2.0x1.25mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: KPHCM-2012SGC-T SUPER BRIGHT GREEN Features Description z2.0X1.25mm zLOW SMT LED,0.5mm MAX.THICKNESS. POWER CONSUMPTION. zWIDE zIDEAL with Gallium Phosphide Green Light Emitting Diode. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS The Super Bright Green source color devices are made SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE4336 REV NO: V.3 DATE: JAN/10/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 1 OF 4 Selection Guide Dice Part No. KPHCM-2012SGC-T Iv (mcd) [2] @ 20mA Lens Type SUPER BRIGHT GREEN (GaP) WATER CLEAR Viewing Angle [1] Min. Typ. 2 1/2 10 25 110 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE4336 REV NO: V.3 DATE: JAN/10/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 2 OF 4 Super Bright Green KPHCM-2012SGC-T SPEC NO: DSAE4336 REV NO: V.3 DATE: JAN/10/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 3 OF 4 KPHCM-2012SGC-T Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAE4336 REV NO: V.3 DATE: JAN/10/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 4 OF 4