3MTM 4-Wall, Tripolarized Header .050" x .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series * Tripolarization to mating socket * 50 mil x 100 mil halves the connector length * Latch and eject for rugged high performance applications * Available for through hole or surfacemount attachment * High temperature plastic * Four-wall shroud provides contact protection * Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100 * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: February 10, 2009 TS-0253-E Sheet 1 of 7 Physical Insulation: Material: High Temperature Plastic (LCP) Flammability: UL 94V-0 Color: Black (RB Plating only) or Natural Contact: Material: Copper Alloy Plating: Underplating: 100 " [2.54 mm] Nickel Wiping Area: 30 " [0.76 mm] Gold Solder Tails: See Ordering Information Marking: 3M Logo, Part Number and Orientation Triangle Electrical Current Rating: 0.5 A Insulation Resistance: > 1 x 109 at 500 VDC Withstanding Voltage: 500 VRMS at Sea Level Environmental Temperature Rating: -55C to +105C Process Rating: Maximum 260C (Profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050" x .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle Table 1 Inch [Imm] C Tolerance Unless Noted Dimensions Contact Quantity A B C D Short (Ref.) D Long (Ref.) 020 1.060 [26.92] 0.722 [18.34] 0.500 [12.70] 1.671 [42.44] 1.842 [46.79] 026 1.210 [30.73] 0.872 [22.15] 0.650 [16.51] 1.821 [46.25] 1.992 [50.60] 036 1.460 [37.08] 1.122 [28.50] 0.900 [22.86] 2.071 [52.60] 2.242 [56.95] 040 1.560 [39.62] 1.222 [31.04] 1.000 [25.40] 2.171 [55.14] 2.342 [59.49] .015 X .015 [0.38] X [0.38] 050 1.810 [45.97] 1.472 [37.39] 1.250 [31.75] 2.421 [61.49] 2.592 [65.84] See Note 1 060 2.060 [52.32] 1.722 [43.74] 1.500 [38.10] 2.671 [67.84] 2.842 [72.19] 068 2.260 [57.40] 1.922 [48.82] 1.700 [43.18] 2.871 [72.92] 3.042 [77.27] 080 2.560 [65.02] 2.222 [56.44] 2.000 [50.80] 3.171 [80.54] 3.342 [84.89] 100 3.060 [77.72] 2.722 [69.14] 2.500 [63.50] 3.671 [93.24] 3.842 [97.59] Inch .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference Only A B C 2X .092 [2.34] Position 2 .310 [7.87] 810 Series Position 1 .100 Ref [2.54] .015 X .015 [0.38] X [0.38] Table 2 .050 Typ [1.27] PCB Thickness "F" Solder Tail Length .010 .062 [1.57] .090 [2.29] .094 [2.39] .112 [2.84] .125 [3.18] .143 [3.63] D Long Latch Short Latch .165 .010 [ 4.19 ] .440 .010 [11.18] 2X O.116 [2.95] .828 Ref [ 21.03 ] .620 Ref [ 15.75 ] .160 Ref [4.06] .265 [6.73] .405 [10.29] .306 Ref [7.77] .140 .010 [3.56] .015 [0.38] Position 1 Orientation Triangle "F" (See Table 2) Notes: 1. This polarization bump does not exist on the 20 position header. Notes: to be mated to the .050" X .100" Wiremount Socket 820 Series. 2. Recommended Ordering Information .105 [2.67] PTH Right Angle Header 81XXX - 5X0X03 - XX Ejector Latch Long 3505-28 (natural) 3505-28B (black) Short 3505-29 (natural) 3505-29B (black) Contact Quantity (See Table 1) Ejector/Latch System: 0 = None 5 = With Short Ejectors Installed 6 = With Long Ejector Latches Installed 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Plating suffix: blank = tin lead tails (RIA E3 & C2 apply) RB = matte tin tails (RIA E1 & C1 apply) Contact Tail: 2 = Solder Tail for .062 [ 1.57 ] PC Board 3 = Solder Tail for .094 [ 2.39 ] PC Board 4 = Solder Tail for .125 [ .318 ] PC Board TS-0253-E Sheet 2 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050" x .