TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 DUAL-CHANNEL 10- SPST ANALOG SWITCH Check for Samples: TS5A2066 APPLICATIONS FEATURES 1 * * * * * * * 2 * Low ON-State Resistance (10 ) Control Inputs Are 5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.5-V Single-Supply Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 22 - 2000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) * * * * * * * Sample-and-Hold Circuits Battery-Powered Equipment Audio and Video Signal Routing Communication Circuits Cell Phones Low-Voltage Data-Acquisition Systems PDAs DESCRIPTION/ORDERING INFORMATION The TS5A2066 is a dual single-pole single-throw (SPST) analog switch that is designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction. Table 1. Summary of Characteristics (1) DCT OR DCU PACKAGE (TOP VIEW) Dual Single Pole Single Throw (2 x SPST) Configuration NO1 1 8 V+ COM1 2 7 IN1 Number of channels ON-state resistance (ron) 7.5 ON-state resistance match (ron) 0.4 ON-state resistance flatness (ron(flat)) 3.5 IN2 3 6 COM2 GND 4 5 NO2 Turn-on/turn-off time (tON/tOFF) Charge injection (QC) YZP PACKAGE (BOTTOM VIEW) GND IN2 COM1 NO1 Bandwidth (BW) -68 dB NO2 Crosstalk (XTALK) -66 dB 0.01% 50 nA 4 6 C2 COM2 Total harmonic distortion (THD) 2 7 B2 IN1 Leakage current (ICOM(OFF)/(INC(OFF) B1 A1 1 8 A2 1 pC OFF isolation (OISO) C1 3 D2 5.8 ns/3.6 ns 400 MHz 5 D1 2 V+ Power-supply current (I+) Package options (1) 0.1 mA 8-pin DSBGA, SSOP, or VSSOP V+ = 5 V and TA = 25C 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NanoFree is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2005-2010, Texas Instruments Incorporated TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com ORDERING INFORMATION (1) -40C to 85C (1) (2) (3) ORDERABLE PART NUMBER PACKAGE (2) TA TOP-SIDE MARKING (3) NanoFreeTM - WCSP (DSBGA) 0.23-mm Large Bump - YZP (Pb-free) Reel of 3000 TS5A2066YZPR _ _ _J4_ SSOP - DCT Reel of 3000 TS5A2066DCTR JAG_ _ _ VSSOP - DCU Reel of 3000 TS5A2066DCUR JAG_ For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. DCT: The actual top-side marking has three additional characters that designate the year, month, and wafer fab/assembly site. DCU: The actual top-side marking has one additional character that designates the wafer fab/assembly site. YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character to designate the wafer fab/assembly site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, = Pb-free). FUNCTION TABLE IN NO TO COM, COM TO NO L OFF H ON Absolute Minimum and Maximum Ratings (1) (2) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT -0.5 6.5 V -0.5 V+ + 0.5 V Supply voltage range (3) VNO VCOM Analog voltage range (3) (4) (5) IK Analog port diode current VNO, VCOM < 0 or VNO, VCOM > V+ -50 50 mA INO ICOM On-state switch current VNO, VCOM = 0 to V+ -50 50 mA VI Digital input voltage range (3) -0.5 6.5 V IIK Digital input clamp current I+ Continuous current through V+ IGND Continuous current through GND qJA Package thermal impedance (6) V+ Tstg (1) (2) (3) (4) (5) (6) 2 (4) VI < 0 -50 -100 mA 100 mA 100 mA DCT package 220 DCU package 227 YZP package 102 Storage temperature range -65 150 C/W C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All voltages are with respect to ground, unless otherwise specified. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. This value is limited to 5.5 V maximum. