High Speed Transistor Optocouplers Single Channel: HCPL0453, HCPL0500, HCPL0501 Dual Channel: HCPL0531, HCPL0534 www.onsemi.com HCPL0453, HCPL0500, HCPL0501, HCPL0531, HCPL0534 Description The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photo-detector transistor housed in a compact 8-pin small outline package. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL04XX devices do not have the base bonded out to a lead for additional noise margin. The HCPL053X devices have two channels per package for optimum mounting density. SOIC8 CASE 751DZ MARKING DIAGRAM 1 ON V Features * High Speed - 1 MBit/s * 15 kV/s Minimum Commone Mode Transient Immunity at * * * * * VCM = 1500 V (HCPL0453/0534) Open Collector Output Guaranteed Performance Over Temperature: 0C to 70C U.L. Recognized (File # E90700) VDE0884 Recognized (File # 136616) Approval Pending for HCPL0531/0453 Ordering Option V, e.g., HCPL0500V BSI Recognized (File # 8661, 8662) HCPL0500/0501 only 3 1. 2. 3. ON 500 V 4. 5. X YY 6. S X 4 500 YY S 2 6 5 = ON Semiconductor Logo = Device Number = VDE mark indicates DIN EN/IEC60747-5-5 approval (Note: Only appears on parts ordered with VDE option - See Ordering Information Table) = One-Digit Year Code, e.g. `3' = Two Digit Work Week Ranging from `01' to `53' = Assembly Package Code Applications * * * * Line Receivers Pulse Transformer Replacement Output Interface to CMOS-LSTTL-TTL Wide Bandwidth Analog Coupling ORDERING INFORMATION See detailed ordering and shipping information on page 7 of this data sheet. TRUTH TABLE (Positive Logic) LED VO ON LOW OFF HIGH (c) Semiconductor Components Industries, LLC, 2020 August, 2020 - Rev. 1 1 Publication Order Number: HCPL0534/D HCPL0453, HCPL0500, HCPL0501, HCPL0531, HCPL0534 SCHEMATICS N/C 1 + 1 8 VCC 8 VCC VF1 _ 7 VB* + 2 2 7 V01 3 6 V02 VF _ _ 6 VO 3 VF2 N/C 4 5 GND + 4 Figure 1. Single-channel Circuit Schematics (HCPL0500, HCPL0501 *Base Not Connected for HCPL0453) 5 GND Figure 2. Dual-channel Circuit Schematics (HCPL0531, HCPL0534) ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise specified) Symbol Parameter Value Units TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +85 C 25 mA Reflow Temperature Profile (Refer to page 7) EMITTER IF (avg) DC/Average Forward Input Current IF (pk) Peak Forward Input Current (50% duty cycle, 1 ms P.W.) 50 mA Peak Transient Input Current (t 1 s P.W., 300 pps) 1.0 A VR Reverse Input Voltage 5.0 V PD Input Power Dissipation 45 mW IO (avg) Average Output Current (Pin 6) 8 mA IO (pk) Peak Output Current 16 mA VEBR Emitter-Base Reverse Voltage (HCPL0500/0501 only) 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage -0.5 to 20 V IB Base Current (HCPL0500/0501 only) PD Output Power Dissipation IF (trans) DETECTOR 5 mA 100 mW Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. www.onsemi.com 2 HCPL0453, HCPL0500, HCPL0501, HCPL0531, HCPL0534 ELECTRICAL CHARACTERISTICS (TA = 0C to 70C unless otherwise specified) INDIVIDUAL COMPONENT CHARACTERISTICS Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.45 1.7 V EMITTER VF Input Forward Voltage All IF = 16 mA, TA = 25C IF = 16 mA 1.8 BVR Input Reverse Breakdown Voltage IR = 10 A All VF / TA Temperature Coefficient of Forward Voltage IF = 16 mA All -1.6 Logic High Output Current IF = 0 mA, VO = VCC = 5.5 V, TA = 25C All 0.001 0.5 IF = 0 mA, VO = VCC = 15 V, TA = 25C All 0.005 1 IF = 0 mA, VO = VCC = 15 V All 5.0 V mV/C DETECTOR IOH ICCL ICCH Logic Low Supply Current Logic High Supply Current IF = 16 mA, VO = Open, VCC = 15 V A 50 120 HCPL0453/ 0500/1 200 A 400 HCPL0531/4 IF = 0 mA, VO = Open, VCC = 15 V, TA = 25C All 0.01 1 IF = 0 mA, VO = Open, VCC = 15 V HCPL0453/ 0500/1 2 HCPL0531/4 4 A TRANSFER CHARACTERISTICS Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit HCPL0500 7 27 50 % HCPL0453 19 27 50 HCPL0500 5 30 HCPL0453 15 30 COUPLED CTR Current Transfer Ratio (Note 1) IF = 16 mA, VO = 0.4 V, VCC = 4.5 V, TA = 25C HCPL0501/0531 IF = 16 mA, VO = 0.5 V, VCC = 4.5 V HCPL0501/0534 VOL Logic Low Output Voltage IF = 16 mA, IO = 1.1 mA, VCC = 4.5 V, TA = 25C HCPL0500 0.18 0.4 IF = 16 mA, IO = 3 mA, VCC = 4.5 V, TA = 25C HCPL0453 0.25 0.4 HCPL0501/0531/4 IF = 16 mA, IO = 0.8 mA, VCC = 4.5 V HCPL0500 0.13 0.5 IF = 16 mA, IO = 2.4 mA, VCC = 4.5 V HCPL0453 0.23 0.5 HCPL0501/0531/4 *All typicals at TA = 25C www.onsemi.com 3 V HCPL0453, HCPL0500, HCPL0501, HCPL0531, HCPL0534 ELECTRICAL CHARACTERISTICS (CONTINUED) (TA = 0C to 70C unless otherwise specified) SWITCHING CHARACTERISTICS (TVCC = 5 V) Symbol TPHL Parameter Test Conditions Device Propagation Delay TA = 25C, RL = 4.1 k, IF = 16 mA Time to Logic LOW (Note 2) (Fig. 9) RL = 1.9 k, IF = 16 mA, TA = 25C (Note 3) (Fig. 9) TPLH Max. Unit HCPL0500 0.45 1.5 s HCPL0453 0.45 0.8 RL = 4.1 k, IF = 16 mA (Note 2) (Fig. 9) HCPL0500 2.0 RL = 1.9 k, IF = 16 mA (Note 3) (Fig. 9) HCPL0453 1.0 HCPL0501/0531/4 Propagation Delay TA = 25C, RL = 4.1 k, IF = 16 mA (Note 2) (Fig. 9) Time to Logic HIGH RL = 1.9 k, IF = 16 mA, TA = 25C (Note 3) (Fig. 9) HCPL0500 0.5 1.5 HCPL0453 0.3 0.8 s HCPL0501/0531/4 RL = 1.9 k, IF = 16 mA (Note 3) (Fig. 9) HCPL0500 2.0 HCPL0453 1.0 HCPL0501/0531/4 IF = 0 mA, VCM = 10 VP-P, RL = 4.1 k, Common Mode Transient Immunity TA = 25C (Note 4) (Fig. 10) at Logic HIGH IF = 0 mA, VCM = 10 VP-P, RL = 1.9 k TA = 25C (Note 4) (Fig. 10) IF = 0 mA, VCM = 1500 VP-P, RL = 1.9 k, TA = 25C (Note 4) (Fig. 10) |CML| Typ.* HCPL0501/0531/4 RL = 4.1 k, IF = 16 mA (Note 2) (Fig. 9) |CMH| Min. IF = 16 mA, VCM = 10 VP-P, RL = 4.1 k, Common Mode Transient Immunity TA = 25C (Note 4) (Fig. 10) at Logic LOW IF = 16 mA, VCM = 10 VP-P, RL = 1.9 k (Note 4) (Fig. 10) IF = 16 mA, TA = 25C, VCM = 1500 VP-P, RL = 1.9 k (Note 4) (Fig. 10) HCPL0500 1,000 10,000 HCPL0501/31 1,000 10,000 HCPL0534 15,000 40,000 HCPL0453 15,000 40,000 HCPL0500 1,000 10,000 HCPL0501/31 1,000 10,000 HCPL0534 15,000 40,000 HCPL0453 15,000 40,000 V/s V/s ISOLATION CHARACTERISTICS Symbol Characteristics Test Conditions Min. VISO Input-Output Isolation Voltage f = 60 Hz, t = 1.0 min., II-O 2 A (Notes 5, 6) 2500 RISO Isolation Resistance VI-O = 500V (Note 5) 1011 CISO Isolation Capacitance VI-O = 0 V, f = 1.0MHz (Note 5) Typ.* Max. Unit VacRMS 0.2 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. *All typicals at TA = 25C 1. Current Transfer Ratio is designed as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 2. The 4.1 k load represents 1 LSTTL unit load of 0.36 mA and 6.1 k pull-up resistor. 3. The 1.9 k load represents 1 TTL unit load of 1.6 mA and 5.6 k pull-up resistor. 4. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8 V). 5. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 6. