F-219 SEAM8-30-S02.0-S-06-2-K SEAM8-20-S02.0-S-04-2-GP-K (0.80 mm) .0315" SEAM8 SERIES ULTRA-HIGH DENSITY OPEN-PIN-FIELD Up to 500 I/Os Board Mates: SEAF8 Cable Mates: ESCA Standoffs: JSO SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SEAM8 Insulator Material: Black LCP Contact Material: Copper Alloy Plating: Au or Sn over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +125 C Current Rating: 1.3 A per pin (10 adjacent pins powered) Working Voltage: 220 VAC RoHS Compliant: Yes Lead-Free Solderable: Yes 7 mm and 10 mm stack heights Lead-Free solder charge terminations POWER/SIGNAL APPLICATION 4, 6, 8 and 10 rows HIGH-SPEED CHANNEL PERFORMANCE Signal Integrity optimized Edge Rate(R) contact SEAM8/SEAF8 @ 7 mm Mated Stack Height Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com Compatible with UMPT/UMPS for flexible two-piece power/signal solutions RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality SEAM8 NO. PINS PER ROW LEAD STYLE PLATING OPTION NO. OF ROWS SOLDER TYPE OPTION K FILE NO. E111594 ALSO AVAILABLE (MOQ Required) * Other pin counts -10, - 20, - 30, -40, -50 (Standard sizes) MATED HEIGHT* SEAF8 LEAD STYLE -05.0 (7.00) .276 A -04 (4.30) .169 (6.30) .248 (8.30) .327 (10.30) .406 -S05.0 -08 (10.00) .394 -10 *Processing conditions will affect mated height. = 2 mm Body Height -S05.0 NO. OF ROWS -06 SEAM8 LEAD STYLE -S02.0 -S02.0 = 5 mm Body Height -L - 04 = 10 " (0.25 m) Gold on contact area, Matte Tin on solder tail = Four Rows - 06 = Six Rows -S - GP = Eight Rows -10 = Ten Rows 01 (0.75) .029 A LEAD STYLE B -S02.0 (4.54) .179 (7.54) .297 -S05.0 06 (0.70) .028 Notes: Patent Pending Tape & Reel packaging is standard. Some sizes, styles and options are non-standard, non-returnable. (1.27) .050 B (1.02) .040 (1.32) .052 DIA (1.10) (1.32) .043 x .052 (0.80) .0315 No. of positions x (0.80) .0315 + (2.56) .101 SEAM8-30-XXX.X-X-06-2 SHOWN Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM -K = Guide Post (-S02.0 lead = Polyimide style only) film Pick & (Mates with Place Pad SEAF8-RA-GP) -08 = 30 " (0.76 m) Gold on contact area, Matte Tin on solder tail No. of positions x (0.80) .0315 + (5.84) .230 -2 = Lead-Free Solder Charge All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.