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.5 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance VCOM, VNO ron 0 0 VNO V+, ICOM = -32 mA, Switch ON, See Figure 13 ON-state resistance match between channels ron VNO = 3.15 V, ICOM = -32 mA, Switch ON, SeeFigure 13 ON-state resistance flatness ron(flat) 0 VNO V+, ICOM = -32 mA, Switch ON, See Figure 13 NO OFF leakage current COM OFF leakage current NO ON leakage current COM ON leakage current 25C Full 7.5 4.5 V INO(OFF) VNO = 1 V, VCOM = 4.5 V, or VNO = 4.5 V, VCOM = 1 V, Switch OFF, See Figure 14 ICOM(OFF) VCOM = 1 V, VNO = 4.5 V, or VCOM = 4.5 V, VNO = 1 V, Switch OFF, See Figure 14 INO(ON) VNO = 1 V, VCOM = Open, or VNO = 4.5 V, VCOM = Open Switch ON, See Figure 15 ICOM(ON) VCOM = 1 V, VNO = Open, or VCOM = 4.5 V, VNO = Open, 0.4 4.5 V 25C Full 25C Full -30 5.5 V 25C Full 25C Full 25C Switch ON, See Figure 15 Full -12 nA nA 40 40 -30 50 50 -4 -70 5.5 V -8 30 40 -50 -40 5.5 V -10 5 8 -40 -50 5.5 V 3.5 4 V 1 3 2 4.5 V 10 15 25C Full V+ nA 70 -70 70 nA Digital Control Input (IN) Input logic high VIH Full V+ x 0.7 5.5 Input logic low VIL Full 0 V+ x 0.3 Input leakage current IIH, IIL (1) VI = 5.5 V or 0 25C Full 5.5 V -0.1 0.05 -1 0.1 1 V V mA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 3 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com Electrical Characteristics for 5-V Supply (1) (continued) V+ = 4.5 V to 5.5 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 5V 4.4 5.2 5.8 Full 4.5 V to 5.5 V 3.4 25C 5V 1.7 Full 4.5 V to 5.5 V 1.3 UNIT Dynamic Turn-on time tON VCOM = 3 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 3 V, RL = 300 , CL = 35 pF, See Figure 17 Charge injection QC VGEN = 0, RGEN = 0, CL = 0.1 nF, See Figure 21 25C 5V 1 pC NO OFF capacitance CNO(OFF) VNO = V+ or GND, Switch OFF, See Figure 16 25C 5V 5.5 pF COM OFF capacitance CCOM(OFF) VCOM = V+ or GND, Switch OFF, See Figure 16 25C 5V 5.5 pF NO ON capacitance CNO(ON) VNO = V+ or GND, Switch ON, See Figure 16 25C 5V 13.5 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 16 25C 5V 13.5 pF VI = V+ or GND, See Figure 16 25C 5V 2.5 pF Digital input capacitance CI 6.1 2.6 ns 3.6 4.2 ns Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 5V 300 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 5V -68 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 5V -66 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 22 25C 5V 0.01 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current 4 I+ 25C Full Submit Documentation Feedback 5.5 V 0.1 1 5 mA Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NO OFF leakage current COM OFF leakage current NO ON leakage current COM ON leakage current VCOM, VNO 0 ron 0 VNO V+, ICOM = -24 mA, Switch ON, See Figure 13 ron VNO = 2.1 V, ICOM = -24 mA, Switch ON, See Figure 13 ron(flat) 0 VNO V+, ICOM = -24 mA, Switch ON, See Figure 13 INO(OFF) VNO = 1 V, VCOM = 3 V, or VNO = 3 V, VCOM = 1 V, Switch OFF, See Figure 14 ICOM(OFF) VCOM = 1 V, VNO = 3 V, or VCOM = 3 V, VNO = 1 V, Switch OFF, See Figure 14 VNO = 1 V, VCOM = Open, or VNO = 3 V, VCOM = Open, Switch ON, See Figure 15 VCOM = 1 V, VNO = Open, or VCOM = 3 V, VNO = Open, Switch ON, See Figure 15 25C Full 3V 25C INO(ON) ICOM(ON) Full 3V 25C Full 25C Full 25C Full 25C Full 3.6 V 3.5 7 8 12 -6 30 40 -7 nA 50 50 -7 nA 40 -40 -70 V 1.5 -50 -40 3.6 V 0.5 -40 -50 3.6 V 20 9 -30 3.6 V 15 0.01 6 3V 12 12 0.04 25C Full 10 V+ 40 -20 nA 70 -70 70 nA Digital Control Input (IN) Input logic high VIH Full V+ x 0.7 5.5 V Input logic low VIL Full 0 V+ x 0.3 V 25C -0.1 Input leakage current (1) IIH, IIL VI = 5.5 V or 0 Full 3.6 V 0.05 -1 0.1 1 mA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 5 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com Electrical Characteristics for 3.3-V Supply (1) (continued) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 3.3 V 4.9 5.6 6.4 Full 3 V to 3.6 V 4.3 25C 3.3 V 2 Full 3 V to 3.6 V 1.3 UNIT Dynamic Turn-on time tON VCOM = 2 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 2 V, RL = 300 , CL = 35 pF, See Figure 17 Charge injection QC VGEN = 