19 18 17 L 16 15 14 13 12 11 10 9 DIM. A REF. DIM. B 2.41 .095 BOTH ENDS K 10.16 MIN. PIN .400 INSERTION 2.54 TYP .100 3.96 TYP .156 1.47 .058 TERMINAL SHOWN FOR REFERENCE ONLY SEE NOTE 6 OPTIONAL RAMP .045 PIN 6.60 .260 J 1.40 .055 SQ. TYP 4.65 REF .183 OPTIONAL MOLDED VOID(S) SEE CHART FOR LOCATION H CIRCUIT NUMBER 1 8 7 5 6 4 3 2 1 NO. OF DIM. A REF. CKTS. NOTES: 8.79 2 (.346) 1. MATERIAL: N - GLASS FILLED POLYESTER, UL94V-0, MOLDED NATURAL 12.75 2. FINISH: SEE TERMINAL DRAWINGS 3 (.502) 3. PRODUCT SPECIFICATION: PS-08-50, PS-40-02, AND PS-45570-001 16.71 4. PACKAGING INFORMATION: SEE LEGEND 4 (.658) 5. MATES WITH 3.96/(1.56) CENTER HEADERS AND 1.14/(.045) SQUARE 20.67 OR ROUND PINS 5 (.814) 6. HOUSING ACCEPTS STANDARD TERMINAL NOS.: 24.64 6 2478 (18-24 AWG) WITH 2.79/(.110) MAX. INSULATION DIA. (.970) 2578 (22-26 AWG) WITH 1.65/(.065) MAX. INSULATION DIA. 28.60 7 (1.126) OR TRIFURCON TERMINAL NOS.: 32.56 6838 (18-24 AWG) WITH 2.79/(.110) MAX. INSULATION DIA. 8 (1.282) 7258 (22-26 AWG) WITH 1.65/(.065) MAX. INSULATION DIA. 36.53 OR MARKK TERMINAL NO.: 9 (1.438) 45570 (18-20 AWG) WITH 3.12/(.123) MAX. INSULATION DIA. 40.49 10 7. BOW .006 MM/MM / (.006 IN/IN). (1.594) 8. (0.13)/.005 MAX. FLASH ALLOWED ALONG DIMENSION B AND 44.45 11 (1.750) IN LOCKING WINDOW. 48.41 9. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC 12 (1.906) SPECIFICATION PS-45499-002. 52.37 13 10. GEOMETRY ON THIS SHEET APPLIES TO 7-14 CIRCUIT PARTS WITH WINDOW GEOMETRY. (2.062) SEE SHEET 2 FOR 7-14 CIRCUIT PARTS WITHOUT WINDOW GEOMETRY. 56.34 14 (2.218) SEE SHEET 3 FOT 2-6 CIRCUIT PARTS WITHOUT WINDOW GEOMETRY. DIM. B 3.960.05 (.156.002) 7.920.08 (.312.003) 11.890.08 (.468.003) 15.850.08 (.624.003) 19.810.10 (.780.004) 23.770.10 (.936.004) 27.740.10 (1.092.004) 31.700.10 (1.248.004) 35.660.15 (1.404.006) 39.620.15 (1.560.006) 43.590.15 (1.716.006) 47.550.15 (1.872.006) 51.510.18 (2.028.007) G L K J H G 15.88 .625 F F 41695 - * - * N - ## MATERIAL CODE N=MOLDED NATURAL E E OPTION CODE D VOID CODE BLANK=NO VOIDS NO.=NO.CORRESPONDS TO CKT. NO. VOIDED MULT. VOIDS=START WITH 51 WITH RAMPS AND POLARIZING RIBS 1.55 0.05 TYP .061 .002 D 2.54 REF .100 0.46 0.13 TYP .018 .005 D OPTION CODE CODE RAMP POLARIZING PACKAGE PER RIBS A BULK PK-41695-001 NO NO B BULK PK-41695-001 YES NO D BULK PK-41695-001 YES YES WHEN MATING OPTION CODE D HOUSING WITH BREAKAWAY FRICTION LOCK OR POLARIZING HEADER, THE END FRICTION LOCKS OR POLARIZING WALLS MUST BE REMOVED. NO. OF CKTS. C C 3.05 TYP .120 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) WHEN MATING WITH