HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Features * RF Bandwidth: 1310-1415, 2620-2830, 5240-5660 MHz * 24-bit Step Size, Resolution 3 Hz typ * Ultra Low Phase Noise -110 dBc/Hz in Band Typ. * Built in Digital Self Test * Figure of Merit (FOM) -227 dBc/Hz * Exact Frequency Mode * 40 Lead 6x6 mm SMT Package: 36 mm2 * <180 fs RMS Jitter Typical Applications PLLS WITH INTEGRATED VCO - SMT 7 7-1 * Cellular/4G Infrastructure * Phased Array Applications * Repeaters and Femtocells * DDS Replacement * Communications Test Equipment * Very High Data Rate Radios * CATV Equipment Functional Diagram Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to placeChelmsford, orders: Analog MA Devices, Inc., For price,isdelivery, andDevices to place orders: Microwave Corporation,20 Alpha 01824 responsibility assumed by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone:or 978-250-3343 Fax: On-line at www.hittite.com Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication otherwise under any patent or patent978-250-3373 rights of Analog Devices. Order Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz General Description The HMC840LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) Frequency Synthesizer with an Integrated Voltage Controlled Oscillator (VCO). The synthesizer consists of an integrated low noise VCO with a triband output, an autocalibration subsystem for low voltage VCO tuning, a very low noise digital Phase Detector (PD), a precision controlled charge pump, a low noise reference path divider and a fractional divider. The fractional synthesizer features an advanced delta-sigma modulator design that allows both ultra-fine step sizes and low spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency hopping and low micro-phonics. Electrical Specifications VPPCP, VDDCP, VCC1, VCC2 = 5V; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS = 3.3V GNDCP = GNDLS = Ground Paddle = 0V, Min and Max Specified across Temp Parameter Condition Min. Typ. Max. Units RF Output Characteristics VCO Frequency at PLL Input 2620 2830 MHz RF Output Frequency at f VCO/2 1310 1415 MHz RF Output Frequency at f VCO 2620 2830 MHz RF Output Frequency at 2f VCO 5240 5660 MHz dBm Output Power RF Output Power at f VCO/2 RF Output Power at f VCO matched at the frequency of interest, vs temperature RF Output Power at 2f VCO 8.5 10 11.5 7 9 11 dBm -5.5 -3 0.5 dBm 10.5 12.6 15.6 MHz/V VCO Tuning Sensitivity Measured at fo, 2V VCO Supply Pushing Measured at fo, 2V 1.5 MHz/V RF Output Fout/2 Harmonic Doubler Mode -26 dBc RF Output 3Fout/2 Harmonic Doubler Mode -27 dBc Harmonics RF Output 2nd Harmonic RF Output 5 Fout/2 Harmonic RF Output 3rd Harmonic RF Output 7 Fout/2 Harmonic RF Output 4th Harmonic fo/2/fo/2fo -19 / -20 / -25 dBc Doubler Mode -41 dBc fo/2/fo/2fo -26 / -34 / -42 dBc Doubler Mode -66 dBc fo/2/fo/2fo -28 / -48 / -61 dBc RF Divider Characteristics 19-Bit N-Divider Range (Integer) 19-Bit N-Divider Range (Fractional) Max = 219 - 1 524,287 Fractional nominal divide ratio varies (-3 / +4) dynamically max 524,283 7 PLLS WITH INTEGRATED VCO - SMT For theory of operation and register map refer to the "PLLs with Integrated VCOs - RF VCOs Operating Guide". To view the Operating Guide, please visit www.hittite.com and choose HMC840LP6CE from the "Search by Part Number" pull down menu. REF Input Characteristics Max Ref Input Frequency Ref Input Range AC Coupled 1 