-C471 Technische Beschreibung SIMATIC S5 C79000-G8500-C471-04 1 1-1 Technische Beschreibung 1.1 Anwendungsbereiche Das UV-Loschgerat loscht alle SIMATIC-S5-EPROM-Speicher. Fur den Betrieb in Landern mit einer Anschluspannung von 120 V/60 Hz wird eine Variante des Grundgerates angeboten. 1.2 Aufbau Die UV-Rohre ist in einem robusten Plastikgehause mit Kaltgeratsteckdose eingebaut. Die Loschzeit wird uber ein mechanisches Uhrwerk mit einem Drehknopf (1) eingestellt. Zur Aufnahme der EPROM-Speicher ist an der Frontseite eine Schublade (2) vorhanden. Diese Schublade ist so gestaltet, da keine UV-Strahlung aus dem Gerat austreten kann, wenn sie im eingeschalteten Zustand der UV-Rohre geoffnet wird. Drehknopf Schublade Bild 1-1 UV-Loschgerat Zur Aufnahme der GWE-EPROM-Speicher mu ein Adapter in der Schublade entfernt werden. Bei allen anderen Speichern sollte dieser Adapter eingelegt sein, um sicherzustellen, da alle zu loschenden EPROMs unterhalb des Loschfensters plaziert sind. 1-2 SIMATIC S5 C79000-G8500-C471-04 Technische Beschreibung 1.3 Arbeitsweise Das EPROM-Loschgerat ist betriebsbereit, wenn es an eine Netzspannung angeschlossen ist, die dem Spannungswert auf dem Typenschild des Gerats entspricht. Bevor die UV-Rohre eingeschaltet wird, legt man den zu loschenden EPROM-Speicher mit dem Glasfenster nach oben in die aufgezogene Schublade. Es mu eine Mindestloschzeit von 30 Min. mit dem Drehknopf eingestellt werden. Mit dem Aufziehen der Uhrfeder wird die UV-Rohre eingeschaltet. Nach Ablauf der eingestellten Zeit wird die Rohre automatisch abgeschaltet. Oberhalb der Schublade befindet sich eine optische Anzeige (blaues Licht) zur Kontrolle, wahrend die UV-Rohre in Betrieb ist. SIMATIC S5 C79000-G8500-C471-04 1-3 Technische Beschreibung 1.4 Betriebshinweise ! Vorsicht Das Loschgerat darf nur bei gezogenem Netzstecker demontiert werden. Beim Umgang mit den EPROM-Speichern mussen die MOS-Sicherheitsvorkehrungen eingehalten werden (siehe DIN IEC 47(CO) 701). Bei Umgebungstemperatur uber 35C ist nach jedem Loschvorgang (30 Min.) eine Pause von 30 Min. einzuhalten. Gilt nur fur 230 V Variante! ! Warnung Die UV/C-Strahlung ist eine sehr harte Strahlung und fuhrt in kurzester Zeit zu schmerzhaften Entzundungen der Augen und zu schweren Hautverbrennungen. Hinweis Werkseitig ist das Gerat auf eine feste Netzspannung eingestellt. Der Wahlschalter fur die Netzspannung darf nicht verstellt werden. Grundeinstellung 1-4 Geratevariante Schaltwalze 230 V 230 Vac 120 V 115 Vac SIMATIC S5 C79000-G8500-C471-04 Technische Beschreibung 1.5 Austausch der UV-Rohre Zum Auswechseln der UV-Rohre sind folgende Arbeitsschritte vorzunehmen: 1. Schrauben (4 x) am Gehauseboden herausdrehen 2. Rastnasen (4 x) mit einem Schraubendreher entriegeln und den Gehausedeckel abnehmen 3. Blechabdeckung nach oben abheben 4. UV-Rohre tauschen Das Schlieen des Gehauses erfolgt in umgekehrter Reihenfolge. ! Vorsicht Beim Austausch der UV-Rohre ist darauf zu achten, da die defekte Rohre als Sondermull behandelt wird (quecksilberhaltig). SIMATIC S5 C79000-G8500-C471-04 1-5 Technische Beschreibung 1.6 Hinweis zur CE-Kennzeichnung Fur das in diesem Handbuch beschriebene SIMATIC-Produkt gilt: EMVRichtlinie Dieses Produkt erfullt die Anforderung der EG-Richtlinie 89/336/EWG "Elektromagnetische Vertraglichkeit" und ist entsprechend der CE-Kennzeichnung fur folgenden Einsatzbereich ausgelegt: Einsatzbereiche Industriebereich Anforderung an Storaussendung Storfestigkeit EN 50081-2: 1993 EN 50082-2: 1995 Niederspannungsrichtlinie Dieses Produkt erfullt die Anforderung der EG-Richtlinie 73/23/EWG "Niederspannungsrichtlinie". Die Einhaltung dieser Norm wurde nach EN60950 gepruft. Konformitatserklarung Die EG-Konformitatserklarungen und die zugehorige Dokumentation werden gema der obengenannten