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration. www.onsemi.com 4 HCPL0453, HCPL0500, HCPL0501, HCPL0531, HCPL0534 1.2 1.2 1.0 1.0 NORMALIZED CTR NORMALIZED CTR TYPICAL PERFORMANCE CURVES 0.8 0.6 0.4 VO = 0.4 V VCC = 5 V T A = 25_C Normalized to: IF = 16 mA 0.2 0.0 0.1 1 0.8 0.6 0.4 Normalized to: TA = 25_C 0.2 10 0.0 -60 100 -40 -20 Figure 3. Normalized CTR vs. Forward Current IOH - LOGIC HIGH OUTPUT CURRENT (nA) IO - OUTPUT CURRENT (mA) IF = 40 mA IF = 35 mA 12 IF = 30 mA 10 IF = 25 mA 8 IF = 20 mA 6 IF = 15 mA 4 IF = 10 mA 2 IF = 5 mA 0 0 2 4 6 8 10 12 14 16 18 20 60 100 IF = 0 mA VCC = 5 V VO = 5 V 100 10 1 0.1 -60 -40 -20 0 20 40 60 80 100 Figure 6. Logic High Output Current vs. Temperature 800 10000 700 TP - PROPAGATION DELAY (ns) RL = 4.1 K (TPLH) RL = 4.1 K (TPHL) 500 400 300 200 RL = 1.9 K (TPHL) IF = 16 mA VCC = 5 V RL = 1.9 K (TPLH) 100 IF - 16 mA (TPHL) IF - 10 mA (TPHL) 1000 IF - 16 mA (TPLH) IF - 10 mA (TPLH) 0 -60 80 TA - TEMPERATURE (_C) Figure 5. Output Current vs. Output Voltage Tp - PROPAGATION DELAY (ns) 40 1000 VO - OUTPUT VOLTAGE (V) 600 20 Figure 4. Normalized CTR vs. Temperature 16 14 0 TA - TEMPERATURE (_C) IF - FORWARD CURRENT (mA) TA = 25_C VCC = 5 V IF = 16 mA VCC = 5 V VO = 0.4 V VCC = 5 V TA = 25_C 100 -40 -20 0 20 40 60 80 100 1 10 RL = LOAD RESISTANCE (k ) TA - TEMPERATURE (_C) Figure 7. Propagation Delay vs. Temperature Figure 8. Propagation Delay vs. Load Resistance www.onsemi.com 5 HCPL0453, HCPL0500, HCPL0501, HCPL0531, HCPL0534 Noise Shield 1 Pulse Generator tr = 5ns Z O= 50 10% D.C. I/f < 100ms IF 8 + 2 7 VF - 3 6 4 5 VCC Pulse Generator tr = 5ns Z O = 50 +5 V VB VO 1 - IF MONITOR 0.1 mF 8 Test Circuit for HCPL0453, HCPL0500 and HCPL0501 +5 V RL 7 2 3 6 4 5 VF2 + Rm C L = 1.5 mF VCC V01 VO C L = 1.5 mF VO GND Noise Shield + VF1 - 10% DUTY CYCLE I/f < 100mS RL I F Monitor Rm IF V02 0.1 mF GND Test Circuit for HCPL0531 and HCPL0534 IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Figure 9. Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC Noise Shield + +5 V 1 IF VB VF1 - RL 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 4 5 VO VFF 0.1 mF VFF +- GND - B VO VF2 + - V02 0.1 mF GND VCM VCM +- Pulse Gen Pulse Gen Test Circuit for HCPL0453, HCPL0500 and HCPL0501 VCM 10 V 0V Test Circuit for HCPL0531 and HCPL0534 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Figure 10. Common Mode Immunity Test Circuit www.onsemi.com 6 HCPL0453, HCPL0500, HCPL0501, HCPL0531, HCPL0534 ORDERING INFORMATION Part Nr./ Option (Note 7) Packing Method Order Entry Identifier Package Description V SOIC8 VDE 0884 (approval pending for HCPL0531 & HCPL0534) R2 SOIC8 R2V SOIC8 HCPL0xxxV HCPL0xxxR2 HCPL0xxxR2V Tube (3000 Units) Tape and Reel (2500 Units) VDE 0884 (approval pending for HCPL0531 & HCPL0534) Tape and Reel (2500 Units) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 7. The product orderable part number system listed in this table also applies to the HCPL0453, HCPL0500, HCPL0501, HCPL0531 and HCPL0534 product. REFLOW PROFILE 260 240 220 200 TP Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP TL Tsmax 180 Temperature (5C) 160 Preheat Area Tsmin 140 EEEEEE EEEEEE EEEEEE tL ts 120 100 80 60 40 20 0 240 120 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature 8 minutes max. www.onsemi.com 7 360 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOIC8 CASE 751DZ ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13733G SOIC8 DATE 30 SEP 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative