SIMATIC Sensors RFID systems MOBY D / RF300 MDS D460 Compact Operating Instructions Characteristics MDS D460 Characteristics Field of application Identification in small assembly lines Memory FRAM 2048 bytes gross Read/write range See Chapter Field data (Page 2). Mounting on metal With spacer: High resistance Can also be used in a harsh industrial environment Standard Oriented according to ISO standard 15693 2000bytes net Recommended distance from metal 10 mm Ordering data Table 1 Ordering data of MDS D460 Order number MDS D460 6GT2600-4AB00 Spacer for MDS D160 / MDS D460 6GT2690-0AG00 Safety instructions for the device/system NOTICE This device/system may only be used for the application instances that have been described in the catalog and the technical documentation "MOBY D System Manual (http://support.automation.siemens.com/WW/view/en/13628689/0/en)" and only in combination with third-party devices and components recommended and/or approved by Siemens. (c) Siemens 2009, 2010 J31069-D0209-U001-A2-7618, 09/2010 1 Mounting on metal Field data Mounting option on metal with spacer Field data MOBY D-SLG Table 2 Field data MDS D460 - MOBY D-SLG SLG D10/D10 S ANT D5 SLG D11/D11 S ANT D2 SLG D11/D11 S ANT D5 SLG D12/D12 S Operating distance (Sa) 0...120 30...50 0...70 0...40 Limit distance (Sg) 160 60 100 60 Transmissi 300 on window (Lx/Ly) 50 280 100 / 60 Minimum distance from MDS to MDS 100 800 300 K h Transponder Metal Spacer 10 mm Figure 1 Mounting of the MDS D460 on metal with spacer Note If the minimum guide values (h) are not observed, a reduction of the field data results. In critical applications, it is recommended that a test is performed. 800 All values are in mm Field data RF300 reader Table 3 Field data MDS D460 - RF300 reader RF310R RF340R RF380R Operating distance (Sa) 2...20 2...35 2...65 Limit distance (Sg) 30 50 90 Transmission window (Lx/Ly) 30 50 110 / 70 Minimum distance from MDS to MDS 100 300 500 Flush-mounting Flush-mounting of the MDS D460 in metal is not permitted! All values are in mm 2 MDS D460 J31069-D0209-U001-A2-7618, 09/2010 Technical specifications Memory size 2048 bytes Memory configuration Serial number Configuration memory Application memory 8 bytes (fixed code) 40 bytes 2000 bytes Storage technology FRAM Memory organization steam jet: 150 mm; 10 to 15 l/min; 100 bar; 75 C The values for shock and vibration are maximum values and must not be applied continuously. 1) 2) Dimension drawings Dimensional drawing of MDS D460 2048 bytes gross 2000 bytes net Only for the RF300: When using the OPT area, 16 bytes of it must be subtracted in 8 byte blocks Protocol ISO 15693 Data retention (at +40 C) 10 years MTBF (at +40 C) 2 x 106 hours Bulk detection/multitag capability Yes Read cycles Unlimited Write cycles (at +40 C, typical) > 1010 Read/write distance (Sg) See Chapter Field data (Page 2) Distance from metal 10 mm (approx. 25% reduction of the field data) Power supply Inductive power transmission (without battery) Degree of protection to EN 60529 IP67 IPx9K 1) Dimensions in mm Shock, tested in accordance with IEC 68-227 50 g 2) Figure 3 Vibration, tested in 20 g 2) accordance with IEC 68-2-6 Torsion and bending load Not permissible Enclosure Color Material Dimensions (D x H) in mm Black Epoxy casting resin 16 (0.2) x 3.0 (0.2) MDS fixing Adhesion, spacer Ambient temperature During operation Transport and storage -25 C to +85 C permanent -40 C to +100 C Weight, approx. 3g s s Dimensions in mm Figure 2 Dimensional drawing of MDS D460 Dimensional drawing of spacer s s s 'LVWDQFHIURPPHWDO ,QVWDOODWLRQKHLJKW Dimensional drawing of spacer Service & support Technical support Phone: + 49 (0) 911 895 7222 Fax: + 49 (0) 911 895 7223 E-mail (mailto:support.automation@siemens.com) Internet: Online support request form: (http://www.siemens.com/automation/support-request) Service & support at IA/DT Support homepage (http://www.siemens.com/automation/service&support) RFID homepage For general information about our identification systems, visit RFID homepage (http://www.siemens.com/simatic-sensors/rf). Siemens AG Industry Sector Postfach 48 48 90026 NURNBERG MDS D460 J31069-D0209-U001-A2-7618, 09/2010 3