1N4001G - 1N4007G
GLASS PASSIVATED JUNCTION
BY133G SILICON RECTIFIERS
PRV : 50 - 1000 Volts
Io : 1.0 Ampere
FEATURES :
* Glass passivated chip
* High current capability
* High reliability
* Low reverse current
* Low forward voltage drop
MECHANICAL DATA :
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.34 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
°
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL 1N
4001G 1N
4002G 1N
4003G 1N
4004G 1N
4005G 1N
4006G 1N
4007G
BY
133G UNIT
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 1300 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 910 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 1300 V
Maximum Average Forward Current
0.375"(9.5mm) Lead Length Ta = 75 °C
Peak Forward Surge Current
8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method)
Maximum Forward Voltage at IF = 1.0 Amp. VF1.0 V
Maximum DC Reverse Current Ta = 25 °CIR5.0 µA
at rated DC Blocking Voltage Ta = 100 °CIR(H) 50 µA
Typical Junction Capacitance (Note1) CJ8pF
Typical Thermal Resistance (Note2) RθJA 45 °C/W
Junction Temperature Range TJ - 65 to + 175 °C
Storage Temperature Range TSTG - 65 to + 175 °C
Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC
(2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted.
Page 1 of 2 Rev. 02 : March 25, 2005
A
A
RATING
IF(AV) 1.0
IFSM 30
DO - 41
Dimensions in inches and ( millimeters )
1.00 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
0.205 (5.2)
0.161 (4.1)
1.00 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
* Pb / RoHS Free
IATF 0113686
SGS TH07/1033
TH09/2479
TH97/2478
www.eicsemi.com
RATING AND CHARACTERISTIC CURVES ( 1N4001G - BY133G )
FIG.1 - DERATING CURVE FOR OUTPUT FIG.2 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
FORWARD VOLTAGE, VOLTS
Page 2 of 2 Rev. 02 : March 25, 2005
0.8
0.6
0.4
0.2
1.0
10
1.0
24
0
30
0
18
12
6
1.0
80
0.1
0.01
10
0.1
100 140
0 20 40 60 120
PERCENT OF RATED REVERSE
VOLTAGE, (%)
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
FORWARD CURRENT, AMPERES
REVERSE CURRENT, MICROAMPERES
Ta = 25 °C
Ta = 100 °C
TJ = 25 °C
Ta = 25 °C
Pulse Width = 300 µs
2% Duty Cycle
0.01
IATF 0113686
SGS TH07/1033
TH09/2479
TH97/2478
www.eicsemi.com