BREAKAWAY HEADERS THE FRICTION LOCK WALL MUST BE REMOVED B MM 3 PLACES 0.005 2 PLACES 0.13 0.25 0 PLACES A ANGULAR TOL DOCUMENT STATUS 19 P1 18 RELEASE DATE 17 2018/06/08 16 INCH 4 PLACES 1 PLACE FORMAT: Eng-lega-master-tb-prod-D REVISION: D DATE: 2018/01/18 CURRENT REV DESC: 7-14CKT PROD CHANGE 0.01 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:14:20 15 14 13 12 11 10 9 8 7 6 B EC NO: 177792 DRWN: RLALSANGI CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: SKOWRONSKI APPR: FSMITH THIRD ANGLE PROJECTION 5 KK (3.96)/.156 CRIMP TERMINAL HOUSING 2018/03/28 2018/06/08 2018/06/08 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1986/04/05 2012/01/13 DRAWING SERIES D-SIZE 41695 4 SD-41695 MATERIAL NUMBER SEE CHART 3 PSD 001 L SHEET NUMBER CUSTOMER GENERAL MARKET 2 1 OF 3 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M OPTION CODE A OPTION CODE B L L K K CIRCUIT NUMBER 1 1.47 REF .058 2.54 REF .100 J J H H GROOVE MAY BE PRESENT (BOTH SIDES) GROOVE MAY BE PRESENT (BOTH SIDES) G G NOTES: GEOMETRY ON THIS SHEET APPLIES TO 7-14 CIRCUIT PARTS WITHOUT WINDOW GEOMETRY. SEE SHEET 1 FOR ALL OTHER DIMENSIONS. F F OPTION CODE D E E D D 0.89 .035 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C 2.79 .110 DIMENSION UNITS SCALE MM/IN 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM B 3.05 REF .120 3 PLACES 0.005 2 PLACES 0.13 0.25 1 PLACE DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: D DATE: 2018/01/18 20 19 P1 RELEASE DATE 18 2018/06/08 17 10:14:20 16 15 14 13 0.01 ANGULAR TOL GROOVE MAY BE PRESENT (BOTH SIDES) INCH 4 PLACES 0 PLACES A CURRENT REV DESC: 7-14CKT PROD CHANGE 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 12 11 10 9 8 7 EC NO: 177792 DRWN: RLALSANGI CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: SKOWRONSKI APPR: FSMITH THIRD ANGLE PROJECTION 6 2018/03/28 2018/06/08 2018/06/08 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1986/04/05 2012/01/13 DRAWING SERIES D-SIZE 41695 5 KK (3.96)/.156 CRIMP TERMINAL HOUSING SD-41695 MATERIAL NUMBER GENERAL MARKET 3 L SHEET NUMBER CUSTOMER SEE CHART 4 PSD 001 2 2 OF 3 1 A 20 19 18 17 16 15 14 13 12 11 10 9 M OPTION CODE A L K 5 4 3 2 PART NO. 09-50-8021 09-50-8031 09-50-8041 09-50-8051 09-50-8061 09-50-8071 09-50-8081 09-50-8091 09-50-8101 09-50-8111 09-50-8121 09-50-8131 09-50-8141 09-50-9030 2.54 REF .100 1.47 REF .058 J 6 41695-N-AN-* PART NO. ENG. NO. VOIDS NOT AVAILABLE 09-50-8020 41695-N-A2 09-50-8030 41695-N-A3 09-50-8040 41695-N-A4 09-50-8050 41695-N-A5 09-50-8060 41695-N-A6 09-50-8070 41695-N-A7 09-50-8080 