Ref Input Capacitance 14-Bit R-Divider Range 1 50 200 MHz 2 3.3 Vp-p 5 pF 16,383 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to placeChelmsford, orders: Analog MA Devices, Inc., For price,isdelivery, andDevices to place orders: Microwave Corporation,20 Alpha 01824 responsibility assumed by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone:or 978-250-3343 Fax: On-line at *www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication otherwise under any patent or patent 978-250-3373 rights of Analog Devices. Order Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com 7-2 HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Electrical Specifications (Continued) Parameter Condition Min. [1] Typ. Max. Units Phase Detector (PD) PD Frequency Fractional Feedback Mode 0.1 100 MHz PD Frequency Fractional Feedforward Mode (and Register 6 [17:16] = 10) 0.1 80 MHz PD Frequency Integer Mode 0.1 125 MHz 2.54 mA Charge Pump Output Current 0.02 Charge Pump Gain Step Size PD/Charge Pump SSB Phase Noise PLLS WITH INTEGRATED VCO - SMT 7 20 A 50 MHz Ref, Input Referred 1 kHz -143 dBc/Hz 10 kHz Add 1 dB for Fractional -150 dBc/Hz 100 kHz Add 3 dB for Fractional -153 dBc/Hz Logic Inputs VIH Input High Voltage DVDD3V-0.4 DVDD3V V VIL Input Low Voltage 0 0.4 V VOH Output High Voltage DVDD3V-0.4 DVDD3V V VOL Output Low Voltage 0 0.4 V 3.5 V Logic Outputs Power Supply Voltages Analog 3.3V Supplies Digital Supply Analog 5V Supplies AVDD, VCCHF, VCCPS, VCCPD, RVDD 3.0 3.3 DVDD3V 3.0 3.3 3.5 V VPPCP, VDDCP, VCC1, VCC2 4.8 5 5.2 V Power Supply Currents VPPCP, VDDCP 5.3 mA +5V VCO Core and PLL Buffer +5V Analog Charge Pump VCC2 56 mA +5V VCO Divider and RF Buffer VCC1 36 mA AVDD, VCCHF, VCCPS, VCCPD, RVDD 41 mA +3.3V Analog +3.3V Digital Power Down - Crystal Off Power Down - Crystal On, 100 MHz DVDD3V 6.5 mA Reg 01h=0, Crystal Not Clocked 10 A Reg 01h=0, Crystal Clocked 100 MHz 10 200 A Power on Reset Typical Reset Voltage on DVDD Min DVDD Voltage for No Reset Power on Reset Delay 700 mV 250 s 1.5 V VCO Open Loop Phase Noise at fo/2 10 kHz Offset -88 dBc/Hz 100 kHz Offset -117 dBc/Hz 1 MHz Offset -145 dBc/Hz [1] This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback mode, the maximum PFD rate = fvco/20 or 100 MHz, whichever is less. 7-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to place Chelmsford, orders: Analog Devices, Inc., For price,is assumed delivery, andDevices to place orders: Microwave Corporation,20 Alpha MA 01824 responsibility by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Order781-329-4700 On-line at *www.hittite.com Phone: Order online at www.analog.com license is granted by implication or otherwise under any patent orFax: patent 978-250-3373 rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Electrical Specifications (Continued) Parameter Condition Min. Typ. Max. Units 10 MHz Offset -162 dBc/Hz 100 MHz Offset -165 dBc/Hz dBc/Hz VCO Open Loop Phase Noise at fo 10 kHz Offset -82 100 kHz Offset -111 dBc/Hz 1 MHz Offset -139 dBc/Hz 10 MHz Offset -158 dBc/Hz 100 MHz Offset -171 dBc/Hz VCO Open Loop Phase Noise at 2fo -76 dBc/Hz -105 dBc/Hz 1 MHz Offset -133 dBc/Hz 10 MHz Offset -152 dBc/Hz -158 dBc/Hz dBc/Hz 100 MHz Offset Closed Loop Phase Noise PLL + VCO at fvco with 100 KHz BW Loop Filter Design[3] Integer, 100 MHz PD 1 kHz Offset -112 Integer, 100 MHz PD 10 kHz Offset -110 dBc/Hz Integer, 100 MHz PD 100 kHz Offset -111 dBc/Hz