EG-Richtlinien fur die zustandigen Behorden zur Verfugung gehalten bei: SiemensAktiengesellschaft Bereich Automatisierungs- und Antriebstechnik GeschaftsbereichIndustrie-Automatisierungsysteme Postfach 4848 D-90327 Nurnberg Produkte, die nicht mit dem CE-Kennzeichen versehen sind, erfullen die Anforderungen und Normen wie Sie im Kapitel "Technische Daten" angegeben sind. Aufbaurichtlinien beachten 1-6 Die Aufbaurichtlinien und Sicherheitshinweise, die im Handbuch angegeben sind, sind bei der Inbetriebnahme und im Betrieb zu beachten. SIMATIC S5 C79000-G8500-C471-04 Technische Beschreibung 1.7 Bescheinigungen fur USA und Kanada UL/CSA-Bescheinigung Wichtig fur USA und Kanada: Tragt das Gerat eines der folgenden Zeichen, liegt eine entsprechende Zulassung vor: Underwriters Laboratories (UL) nach Standard UL 1950 Underwriters Laboratories (UL) nach kanadischem Standard C22.2 No. 950 C UL-Recognition-Mark Canadian Standard Association (CSA) nach Standard C22.2. No. 950 NRTL Canadian Standard Association (CSA) nach amerikanischem Standard UL 1950 SIMATIC S5 C79000-G8500-C471-04 1-7 Technische Beschreibung 1.8 Technische Daten Netzanschlu 6ES5985-1AA11 6ES5985-1BA21 Nennstrom 6ES5985-1AA11 6ES5985-1BA21 230 V (+10% / - 10%), 48 bis 52 Hz 120 V (+6% / - 10%), 57 bis 63 Hz Sicherung T 0,250 A UV-Rohre Wellenlange Anfangsintensitat Lebensdauer Loschzeit 254 nm (UV-C, ozonfrei) ca. 12,5 mW/cm2 ca. 2000 Loschzyklen a 30 Min. mindestens 30 Min. Temperatur Betriebstemperatur Lagertemperatur Gewicht + 5C bis +40C - 20C bis +70C 2,1 kg Abmessungen (B x H x T) 190 mm x 83 mm x 280 mm 1-8 max. 0,2 A max. 0,2 A SIMATIC S5 C79000-G8500-C471-04 Technische Beschreibung 1.9 Ersatzteile Sicherung T 0,25A Netzleitung W79054-L4010-T250 * fur 230 V fur 120 V UV-Lampe (5 W) W79079-N2025-A3 W79079-N2012-A3 fur 230 V fur 120 V W79064-B2-B220 W79064-D1-B120 Schaltuhr W79055-A2001-D Drehknopf C79106-Z1145-A1 * Die Sicherung befindet sich unter der Abdeckung im Netzanschlumodul Bezugsort: R EWK Karlsruhe SIMATIC S5 C79000-G8500-C471-04 1-9 Technische Beschreibung Diese Seite ist eine Vakat-Seite, die an das Ende eines Kapitels mit ungerader Seitennummer angehangt wird. 1-10 SIMATIC S5 C79000-G8500-C471-04 SIMATIC S5 Instructions C79000-G8576-C471-04 English UV-Eraser Safety Guidelines This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and connected equipment. These notices are highlighted in the manual by a warning triangle and are marked as follows according to the level of danger: ! Warning ! Caution indicates that death, severe personal injury or substantial property damage will result if proper precautions are not taken. indicates that minor personal injury or property damage can result if proper precautions are not taken. Qualified Personnel Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and systems in accordance with established safety practices and standards. Correct Usage Please note the following: ! Trademarks Warning This device and its components may only be used for the applications described in the catalog or the technical description, and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and operated and maintained as recommended. SIMATICR, SIMATIC NETR and SIMATIC HMIR are registered trademarks of SIEMENS AG. Third parties using for their own purposes any other names in this document which refer to trademarks might infringe upon the rights of the trademark owners. Copyright E Siemens AG 1998 All Rights Reserved Discalimer of Liability The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. We have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are welcomed. Siemens AG Bereich Automatisierungs- und Antriebstechnik Geschaeftsgebiet Industrie-Automatisierungssysteme Postfach 4848, D-90327 Nuernberg Siemens Aktiengesellschaft E Siemens AG 1998 Subject to change without prior notice C79000-G8576-C471 Technical Description SIMATIC S5 C79000-G8576-C471-04 1 1-1 Technical Description 1.1 Application The UV eraser erases all SIMATIC S5 EPROMs. For operation in countries with a mains voltage of 120V/60 Hz, a special version of the instrument is available. 