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle .050 .002 [1.27] O.024 .003 Typ [0.64] Table 3 Ejector Latches Dimension E Min None .575 [14.61] Long 1.010 [25.65] Short .885 [22.48] *Solder Thief Solder Pads (See Note 2) .100 .002 [2.54] 810 Series .045 - .060 [1.14] - [1.52] .025 - .035 [0.64] - [0.89] *Solder Thief Solder Pads required only on Solder side of PC Board. View A E C .002 .025 .002 [0.64] .050 .002 Typ [1.27] Tolerance Noncumulative .355 Max [9.02] .305 Min [7.75] Position 2 Flow Solder Direction View A Position 1 2X O .109 .002 [2.77] O.024 .003 Typ [0.64] .100 .002 [2.54] .160 .002 [4.06] Recommecded Mounting Hole Pattern PTH Right Angle Header (shown for mounting side of PC Baord) Notes: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC Board in order to help prevent solder bridging on the end solder tails. The solder thiefs are only required on the end of the rows which leave the solder bath last. 3. In order to facilitate soldering it is recommended that ejector latches be installed after the soldering process. 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ TS-0253-E Sheet 3 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050" x .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Table 1 Dimensions Contact Quantity A B C Short (Ref.) C Long (Ref.) D 020 1.060 [26.92] 0.722 [18.34] 1.671 [42.44] 1.842 [46.79] 0.860 [21.84] 026 1.210 [30.73] 0.872 [22.15] 1.821 [46.25] 1.992 [50.60] 1.010 [25.65] 036 1.460 [37.08] 1.122 [28.50] 2.071 [52.60] 2.242 [56.95] 1.260 [32.00] 040 1.560 [39.62] 1.222 [31.04] 2.171 [55.14] 2.342 [59.49] 1.360 [34.54] 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.592 [65.84] 1.610 [40.89] 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.842 [72.19] 1.860 [47.24] 068 2.260 [57.40] 1.922 [48.82] 2.871 [72.92] 3.042 [77.27] 2.060 [52.32] 080 2.560 [65.02] 2.222 [56.44] 3.171 [80.54] 3.342 [84.89] 2.360 [59.94] 100 3.060 [77.72] 2.722 [69.14] 3.671 [93.24] 3.842 [97.59] 2.860 [72.64] C A Table 5 B .310 [7.87] See Note 1 Position 2 PCB Thickness "F" Solder Tail Length .010 .062 [1.57] .092 [2.34] .094 [2.39] .110 [2.79] Position 1 .265 [6.73] .100 Ref [2.54] .015 X .015 [ 0.38 ] X [ 0.38 ] .050 Typ [1.27] .140 .010 .165 .010 .440 4.18 .100 [2.54] .010 "F" (See Table 2) 11.17 .828 Ref 21.03 .620 Ref 15.75 .405 10.29 2X .092 .015 2.34 .38 .015 X.015 [0.38 X 0.38] 2XO .116 2,95 Position 1 Orientation Triangle D Ordering Information Optional Press fit post mount alignment feature Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050" x .100" 820 Series Socket. PTH Straight Header 81XXX - 6X0X0X - XX Ejector Latch Long 3505-28 (natural) 3505-28B (black) Short 3505-29 (natural) 3505-29B (black) Contact Quantity (See Table 4) Board Mounting Options: 1 = None 3 = Press fit posts both ends Ejector/Latch System: 0 = None 5 = With Short Ejectors Installed 6 = With Long Ejector Latches Installed 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Plating suffix: blank = tin lead tails (RIA E3 & C2 apply) RB = matte tin tails (RIA E1 & C1 apply) Contact Tail: 2 = Solder Tail for .062 [ 1.57 ] PC Board 3 = Solder Tail for .094 [ 2.39 ] PC Board 4 = Solder Tail for .125 [ .318 ] PC Board TS-0253-E Sheet 4 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050" x .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle .050 .002 [1.27] .025 .003 [0.64] .100 .002 [2.54] Table 6 Ejector/Latches Dimension E (Min) None .215 [5.46] Long .650 [16.51] Short .525 [13.34] *Solder Thief Solder Pads (See Note2) .025 - .035 [0.64] - [0.89] 810 Series .045 - .060 [1.14] - [1.52] *Solder Thief Solder Pads required only on Solder side of PC Board. View A D .002 E .160 Min [4.06] 2X .205 .003 [5.21] .050 .003 [1.27] .050 .002 Typ [1.27] Tolerance Noncumulative .100 .002 [2.54] Flow Solder Direction VIEW A View A 2X .109 .002 [2.77] .225 Min [5.72] .100 .002 [2.54] .025 .003 Typ [0.64] Recommended Mounting Hole Pattern PTH Vertical Header Inch [Imm] (shown for mounting side of PC Board) Tolerance Unless Noted Inch Note: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC Board in order to help prevent solder bridging on the end solder tails. The Solder Thiefs are only required on the end of the rows which leave the solder bath last. 