Integer, 100 MHz PD 1 MHz Offset -139 dBc/Hz Integer, 100 MHz PD 10 MHz Offset -161 dBc/Hz Integer, 100 MHz PD 100 MHz Offset -171 dBc/Hz -56.5 dBc Integrated Phase Noise RMS Jitter Fractional, 100 MHz PD from 10KHz to 100MHz 1 kHz Offset 129.5 fsec -111 dBc/Hz Fractional, 100 MHz PD 10 kHz Offset -110 dBc/Hz Fractional, 100 MHz PD 100 kHz Offset -110 dBc/Hz Fractional, 100 MHz PD 1 MHz Offset -139 dBc/Hz Fractional, 100 MHz PD 10 MHz Offset -160 dBc/Hz Fractional, 100 MHz PD 100 MHz Offset Integrated Phase Noise RMS Jitter from 10KHz to 100MHz -171 dBc/Hz -56.8 dBc 123.8 fsec Closed Loop Phase Noise PLL + VCO at fvco with 178 KHz BW Loop Filter Design[4] Integer, 100 MHz PD 1 kHz Offset -113 dBc/Hz Integer, 100 MHz PD 10 kHz Offset -118 dBc/Hz Integer, 100 MHz PD 100 kHz Offset -112 dBc/Hz Integer, 100 MHz PD 1 MHz Offset -138 dBc/Hz Integer, 100 MHz PD 10 MHz Offset -160 dBc/Hz Integer, 100 MHz PD 100 MHz Offset -171 dBc/Hz Integrated Phase Noise RMS Jitter from 10KHz to 100MHz -59.7 dBc 89 fsec Fractional, 100 MHz PD 1 kHz Offset -111 dBc/Hz Fractional, 100 MHz PD 10 kHz Offset -115 dBc/Hz Fractional, 100 MHz PD 100 kHz Offset -109 dBc/Hz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to placeChelmsford, orders: Analog MA Devices, Inc., For price,isdelivery, andDevices to place orders: Microwave Corporation,20 Alpha 01824 responsibility assumed by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone:or 978-250-3343 Fax: On-line at *www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication otherwise under any patent or patent 978-250-3373 rights of Analog Devices. Order Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com 7 PLLS WITH INTEGRATED VCO - SMT 10 kHz Offset 100 kHz Offset 7-4 HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Electrical Specifications (Continued) Parameter Fractional, 100 MHz PD Condition Min. Typ. Max. Units 1 MHz Offset -138 dBc/Hz Fractional, 100 MHz PD 10 MHz Offset -160 dBc/Hz Fractional, 100 MHz PD 100 MHz Offset -171 dBc/Hz Integrated Phase Noise RMS Jitter from 10KHz to 100MHz -58 dBc 108.7 fsec -110 dBc/Hz Closed Loop Phase Noise PLL + VCO at fvco with 71 KHz Loop Filter Design [5] Integer, 50 MHz PD 7 1 kHz Offset Integer, 50 MHz PD 10 kHz Offse -105 dBc/Hz Integer, 50 MHz PD 100 kHz Offset -109 dBc/Hz Integer, 50 MHz PD 1 MHz Offset -139 dBc/Hz Integer, 50 MHz PD 10 MHz Offset -160 dBc/Hz Integer, 50 MHz PD 100 MHz Offset -171 dBc/Hz PLLS WITH INTEGRATED VCO - SMT Integrated Phase Noise RMS Jitter from 10KHz to 100MHz dBc fsec Fractional, 50 MHz PD 1 kHz Offset -108 dBc/Hz Fractional, 50 MHz PD 10 kHz Offset -104 dBc/Hz Fractional, 50 MHz PD 100 kHz Offset -109 dBc/Hz Fractional, 50 MHz PD 1 MHz Offset -139 dBc/Hz Fractional, 50 MHz PD 10 MHz Offset -160 dBc/Hz Fractional, 50 MHz PD 100 MHz Offset -171 dBc/Hz -53 dBc 193.7 fsec 1 kHz Offset -112 dBc/Hz Integer, 50 MHz PD 10 kHz Offse -110 dBc/Hz Integer, 50 MHz PD 100 kHz Offset -111 dBc/Hz Integrated Phase Noise RMS Jitter from 10KHz to 100MHz Closed Loop Phase Noise PLL + VCO at fvco with 127 KHz BW Loop Filter Design[6] Integer, 50 MHz PD Integer, 50 MHz PD 1 MHz Offset -138 dBc/Hz Integer, 50 MHz PD 10 MHz Offset -160 dBc/Hz Integer, 50 MHz PD 100 MHz Offset -171 dBc/Hz Integrated Phase Noise RMS Jitter from 10KHz to 100MHz -57.3 dBc 118 fsec Fractional, 50 MHz PD 1 kHz Offset -109 dBc/Hz Fractional, 50 MHz PD 10 kHz Offse -107 dBc/Hz