NJL7502L Ambient Light Sensor GENERAL DESCRIPTION The NJL7502L is the photo transistor which spectral response is similar to human eye. FEATURES 1. Peak wavelength 560 nm 2. Photo current 33 A typ. Condition : White LED, 100Lux 3. Lead pin package APPLICATIONS Room light, Toy, TV, PDP, Clock, Refrigerator, etc. to adjust the luminance of display to control ON/OFF Replacement of CdS ABSOLUTE MAXIMUM RATINGS (Ta=25C) PARAMETER Collector - Emitter Voltage Emitter - Collector Voltage Photocurrent Power Dissipation Operating Temperature Storage Temperature Soldering Temperature SYMBOL VCEO VECO I PD Topr Tstg Tsol RATINGS 70 10 10 150 -40 to +85 -40 to +100 260 ELECTRO-OPTICAL CHARACTERISTICS UNIT V V mA mW C C C SYMBOL (Ta=25C) TEST CONDITION Photocurrent 1 IL1 Photocurrent 2 Dark Current Peak Wavelength Collector - Emitter Saturation Current Emitter - Collector Voltage Half Angle Rise Time Fall Time IL2 ID P PARAMETER Ver.2013-08-07 ICE(sat) ECL 1/2 tr tf MIN TYP VCE=5V, Light source A, 100Lux 46 A VCE=5V, White LED, 100Lux VCE=20V 15 10 9 33 560 20 10 10 73 0.1 A A nm A V deg. s s VCE=0.24V, White LED, 100Lux IECL=1A , White LED, 100Lux VCE=5V, IC=1mA, RL=100 VCE=5V, IC=1mA, RL=100 MAX UNIT -1- NJL7502L TEST CIRCUIT Photocurrent 1 IL1 VCE = 5V Collector - Emitter Saturation Current VCE = 0.24V ICE (sat) IL1 100Lux 100Lux Light source A White LED Half Angle Photocurrent 2 IL2 ICE(sat) 1/2 V = 5V RCE L = 100 VCE = 5V IL IL2 100Lux White LED Dark Current Rise Time Fall Time ICEO tr tf VCE = 20V VCE = 5V ID IL = 1mA 0Lux Vout RL = 100 Peak Wavelength 100mV 90% P VCE = 5V OV 10% IL tr tf Light -2- Ver.2013-08-07 NJL7502L OUTLINE (TYP.) TYPICAL CHARACTERISTICS Power Dissipation vs. Temperature 200 Power Dissipation P(mW) 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 Ambient Temperature Ta(C) Ver.2013-08-07 -3- NJL7502L Spectral Response (Ta=25C) Directivity Relative Response (%) 120 20 0 10 10 20 30 100 30 40 80 40 50 60 50 60 40 60 70 70 20 80 80 0 300 400 500 600 700 800 900 1000 90 100% 1100 80% 60% 40% 0% 20% 20% 40% 60% 80% 90 100% Wavelength (nm) NJL7502L Human eye Photocurrent vs. Illuminance (Ta=25C) Photo Current vs. Corrector-Emitter Voltage (Ta=25C) 10000 1.0E-02 Ev=10000Lx Photo C urrent (A) Photocurrent (A) 1000 100 10 1.0E-03 Ev=1000Lx Ev=500Lx 1.0E-04 Ev=100Lx 1 0.1 1.0E-05 1 10 100 1000 Illuminance (Lux) 10000 Light Source A 6 8 10 1.0E+00 Light source A Dark Current Iceo (A) Relative Photocurrent (%) 4 Corrector-Emitter Voltage (V) Dark Current vs. Temperature Vce=5.0V 150 130 120 White LED 110 100 90 80 70 60 1.0E-01 1.0E-02 1.0E-03 1.0E-04 1.0E-05 1.0E-06 1.0E-07 1.0E-08 50 -40 -20 0 20 40 60 Ambient Temperature (C) -4- 2 White LED Photocurrent vs Temperature Vce=5.0V 140 0 100000 80 100 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (C) Ver.2013-08-07 NJL7502L Vce Light NJL7502L Vout RL Fig1 Application Circuit NJL7502L White LED Vce=5.0V 10 Vout(V) 1 0.1 500 0.01 1k 10k RL 100k 0.001 1M 0.0001 1 10 100 1000 10000 100000 Ev(Lx) NJL7502L Light Source A Vce=5.0V 10 Vout(V) 1 0.1 500 0.01 1k RL 10k 100k 0.001 1M 0.0001 1 10 100 1000 10000 100000 Ev(Lx) Ver.2013-08-07 -5- NJL7502L PACKING SPECIFICATION PHOTO TRANSISTOR PACKING SPECIFICATION UNIT VINYL BAG SPECIFICATION Label Device No., Quantity, Lot No. Material: Antistatic vinyl Sealing: Heat seal Contents: 1000pcs 1000pcs/ /bag bag OUTER PACKING SPECIFICATION Cardboard Contents: MAX 5 bag /Box Label Box size: 180x300x137 -6- Device No., Quantity, Lot No. Ver.2013-08-07 NJL7502L MOUNTING METHOD NOTE Mounting was evaluated with the following profiles in our company, so there was no problem. However, confirm mounting by the condition of your company beforehand. Mounting: Twice soldering is allowed. REFLOW SOLDERING METHOD *Reflow soldering is not possible. FLOW SOLDERING METHOD * Flow soldering is not possible. IRON SOLDERING METHOD * Recommended Iron Soldering conditions Temperature of Iron 350C or less Soldering time within 3s (At a lead) Soldering Position At least 4mm away from body. (Prevent the temperature rise of the body.) (Note1) Do not apply load to body and lead when soldering. (Note2) Do not heat the whole body when soldering. CLEANING CONDITIONS (1) Please refrain from cleaning of the device as much as possible. A void the solvent or the vapor solvent from the resin of the device even during the mounting and using. (2) This device can be cleaned if it is only a lead part when the cleaning of flux etc is indispensable. How ever, clean the device by using the following solvent by the condition within 35C and 3minute. Solvent : isopropyl alcohol, methyl alcohol Ver.2013-08-07 -7- NJL7502L IC STORAGE CONDITION AND ITS DURATION (1) Temperature and humidity ranges. Temperature: 5 to 40 (C) Humidity : 30 to 75 (%) Normally a package product does not have a quality problem such as package crack because of absorbing humidity. However, the above stated conditions are recommended for storage. Please note that an electrostatic discharge is apt to destroy the product under the dried environment below 30%. It is also recommended to store the products avoiding the place where it creates dew with the products due to a sudden change in temperature. (2) Please do not expose the products in the corrosive atmosphere. (3) Please store the products in dust free place. (4) Please do not expose the products to a direct sun light. (5) Please store the IC without adding a load. (6) No need to worry about baking under above storage terms. (7) The leads are silver plated and they are discolored if the device is left open to the air for long after taken out of the envelop. It causes deterioration of soldering characteristics. Mount the device as short as possible after opening the envelope. STORAGE DURATION Please store the products less than one year after opening the envelop is made. For the products which storage duration are longer than one year, please check the solderability and if the leads are rusty before they are used. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -8- Ver.2013-08-07 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: NJR: NJL7502L NJL7502R-TE1 NJL7502K