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference Only TS-0253-E Sheet 5 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050" x .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Table 7 C Short Latch Position 1 Orientation Triangle A B D Short (Ref.) D Long (Ref.) Tape & Reel Suffix 020 1.060 [26.92] 0.722 [18.34] 1.671 [42.44] 1.842 [46.79] WD 026 1.210 [30.73] 0.872 [22.15] 1.821 [46.25] 1.992 [50.60] 036 1.460 [37.08] 1.122 [28.50] 2.071 [52.60] 2.242 [56.95] 040 1.560 [39.62] 1.222 [31.04] 2.171 [55.14] 2.342 [59.49] 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.592 [65.84] 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.842 [72.19] 068 2.260 [57.40] 1.922 [48.82] 2.871 [72.92] 3.042 [77.27] 080 2.560 [65.02] 2.222 [56.44] 3.171 [80.54] 3.342 [84.89] 100 3.060 [77.72] 2.722 [69.14] 3.671 [93.24] 3.842 [97.59] WF WF WG WH D Long Latch .165 .010 [4.19] .440 .010 [11.18] .015 [0.38] Optional Single Press Fit Post Mount/Alignment Feature .130 [3.30] .828 Ref [21.03] .620 Ref [15.75] .092 [2.34] Dimensions Contact Quantity .265 [6.73] .405 [10.29] .346 .010 [8.79] .080 [2.03] Optional Metal Clip Retention .116 [2.95] Tolerance Unless Noted Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050" X .100" 820 Series Wiremount Socket. Ordering Information Contact Quantity (See Table 7) Ejector/Latch System: 0 = None 5 = With Short Ejectors Installed 6 = With Long Ejector Latches Installed 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Inch [Imm] Inch .00 .000 .01 .005 [ ] Dimensions for Reference Only SMT Straight Header 81XXX - 6X0C0X - XX - XX Board Mounting Options: 1 = None 4 = Press Fit Post Mount at Position 1 end 7 = Metal retention clips 8 = #1 end press fit post & metal retention clips .0 .1 Packaging Options: Blank = Trays WX = Tape & Reel Package (see table) Plating suffix: blank = tin lead tails (RIA E3 & C2 apply) RB = matte tin tails (RIA E1 & C1 apply) Ejector Latch Long 3505-28 (natural) 3505-28B (black) Short 3505-29 (natural) 3505-29B (black) TS-0253-E Sheet 6 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050" x .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Dimensions Ejector Latches .065 .002 Typ [1.65] H Min None .775 [19.69] Long 1.085 [27.56] Short 1.21 [30.73] .042 .003 Typ (Plated thru hole) [1.07] No. of Positions Dimensions F Typ, Full R Detail A Optional plated thru hole for metal clip retention G 20 .450 [11.43] N/A 26 .600 [15.24] .025 [0.64] 36 .850 [21.59] N/A 40 .950 [24.13] N/A 50 1.200 [30.48] .025 [.64] 60 1.450 [36.83] 0.000 68 1.650 [41.91] 0.000 80 1.950 [49.53] 0.000 100 2.450 [62.23] 0.000 C L F Optional Drilled Hole for Plastic Post .109 .002 [2.77] C L See Detail A .158 .002 [4.01] Position 2 .050 .002 Typ [1.27] Tolerance Noncumulative .029 .001 [0.74] 2X .075 .002 [1.905] C L G .220 .003 [5.59] .110 .002 [2.79] .376 [9.55] Position 1 C L H .280 [7.11] .205 .003 [5.21] Recommended Mounting Hole Pattern, SMT Straight Header (Shown for mounting side of PC Board) TS-0253-E Sheet 7 of 7 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-E Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-E Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2008. All rights reserved. RIA-2217A-E 3M is a trademark of 3M Company.