P6KE TransilTM, transient voltage surge suppressor (TVS) Datasheet - production data Features Peak pulse power: 600 W (10/1000 s ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping factor Fast response time UL recognized Complies with the following standards IEC 61000-4-2 level 4 - 15 kV (air discharge) - 8 kV (contact discharge) MIL STD 883G, method 3015-7 Class 3 - HBM (human body model) DO-15 (DO-204AC) Description Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC's. TM:Transil is a trademarks of STMicroelectronics. April 2012 This is information on a product in full production. Doc ID 3068 Rev 7 1/9 www.st.com 9 Characteristics P6KE 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 C) Symbol Parameter Value Unit Peak pulse power dissipation(1) Tj initial = Tamb 600 W Power dissipation on infinite heatsink Tamb = 75 C 5 W IFSM Non repetitive surge peak forward current for unidirectional types tp = 10 ms Tj initial = Tamb 100 A Tstg Storage temperature range -65 to + 175 C PPP P Tj Maximum operating junction temperature 175 C TL Maximum lead temperature for soldering during 10 s at 5 mm from case. 260 C Value Unit 1. For a surge greater than the maximum values, the diode will fail in short-circuit. Table 2. Thermal resistances Symbol Parameter Rth(j-l) Junction to leads 20 Rth(j-a) Junction to ambient on printed circuit. L lead = 10 mm 75 Figure 1. C/W Electrical characteristics - definitions Symbol VRM VBR VCL IRM IPP T VF RD Figure 2. Parameter Stand-off voltage Breakdown voltage Clamping voltage Leakage current @ VRM Peak pulse current Voltage temperature coefficient Forward voltage drop Dynamic resistance Unidirectional I I IF IPP VF VCL VBR VRM V V IRM IR IPP IPP Repetitive pulse current tr = rise time (s) tp = pulse duration time (s) 2/9 IR IRM IRM IR Pulse definition for electrical characteristics tr VCLVBR VRM tp Doc ID 3068 Rev 7 VRMVBR VCL Bidirectional P6KE Characteristics Table 3. Electrical characteristics - values (Tamb = 25 C) IRM @ VRM(1) VCL @ IPP 10/1000 s VBR @ IR(2) Order code max min nom max Unidirectional Bidirectional A V V V P6KE6V8A P6KE6V8CA 10 5.8 6.45 6.8 P6KE7V5A P6KE7V5CA 10 6.4 7.13 P6KE10A P6KE10CA 1 8.55 P6KE12A P6KE12CA 0.5 P6KE15A P6KE15CA P6KE18A V max mA VCL @ IPP 8/20s T(3) C(4) max max typ 10-4/ C pF V A V A 7.14 10 10.5 57 13.4 298 5.7 4000 7.5 7.88 10 11.3 53 14.5 276 6.1 3700 9.5 10 10.5 1 14.5 41 18.6 215 7.5 2800 10 11.4 12 12.6 1 16.7 36 21.7 184 7.8 2300 0.5 13 14.3 15 15.8 1 21.2 28 27.2 147 8.4 1900 P6KE18CA 0.5 15 17.1 18 18.9 1 25.2 24 32.5 123 8.8 1600 P6KE22A P6KE22CA 0.5 19 20.9 22 23.1 1 30.6 20 39.3 102 9.2 1350 P6KE24A P6KE24CA 0.5 20 22.8 24 25.2 1 33.2 18 42.8 93 9.4 1250 P6KE27A P6KE27CA 0.5 23 25.7 27 28.4 1 37.5 16 48.3 83 9.6 1150 P6KE30A P6KE30CA 0.5 26 28.5 30 31.5 1 41.5 14.5 53.5 75 9.7 1075 P6KE33A P6KE33CA 0.5 28 31.4 33 34.7 1 45.7 13.1 59 68 9.8 1000 P6KE36A