Fractional, 50 MHz PD 100 kHz Offset -110 dBc/Hz Fractional, 50 MHz PD 1 MHz Offset -136 dBc/Hz Fractional, 50 MHz PD 10 MHz Offset -157 dBc/Hz Fractional, 50 MHz PD 100 MHz Offset -171 dBc/Hz -55.55 dBc 144.1 fsec Floor Integer Mode -230 dBc/Hz Floor Fractional Mode -227 dBc/Hz Integrated Phase Noise RMS Jitter Figure of Merit 7-5 -54.2 169.8 from 10KHz to 100MHz Normalized 1 Hz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to place Chelmsford, orders: Analog Devices, Inc., For price,is assumed delivery, andDevices to place orders: Microwave Corporation,20 Alpha MA 01824 responsibility by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Order781-329-4700 On-line at *www.hittite.com Phone: Order online at www.analog.com license is granted by implication or otherwise under any patent orFax: patent 978-250-3373 rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Electrical Specifications (Continued) Parameter Condition Min. Typ. -268 Flicker (Both Modes) Max. Units dBc/Hz [2] The closed loop phase noise PLL+VCO at fvco/2 can be calculated by subtracting 6dB. The closed loop phase noise PLL+VCO at 2fvco can be calculated by adding 6dB. Loop Filter Configuration Table C1 (pF) C2 (nF) C3 (pF) C4 (pF) R2 (k) R3 (k) R4 (k) [3] 470 10 82 82 0.51 1 1 [4] 120 2.7 33 33 0.91 2 2 [5] 330 10 180 180 0.75 1 1 [6] 120 4.7 33 33 1.3 2 2 Loop Filter Design Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to placeChelmsford, orders: Analog MA Devices, Inc., For price,isdelivery, andDevices to place orders: Microwave Corporation,20 Alpha 01824 responsibility assumed by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone:or 978-250-3343 Fax: On-line at *www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication otherwise under any patent or patent 978-250-3373 rights of Analog Devices. Order Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com 7 PLLS WITH INTEGRATED VCO - SMT Loop Filter Configuration 7-6 HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Typical Closed Loop Fractional Phase Noise [1] Closed Loop Integer Phase Noise -100 -120 -140 -160 50MHz PFD 71KHz BW 169 fsec 50MHz PFD 127KHz BW 118 fsec 100MHz PFD 100KHz BW 129 fsec 100MHz PFD 178KHz BW 89 fsec -180 3 10 10 4 7 10 5 10 6 10 7 10 -120 -140 -160 50MHz PFD 71KHz BW 193 fsec 50MHz PFD 127KHz BW 144 fsec 100MHz PFD 100KHz BW 123 fsec 100MHz PFD 178KHz BW 108 fsec -180 3 10 8 OFFSET FREQUENCY (Hz) 4 10 5 10 6 10 7 10 8 Typical Tuning Curves vs. Switch Position -20 1100 -40 fmax -60 1336MHz -80 2647MHz 5304MHz n0 1050 n2 kvco (MHz/V) PHASE NOISE (dBc/Hz) 10 OFFSET FREQUENCY (Hz) Free Running Phase Noise fmax 1000 -100 -120 950 -140 fmin n4 n6 n8 n10 n12 n14 n16 n18 n20 n22 n24 n26 n28 n30 n31 -160 -180 2 10 900 10 3 10 4 10 5 10 6 10 7 10 0 1 2 8 3 4 5 TUNING VOLTAGE (V) OFFSET FREQUENCY (Hz) Free Running VCO Phase Noise Over Temperature Typical VCO Tuning Voltage After Calibration -100 5 TUNE VOLTAGE AFTER CALIBRATION (V) -110 PHASE NOISE (dBc/Hz) PLLS WITH INTEGRATED VCO - SMT PHASE NOISE (dBc/Hz) @2607MHz PHASE NOISE (dBc/Hz) @2600MHz -100 100 kHz Offset +27C +85C -40C -120 -130 1 MHz Offset -140 -150 10 MHz Offset -160 -170 2620 2660 2700 2740 2780 2820 FREQUENCY (MHz) 4 fmin 3 31 fmax 15 0 2 1 0 VCO FREQUENCY [1] RMS Jitter data is measured from 10KHz to 100MHz bandwidth. 