41695-N-A8 09-50-8090 41695-N-A9 09-50-8100 41695-N-A10 09-50-8110 41695-N-A11 09-50-8120 41695-N-A12 09-50-9085 41695-N-A8-2 2 41695-0001 41695-N-A6-3 3 4 41695-0002 41695-N-A5-4 OPTION CODE B CIRCUIT NUMBER 1 7 8 09-50-9121 09-50-9060 09-50-9070 09-50-9071 09-50-9040 09-50-9090 H GROOVE MAY BE PRESENT (BOTH SIDES) 09-50-9136 09-50-9137 09-50-9050 09-50-9061 09-50-9080 41695-0005 41695-0006 GROOVE MAY BE PRESENT (BOTH SIDES) G NOTES: GEOMETRY ON THIS SHEET APPLIES TO 2-6 CIRCUIT PARTS WITHOUT WINDOW GEOMETRY. SEE SHEET 1 FOR ALL OTHER DIMENSIONS. E D 0.89 .035 2.79 .110 C 41695-N-BN-* ENG. NO. VOIDS NOT AVAILABLE 41695-N-B2 41695-N-B3 41695-N-B4 41695-N-B5 41695-N-B6 41695-N-B7 41695-N-B8 41695-N-B9 41695-N-B10 41695-N-B11 41695-N-B12 41695-N-B13 41695-N-B14 41695-N-B3-2 2 41695-N-B4-2 2 41695-N-B5-2 2 41695-N-B9-2 2 41695-N-B11-2 2 41695-N-B12-2 2 41695-N-B14-2 2 5 41695-N-B6-5 41695-N-B7-6 6 41695-N-B7-2 2 41695-N-B4-3 3 7 41695-N-B9-7 41695-N-B14-13 13 5 41695-N-B13-5 41695-N-B13-8 8 41695-N-B5-51 2,4 41695-N-B6-3 3 41695-N-B8-2 2 41695-N-B7-3 3 41695-N-B14-51 5,9 41695-N-DN-* PART NO. ENG. NO. VOIDS NOT AVAILABLE 09-50-8023 41695-N-D2 09-50-8033 41695-N-D3 09-50-8043 41695-N-D4 09-50-8053 41695-N-D5 09-50-8063 41695-N-D6 09-50-8073 41695-N-D7 09-50-8083 41695-N-D8 09-50-8093 41695-N-D9 09-50-8103 41695-N-D10 09-50-8113 41695-N-D11 09-50-8123 41695-N-D12 09-50-8133 41695-N-D13 09-50-8143 41695-N-D14 09-50-9053 41695-N-D5-2 2 09-50-9094 41695-N-D9-3 3 09-50-9033 41695-N-D3-2 2 09-50-9043 41695-N-D4-2 2 09-50-9063 41695-N-D6-2 2 09-50-9073 41695-N-D7-2 2 09-50-9044 41695-N-D4-3 3 5 41695-0003 41695-N-D07-5 F OPTION CODE D 1 M L K J H G F E D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE MM/IN 4:1 CURRENT REV DESC: 7-14CKT PROD CHANGE GENERAL TOLERANCES (UNLESS SPECIFIED) MM 3.05 REF .120 B 4 PLACES 3 PLACES 0.005 2 PLACES 0.13 0.25 1 PLACE 0 PLACES GROOVE MAY BE PRESENT (BOTH SIDES) A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: D DATE: 2018/01/18 20 19 P1 RELEASE DATE 18 2018/06/08 17 15 14 0.01 ANGULAR TOL 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:14:20 16 INCH 13 12 11 10 9 8 7 EC NO: 177792 DRWN: RLALSANGI CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: SKOWRONSKI APPR: FSMITH THIRD ANGLE PROJECTION 6 2018/03/28 2018/06/08 2018/06/08 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1986/04/05 2012/01/13 DRAWING SERIES D-SIZE 41695 5 KK (3.96)/.156 CRIMP TERMINAL HOUSING SD-41695 MATERIAL NUMBER GENERAL MARKET 3 L SHEET NUMBER CUSTOMER SEE CHART 4 PSD 001 2 3 OF 3 1 A