P6KE36CA 0.5 31 34.2 36 37.8 1 49.9 12 64.3 62 9.9 950 P6KE39A P6KE39CA 0.5 33 37.1 39 41.0 1 53.9 11.1 69.7 57 10.0 900 P6KE47A P6KE47CA 0.5 40 44.7 47 49.4 1 64.8 9.3 84 48 10.1 800 P6KE56A P6KE56CA 0.5 48 53.2 56 58.8 1 77 7.8 100 40 10.3 700 P6KE68A P6KE68CA 0.5 58 64.6 68 71.4 1 92 6.5 121 33 10.4 625 P6KE82A P6KE82CA 0.5 70 77.9 82 86.1 1 113 5.3 146 27 10.5 550 P6KE100A P6KE100CA 0.5 85 95.0 100 105 1 137 4.4 178 22.5 10.6 500 P6KE120A P6KE120CA 0.5 102 114 120 126 1 165 3.6 212 19 10.7 450 P6KE150A P6KE150CA 0.5 128 143 150 158 1 207 2.9 265 15 10.8 400 P6KE180A P6KE180CA 0.5 154 171 180 189 1 246 2.4 317 12.6 10.8 360 P6KE200A P6KE200CA 0.5 171 190 200 210 1 274 2.2 353 11.3 10.8 350 P6KE220A P6KE220CA 0.5 188 209 220 231 1 328 1.85 388 10.3 10.8 330 P6KE250A P6KE250CA 0.5 213 237 250 263 1 344 1.75 442 9 11 310 P6KE300A P6KE300CA 0.5 256 285 300 315 1 414 1.45 529 7.6 11 290 P6KE350A P6KE350CA 0.5 299 332 350 368 1 482 1.25 618 6.5 11 270 P6KE400A P6KE400CA 0.5 342 380 400 420 1 548 1.1 706 5.7 11 360 P6KE440A P6KE440CA 0.5 376 418 440 462 1 603 1.0 776 5.2 11 350 1. For bidirectional types having VRM 10V, IRM is multiplied by 2 2. Pulse test: tp < 50 ms. 3. VBR = T * (Tamb - 25) * VBR(25C). 4. VR = 0 V, F = 1 MHz. For bidirectional types, capacitance value is divided by 2. Doc ID 3068 Rev 7 3/9 Characteristics Figure 3. P6KE Peak power dissipation vs. initial junction temperature (printed circuit board) % Figure 4. Peak pulse power vs. exponential pulse duration. Ppp (W) 100 80 60 40 20 Tj initialo(C) 0 0 20 Figure 5. 40 60 80 100 120 140 160 180 200 Clamping voltage vs. peak pulse current(1) 0.001 Figure 6. VCL (V) % Ipp P6KE 440A 1 10 100 Capacitance vs. reverse applied voltage for unidirectional types (typical values). P6KE 220A 10000 Tj initial = 25o C 100 50 P 6K E 6 0 P6KE 100A tp tr t t r < 10 s 1000 P6KE 68A Tj = 25C o F= 1 MHz V8A P 6K E 1 5A P 6K E 6 8A P 6 KE 2 00A P6KE 39A P6KE 22A P6KE 12A 10 0.1 C (pF) 1000 100 0.01 100 P6KE 6V8A Exponential waveform: tp = 20s tp = 1ms tp = 10ms V R (V) Ipp (A) 1 0.1 1 10 100 1000 10 1 10 100 50 00 1. The curves in Figure 5 are specified for a junction temperature of 25C before surge. The given results may be extrapolated for other junction temperatures by using the following formula : VBR = T x [Tamb -25] x VBR(25C) For intermediate voltages, extrapolate the given results. Figure 7. Capacitance vs. reverse applied voltage for bidirectional types (typical values). Figure 8. C (pF) 10000 Tj = 25C o F= 1 MHz P6 KE 6V 8CA 1000 P6KE 15CA P6KE 68CA P6 KE2 00 C A 100 V R (V) 10 1 10 100 50 00 1. Multiply by 2 for units with VBR > 220 V. 4/9 Doc ID 3068 Rev 7 Peak forward voltage drop vs. peak forward current for unidirectional types (typical value).(1) P6KE Characteristics Figure 9. 