7-7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to place Chelmsford, orders: Analog Devices, Inc., For price,is assumed delivery, andDevices to place orders: Microwave Corporation,20 Alpha MA 01824 responsibility by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Order781-329-4700 On-line at *www.hittite.com Phone: Order online at www.analog.com license is granted by implication or otherwise under any patent orFax: patent 978-250-3373 rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Typical VCO Sensitivity vs. Cap @ Fo Voltage Typical Output Power - Narrow Band Match 20 35 TUNING CAP 31, 2539 MHz AT 2V TUNING CAP 15, 2644 MHz AT 2V TUNING CAP 0, 2898 MHz AT 2V 15 OUTPUT POWER (dBm) KVCO (MHz/V) 30 25 20 Typical Operating Range 15 10 10 5 Divide-by-2 Fundamental -40C -40C 27C 27C 85C 85C Doubler -40C 0 27C -5 5 0 0 1 2 3 4 -10 1000 5 TUNING VOLTAGE (V) 85C 2000 3000 4000 5000 6000 OUTPUT FREQUENCY (MHz) Figure of Merit NORMALIZED PHASE NOISE (dBc/Hz) -200 -210 Typ FOM vs Offset -220 FOM Floor FOM 1/f Noise -230 -240 2 10 10 3 10 4 10 5 10 6 FREQUENCY OFFSET (Hz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to placeChelmsford, orders: Analog MA Devices, Inc., For price,isdelivery, andDevices to place orders: Microwave Corporation,20 Alpha 01824 responsibility assumed by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone:or 978-250-3343 Fax: On-line at *www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication otherwise under any patent or patent 978-250-3373 rights of Analog Devices. Order Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com 7 PLLS WITH INTEGRATED VCO - SMT 40 7-8 HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Pin Descriptions PLLS WITH INTEGRATED VCO - SMT 7 7-9 Pin Number Function Description 1 AVDD DC Power Supply for analog circuitry. 2, 5, 6, 8, 9, 11 - 14, 18 - 22, 24, 26, 34, 37, 38 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 3 VPPCP Power Supply for charge pump analog section 4 CP Charge Pump Output 7 VDDCP Power Supply for the charge pump digital section 10 RVDD Reference Supply 15 XREFP Reference Oscillator Input 16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry 17 CEN Chip Enable. Connect to logic high for normal operation. 23 VTUNE VCO Varactor. Tuning Port Input. 25 VCC2 VCO Analog Supply 2 27 VCC1 VCO Analog Supply 1 28 RF_N [1] RF Positive Output 29 [1] 30 RF_P SEN RF Negative Output PLL Serial Port Enable (CMOS) Logic Input 31 SDI PLL Serial Port Data (CMOS) Logic Input 32 SCK PLL Serial Port Clock (CMOS) Logic Input 33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO) 35 VCCHF DC Power Supply for Analog Circuitry 36 VCCPS DC Power Supply for Analog Prescaler 39 VCCPD DC Power Supply for Phase Detector 40 BIAS External bypass decoupling for precision bias circuits. Note: 1.920V 20mV reference voltage (BIAS) is generated internally and cannot drive an external load. Must be measured with 10G meter such as Agilent 34410A, normal 10M DVM will read erroneously. [1] For doubler mode of operation, pin 28 (RF_N) and pin 29 (RF_P) outputs must be shorted together. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to place Chelmsford, orders: Analog Devices, Inc., For price,is assumed delivery, andDevices to place orders: Microwave Corporation,20 Alpha MA 01824 responsibility by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Order781-329-4700 On-line at *www.hittite.com Phone: Order online at www.analog.com license is granted by implication or otherwise under any patent orFax: patent 978-250-3373 rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Absolute Maximum Ratings AVDD, RVDD, DVDD3V, VCCPD, VCCHF, VCCPS -0.3V to +3.6V VPPCP, VDDCP, VCC1 -0.3V to +5.8V VCC2 -0.3V to +5.5V Operating Temperature -40C to +85C Storage Temperature -65C to 125C Maximum Junction Temperature 125 C Thermal Resistance (RTH) (junction to ground paddle) 20 C/W Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Reflow Soldering Peak Temperature 260C Time at Peak Temperature 40 sec ESD Sensitivity (HBM) 7 Class 1B PLLS WITH INTEGRATED VCO - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [1] HMC840LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H840 XXXX [1] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to placeChelmsford, orders: Analog MA Devices, Inc., For price,isdelivery, andDevices to place orders: Microwave Corporation,20 Alpha 01824 responsibility assumed by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone:or 978-250-3343 Fax: On-line at *www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication otherwise under any patent or patent 978-250-3373 rights of Analog Devices. Order Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com 7 - 10 HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Evaluation PCB PLLS WITH INTEGRATED VCO - SMT 7 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation PCB Schematic To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC840LP6CE from the "Search by Part Number" pull down menu to view the product splash page. Evaluation Order Information Item Evaluation PCB Only Evaluation Kit 7 - 11 Contents Part Number HMC840LP6CE Fo/2 & Fo Evaluation PCB 129515-HMC840LP6CE HMC840LP6CE 2xFo Evaluation PCB 129516-HMC840LP6CE HMC840LP6CE Fo/2 & Fo Evaluation PCB USB Interface Board 6' USB A Male to USB B Female Cable CD ROM (Contains User Manual, Evaluation PCB Schematic, Evaluation Software, Hittite PLL Design Software) 129075-HMC840LP6CE HMC840LP6CE 2xFo Evaluation PCB USB Interface Board 6' USB A Male to USB B Female Cable CD ROM (Contains User Manual, Evaluation PCB Schematic, Evaluation Software, Hittite PLL Design Software) 129076-HMC840LP6CE Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to place Chelmsford, orders: Analog Devices, Inc., For price,is assumed delivery, andDevices to place orders: Microwave Corporation,20 Alpha MA 01824 responsibility by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Order781-329-4700 On-line at *www.hittite.com Phone: Order online at www.analog.com license is granted by implication or otherwise under any patent orFax: patent 978-250-3373 rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com HMC840LP6CE v00.1210 FRACTIONAL-N PLL WITH INTEGRATED VCO 1310 - 1415, 2620 - 2830, 5240 - 5660 MHz Notes: PLLS WITH INTEGRATED VCO - SMT 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and Road, to placeChelmsford, orders: Analog MA Devices, Inc., For price,isdelivery, andDevices to place orders: Microwave Corporation,20 Alpha 01824 responsibility assumed by Analog for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone:or 978-250-3343 Fax: On-line at *www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication otherwise under any patent or patent 978-250-3373 rights of Analog Devices. Order Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarksApplication are the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com 7 - 12