1.2 Design The UV tube is mounted in a rugged plastic casing with appliance plug. The erasing time is set by means of a mechanical clockwork with rotary knob (1). A drawer (2) on the front panel is provided to take the EPROM. This drawer is designed in such way that no UV radiation can emerge from the instrument when the drawer is opened during operation of the UV tube. Rotary knob Drawer Figure 1-1 UV-Eraser Before GWE EPROMs can be inserted, it is necessary to remove an adapter from the drawer. This adapter must be inserted for all memories to guarantee that all the EPROMs to be erased are located under the eraser window. 1-2 SIMATIC S5 C79000-G8576-C471-04 Technical Description 1.3 Operation The EPROM eraser is ready for operation after connection to a mains voltage that corresponds to the value on the rating plate of the device. Insert the EPROM to be erased with its glass window face up into the drawer before switching on the UV lamp. A minimum erasing time of 30 minutes must be set with the rotary knob. The UV tube is switched on by winding up the clock spring. It is switched off after the set time has expired. An optical indicator (blue light) placed above the drawer is lit during operation of the UV tube. SIMATIC S5 C79000-G8576-C471-04 1-3 Technical Description 1.4 Notes on Operation ! Caution The mains plug of the eraser must be pulled before removing the eraser. MOS security regulations must be observed when handling EPROMs (cf DIN IEC 47(CO) 701). When working in ambient temperatures of more than 35C, you should wait for 30 minutes after erasing an EPROM. This only applies to the 230 V model. ! Warning UV/C radiation is very strong and results in painful eye inflammation and severe skin burns in a very short period of time. Note The device is set for a fixed supply voltage before leaving the factory. The voltage selection switch must not be adjusted. Basic Settings 1-4 Device Model Drum Controller 230 V 230 V AC 120 V 115 V AC SIMATIC S5 C79000-G8576-C471-04 Technical Description 1.5 Replacing the UV Tube To replace the UV tube, proceed as follows: 1. Remove the screws (4 x) from the underside of the casing. 2. Release the snap-in lockings (4 x) with a screwdriver and remove the lid of the casing. 3. Lift the metal cover upwards and off. 4. Replace the UV tube. To close the casing, follow the above instructions in reverse order. ! Caution When replacing the UV tube, bear in mind that the defective tubes have to be disposed of as special refuse (because of their mercury content). SIMATIC S5 C79000-G8576-C471-04 1-5 Technical Description 1.6 Notes on the CE Symbol The following applies to the SIMATIC product described in this manual: EMC Directive This product fulfils the requirements for the EC directive 89/336/EEC on "electromagnetic compatibility" and the following fields of application apply according to this CE symbol: Field of Application Industry Requirement for Emitted Interference Noise Immunity EN 50081-2: 1993 EN 50082-2: 1995 Low Voltage Directive This product fulfils the requirements for the EC directive 73/23/EEC on "low voltage" and was tested to EN60950. Declaration of Conformity The EC declarations of conformity and the documentation relating to this are available to the authorities concerned, according to the above EC directive, Article 10 (1), from: SiemensAktiengesellschaft Bereich Automatisierungs- und Antriebstechnik GeschaeftsbereichIndustrie-Automatisierungssysteme Postfach 4848 D-90327 Nuernberg Products