100 Transient thermal impedance junction to ambient vs. pulse duration Figure 10. Relative variation of leakage current vs. junction temperature Zth (j-a) (C/W) Printed circuit board FR4, Llead = 10 mm 10 tp 1 0.01 0.1 1 10 100 1000 Doc ID 3068 Rev 7 5/9 Ordering information scheme 2 P6KE Ordering information scheme Figure 11. Ordering information scheme P6 KE 100 CA RL Peak Pulse Power P6 = 600 W Breakdown Voltage 100 = 100 V Types A = Unidirectional CA = Bidirectional Packaging Blank = Ammopack tape RL = Tape and reel 3 Package information Epoxy meets UL94, V0 Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 4. DO-15 dimensions Dimensions C C A Ref. D B 6/9 Doc ID 3068 Rev 7 Millimeters Inches Min. Max. Min. Max. A 6.05 6.75 0.238 0.266 B 2.95 3.53 0.116 0.139 C 26 31 1.024 1.220 D 0.71 0.88 0.028 0.035 P6KE Package information Table 5. Marking Unidirectional order code Marking(1) Bidirectional order code Marking(1) P6KE6V8A P6KE6V8A P6KE6V8CA P6KE6V8CA P6KE7V5A P6KE7V5A P6KE7V5CA P6KE7V5CA P6KE10A P6KE10A P6KE10CA P6KE10CA P6KE12A P6KE12A P6KE12CA P6KE12CA P6KE15A P6KE15A P6KE15CA P6KE15CA P6KE18A P6KE18A P6KE18CA P6KE18CA P6KE22A P6KE22A P6KE22CA P6KE22CA P6KE24A P6KE24A P6KE24CA P6KE24CA P6KE27A P6KE27A P6KE27CA P6KE27CA P6KE30A P6KE30A P6KE30CA P6KE30CA P6KE33A P6KE33A P6KE33CA P6KE33CA P6KE36A P6KE36A P6KE36CA P6KE36CA P6KE39A P6KE39A P6KE39CA P6KE39CA P6KE47A P6KE47A P6KE47CA P6KE47CA P6KE56A P6KE56A P6KE56CA P6KE56CA P6KE68A P6KE68A P6KE68CA P6KE68CA P6KE82A P6KE82A P6KE82CA P6KE82CA P6KE100A P6KE100A P6KE100CA P6KE100CA P6KE120A P6KE120A P6KE120CA P6KE120CA P6KE150A P6KE150A P6KE150CA P6KE150CA(2) P6KE180A P6KE180A P6KE180CA P6KE180CA P6KE200A P6KE200A P6KE200CA P6KE200CA P6KE220A P6KE220A P6KE220CA P6KE220CA P6KE250A P6KE250A P6KE250CA P6KE250CA P6KE300A P6KE300A P6KE300CA P6KE300CA P6KE350A P6KE350A P6KE350CA P6KE350CA P6KE400A P6KE400A(2) P6KE400CA P6KE400CA P6KE440A (2) P6KE440CA P6KE440CA P6KE440A 1. Includes a space character after P6KE for ECOPACK2 compliant devices 2. Includes a space character after P6KE for ECOPACK1 compliant devices in tape and reel packaging. Doc ID 3068 Rev 7 7/9 Ordering information 4 P6KE Ordering information Table 6. Ordering information Order code Marking(1) Package Weight See Table 5 DO-15 0.4 g P6KExxxx P6KExxxxRL Base qty Delivery mode 1000 Ammopack 6000 Tape and reel 1. Logo, date code, type code, cathode band (for unidirectional types only). 5 Revision history Table 7. 8/9 Document revision history Date Revision Feb-2003 4A Changes Last update Oct-2004 5 1/ Note 5, figure 7 on page 4, updated from VBR > 220V to VBR 200V. 2/ Types table on page 2: IPP (@10/1000s) changed for P6KE220xx to P6KE440xx 14-Sep-2011 6 Updated IRM @ VRM values, VBRmax @ IR for P6KE33 and order codes in Table 3. Updated footnotes to Table 5. Updated TL temperature in Table 1. 26-Apr-2012 7 Corrected typographical area Table 3. Doc ID 3068 Rev 7 P6KE Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 3068 Rev 7 9/9