which are not marked with the CE Symbol fulfill the requirements and standards specified in the "Technical Data" section. Observing the Setup Guidelines 1-6 The setup guidelines and notes on safety given in the manual must be observed on startup and during operation. SIMATIC S5 C79000-G8576-C471-04 Technical Description 1.7 Certification for the USA and Canada UL/CSA Certification Important for the USA and Canada: If the unit carries one of the following symbols it has been approved by the corresponding body: Underwriters Laboratories (UL) to the UL 1950 standard. Underwriters Laboratories (UL) to Canadian standard C22.2 No. 950. C UL Recognition Mark Canadian Standard Association (CSA) to standard C22.2. No. 950. NRTL Canadian Standard Association (CSA) to American standard UL 1950. SIMATIC S5 C79000-G8576-C471-04 1-7 Technical Description 1.8 Technical Data Mains supply 6ES5985-1AA11 6ES5985-1BA21 Rated current 6ES5985-1AA11 6ES5985-1BA21 230 V (+10% / - 10%), 48 to 52 Hz 120 V (+6% / - 10%), 57 to 63 Hz Fuse 0.250 A, slow UV tube Wavelength Start-up intensity Durability Erasing cycle 254 nm (UV-C, ozone free) approx. 12.5 mW/cm2 approx. 2000 erasing cycles every 30 min. min. 30 minutes Temperature Operating temperature Storage temperature Weight + 5C to +40C - 20C to +70C 2.1 kg Dimensions (w x h x d) 190 mm x 83 mm x 280 mm 1-8 max. 0.2 A max. 0.2 A SIMATIC S5 C79000-G8576-C471-04 Technical Description 1.9 Spare Parts Fuse 0.25A, slow Mains cable W79054-L4010-T250 * for 230 V for 120 V UV lamp (5 W) W79079-N2025-A3 W79079-N2012-A3 for 230 V for 120 V W79064-B2-B220 W79064-D1-B120 Timer W79055-A2001-D Rotary knob C79106-Z1145-A1 * The fuse is located below the cover in the power supply submodule. Order from: R EWK Karlsruhe SIMATIC S5 C79000-G8576-C471-04 1-9 Technical Description Diese Seite ist eine Vakat-Seite, die an das Ende eines Kapitels mit ungerader Seitennummer angehangt wird. 1-10 SIMATIC S5 C79000-G8576-C471-04 SIMATIC S5 Appareil d'effacement par UV Notice de mise en oeuvre Francais C79000-G8577-C471-04 Informations relatives a la securite ! ! Personnel qualifie Ce manuel contient des consignes et des avertissements que vous devez respecter pour votre securite personelle ainsi que por eviter des dommages materiels. Les consignes de securite sont mises en evidence par un triangle et son presentees, selon le risque encouru, de la facon suivante: Attention signifie que la non-application des mesures de precaution appopriees peut conduire a mort, a des lesions corporelles graves ou a un dommage materiel important. Avertissement signifie que la non-application des mesures de precaution appopriees peut conduire a des lesions corporelles legeres ou a un dommage materiel. La mise en service et l'utilisation de la console ne doivent etre effectuees que conformement au manuel. Seules des personnes qualifiees sont autorisees a effectuer des interventions sur la console. Il s'agit de personnes qui ont l'autorisation de mettre en service, de mettre a la terre et de reperer des appareils, systemes et circuits electriques conformement aux regles de securite en vigueur. Utilisations conforme aux dispositions ! Marque de fabrique Tenez compte des points suivants: Attention La console ne doit etre utilisee que pour les applications specifiees dans le catalogue ou dans la description technique, et exclusivement avec des peripheriques et composants recommandes par Siemens. Le transport, le stockage, le montage, la mise en service ainsi que l'utilisation et la maintenance adequats de la console sont les conditions indispensables pour garantir un fonctionnement correct et sur du produit. SIMATICR, SIMATIC NETR et SIMATIC HMIR sont des marques deposees par SIEMENS AG. Certaines marques utilisees dans le present manuel sont des marques protegees dont l'utilisation risque d'enfreindre les droits de tiers.fur deren Zwecke die Rechte der Inhaber verletzen konnen. Copyright E Siemens AG 1998 Tous droits reserves Exclusion de resposabilite Toute communication ou reproduction de ce support d'information, toute exploitation ou communication de son contenu sont interdites, sauf autorisation expresse. Tout manquement a cette regle est illicite et expose son auteur au versement de dommages et interets. Tous nos droits sont reserves, notamment pour le cas de la delivrance d'un brevet ou celui de l'enregistrement d'un modele d'utilite. Nous avons verifie la conformite du contenu du present manuel avec le materiel et le logiciel qui y sont decrits. Or des divergences n'etant pas exclues, nous ne pouvons pas nous porter garants pour la conformite integrale. Si l'usage de ce manuel devait reveler des erreurs, nous en tiendrons compte et apporterons les corrections necessaires des la prochaine edition. Veuillez nous faire part de vos suggestions. Siemens AG Bereich Automatisierungs- und Antriebstechnik Geschaeftsgebiet Industrie-Automatisierungssysteme Postfach 4848, D-90327 Nuernberg Siemens Aktiengesellschaft E Siemens AG 1998 Sous reserve de modifications C79000-G8577-C471 Description technique SIMATIC S5 C79000-G8577-C471-04 1 1-1 Description technique 1.1 Domaine d'application L'effaceur d'EPROM par UV efface toutes les memoires EPROM SIMATIC S5. Un modele special de l'appareil de base est disponible pour une mise en service dans les pays dans lequels la tension secteur est de 120 V/60 Hz. 1.2 Constitution Le tube UV est integre a un boitier en plastique robuste equipe d'un connecteur d'alimentation. Le temps d'effacement se regle a l'aide d'une minuterie munie d'un bouton de reglage rotatif (1). La face avant de l'effaceur est equipee d'un tiroir (2) dans lequel l'on introduit les memoires EPROM. Ce tiroir est concu de sorte qu'aucun rayonnement UV ne puisse etre emis de l'appareil si on l'ouvre pendant le fonctionnement du tube UV. Bouton de reglage Tiroir Figure 1-1 Appareil d'effacement par UV Pour introduire les memoires GWE-EPROM, vous devez retirer l'adaptateur qui se trouve dans le tiroir. Pour toutes les autres memoires, l'adaptateur doit etre mis en place pour garantir que les EPROM a effacer sont correctement positionnees sous la fenetre d'effacement. 1-2 SIMATIC S5 C79000-G8577-C471-04 Description technique 1.3 Fonctionnement L'effaceur d'EPROM est pret a fonctionner lorsqu'il est connecte a la tension secteur correspondant a la valeur indiquee sur la plaque signaletique de l'appareil. Avant d'allumer le tube UV, la memoire EPROM a effacer doit etre placee - fenetre transparente vers le haut - dans le tiroir ouvert. Un temps d'effacement minimum de 30 minutes doit etre selectionne a l'aide de la minuterie. C'est la mise en route de la minuterie qui fait fonctionner le tube UV. Celui-ci s'arrete automatiquement apres ecoulement du temps regle. Un temoin lumineux (lumiere bleue) situe au-dessus du tiroir indique le fonctionnement du tube UV. SIMATIC S5 C79000-G8577-C471-04 1-3 Description technique 1.4 Instructions d'utilisation ! Avertissement L'effaceur ne doit etre demonte que lorsque la fiche secteur est debranchee. Lors de la manipulation des memoires EPROM, les consignes de securite MOS doivent etre respectees (voir DIN CEI 47 (CO) 701). Pour une temperature ambiante superieure a 35C, une pause de 30 minutes doit etre respectee apres chaque effacement. Ne s'applique qu'au modele 230 V de l'appareil ! ! Attention Le rayonnement UV/C est un rayonnement tres intensif qui provoque en un temps minime des inflammations oculaires douloureuses ainsi que de graves brulures cutanees. Nota L'effaceur est regle a une tension secteur fixe a l'usine. Le selecteur de tension ne doit en aucun cas etre actionne. Selection de base 1-4 Modele d'appareil Combinateur 230 V 230 Vac 120 V 115 V ac SIMATIC S5 C79000-G8577-C471-04 Description technique 1.5 Remplacement du tube UV Pour remplacer le tube UV, procedez aux etapes suivantes : 1. Devissez les (4) vis du socle du boitier. 2. A l'aide d'un tournevis, deverrouillez les (4) ergots de fixation, puis retirez le couvercle de l'appareil. 3. Deposez le cache metallique en le soulevant vers le haut. 4. Remplacez le tube UV. Refermez le boitier en procedant dans l'ordre inverse. ! Avertissement Lors du remplacement du tube UV, veillez a traiter le tube defectueux comme un dechet special (contient du mercure). SIMATIC S5 C79000-G8577-C471-04 1-5 Description technique 1.6 Remarques concernant la certification CE Regles applicables au produit SIMATIC decrit dans ce manuel : Directives europeennes CEM Ce produit satisfait aux exigences de la directive europeenne 89/336/CEE "Compatibilite electromagnetique" ainsi qu'aux normes europeennes harmonisees (EN) pour les domaines d'emploi mentionnes ci-apres : Domaine d'emploi Industriel Exigences concernant Emission de perturbations Immunite aux perturbations EN 50081-2: 1993 EN 50082-2: 1995 Directives de basse tension Ce produit satisfait aux exigences de la directive europeenne 73/23/EWG "Directives de basse tension". Le respect de cette norme est garanti par EN60950. Declarations de conformite Les declarations de conformite a la directive europeenne ainsi que la documentation s'y referant conformement a la directive susnommee sont disponibles pour les autorites competentes aupres de l'adresse suivante : SiemensAktiengesellschaft Bereich Automatisierungs- und Antriebstechnik GeschaeftsbereichIndustrie-Automatisierungssysteme Postfach 4848 D-90327 Nuernberg Les produits ne possedant pas la certification CE repondent aux exigences et normes citees dans le paragraphe "Caracteristiques techniques". Respect des directives de montage 1-6 Les directives de montage et les informations relatives a la securite specifiees dans la documentation doivent etre respectees lors de l'installation et de l'exploitation des produits SIMATIC. SIMATIC S5 C79000-G8577-C471-04 Description technique 1.7 Certificats pour les U.S.A. et le Canada Homologation UL/CSA Important pour les U.S.A. et le Canada : Si l'appareil porte une des marques suivantes, il est homologue en consequence : Underwriters Laboratories (UL) selon standard UL 1950 Underwriters Laboratories (UL) selon standard canadien C22.2 No. 950 C UL-Recognition-Mark Canadian Standard Association (CSA) selon standard C22.2. No. 950 NRTL SIMATIC S5 C79000-G8577-C471-04 Canadian Standard Association (CSA) selon standard americain UL 1950 1-7 Description technique 1.8 Caracteristiques techniques Branchement au reseau 6ES5985-1AA11 6ES5985-1BA21 Courant nominal 6ES5985-1AA11 6ES5985-1BA21 230 V (+10% / - 10%), 48 a 52 Hz 120 V (+6% / - 10%), 57 a 63 Hz Fusible 0,250 A, lent Lampe UV Longueur d'onde Intensite de depart Durabilite Temps d'effacement 254 nm (UV-C, sans ozone) env. 12,5 mW/cm2 env. 2000 cycles d'effacement de 30 min. 30 min. minimum Temperature Temperature de service Temperature de stockage Poids + 5C a +40C - 20C a +70C 2,1 kg Dimensions (l x h x p) 190 mm x 83 mm x 280 mm 1-8 0,2 A max. 0,2 A max. SIMATIC S5 C79000-G8577-C471-04 Description technique 1.9 Pieces de rechange Fusible 0,25A, lent Cable d'alimentation W79054-L4010-T250 * pour 230 V pour 120 V Lampe a UV (5W) W79079-N2025-A3 W79079-N2012-A3 pour 230 V pour 120 V W79064-B2-B220 W79064-D1-B120 Minuterie W79055-A2001-D Bouton de reglage C79106-Z1145-A1 * Le fusible se trouve sous le couvercle de l'adaptateur secteur. A commander a : R EWK Karlsruhe SIMATIC S5 C79000-G8577-C471-04 1-9 Description technique 1-10 SIMATIC S5 C79000-G8577-C471-04