0, RGEN = 0, CL = 0.1 nF, See Figure 21 25C 3.3 V 0.5 pC NO OFF capacitance CNO(OFF) VNO = V+ or GND, Switch OFF, See Figure 16 25C 3.3 V 5.5 pF COM OFF capacitance CCOM(OFF) VCOM = V+ or GND, Switch OFF, See Figure 16 25C 3.3 V 6 pF NO ON capacitance CNO(ON) VNO = V+ or GND, Switch ON, See Figure 16 25C 3.3 V 14 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 16 25C 3.3 V 14 pF VI = V+ or GND, See Figure 16 25C 3.3 V 3 pF Digital input capacitance CI 7.1 2.7 ns 3.7 4.7 ns Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 3.3 V 300 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 3.3 V -68 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 3.3 V -66 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 22 25C 3.3 V 0.065 % Supply . Positive supply current 6 I+ VI = V+ or GND, Switch ON or OFF 25C Full Submit Documentation Feedback 3.6 V 0.1 1 5 mA Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NO OFF leakage current COM OFF leakage current NO ON leakage current COM ON leakage current VCOM, VNO 0 ron 0 VNO V+, ICOM = -8 mA, Switch ON, See Figure 13 ron VNO = 1.6 V, ICOM = -8 mA, Switch ON, SeeFigure 13 ron(flat) 0 VNO V+, ICOM = -8 mA, Switch ON, See Figure 13 INO(OFF) VNO = 0.5 V, VCOM = 2.2 V, or VNO = 2.2 V, VCOM = 0.5 V, Switch OFF, See Figure 14 ICOM(OFF) VCOM = 0.5 V, VNO = 2.2 V, or VCOM = 2.2 V, VNO = 0.5 V, Switch OFF, See Figure 14 INO(ON) VNO = 0.5 V, VCOM = Open, or VNO = 2.2 V, VCOM = Open, Switch ON, See Figure 15 ICOM(ON) VCOM = 0.5 V, VNO = Open, or VCOM = 2.2 V, VNO = Open, Switch ON, See Figure 15 25C Full 2.3 V 25C Full 2.3 V 25C Full 25C Full 2.7 V 25C Full 25C Full 18 25 -5.5 30 40 -7.5 nA 50 50 -5 nA 40 -40 -70 2.7 V 16 -50 -40 2.7 V 5 -40 -50 V 1.5 15 -30 2.7 V 0.5 0.02 12 2.3 V 22 30 0.04 25C Full 20 V+ 40 -12 nA 70 -70 70 nA Digital Control Input (IN) Input logic high VIH Full V+ x 0.7 5.5 V Input logic low VIL Full 0 V+ x 0.3 V 25C -0.1 Input leakage current (1) IIH, IIL VI = 5.5 V or 0 Full 2.7 V 0.05 -1 0.1 1 mA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 7 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com Electrical Characteristics for 2.5-V Supply (1) (continued) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 2.5 V 5.7 6.4 8.1 Full 2.3 V to 2.7 V 4.4 25C 2.5 V 2.1 Full 2.3 V to 2.7 V 1.8 UNIT Dynamic Turn-on time tON VCOM = 1.5 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.5 V, RL = 300 , CL = 35 pF, See Figure 17 Charge injection QC VGEN = 0, RGEN = 0, CL = 0.1 nF, See Figure 20 25C 2.5 V 0.5 pC NO OFF capacitance CNO(OFF) VNO = V+ or GND, Switch OFF, See Figure 16 25C 2.5 V 6 pF COM OFF capacitance CCOM(OFF) VCOM = V+ or GND, Switch OFF, See Figure 16 25C 2.5 V 6 pF NO ON capacitance CNO(ON) VNO = V+ or GND, Switch ON, See Figure 16 25C 2.5 V 14 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 16 25C 2.5 V 14 pF VI = V+ or GND, See Figure 16 25C 2.5 V 3 pF Digital input capacitance CI 8.5 3.1 ns 4.3 4.8 ns Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 2.5 V 300 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 2.5 V -68 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 2.5 V -66 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 22 25C 2.5 V 0.35 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current 8 I+ 25C Full Submit Documentation Feedback 2.7 V 0.1 1 5 mA Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance VCOM, VNO ron 0 0 VNO V+, ICOM = -4 mA, Switch ON, See Figure 13 ON-state resistance match between channels ron VNO = 1.15 V, ICOM = -4 mA, Switch ON, See Figure 13 ON-state resistance flatness ron(flat) 0 VNO V+, ICOM = -4 mA, Switch ON, See Figure 13 INO(OFF) VNO = 0.3 V, VCOM = 1.65 V, or VNO = 1.65 V, VCOM = 0.3 V, Switch OFF, See Figure 14 ICOM(OFF) VCOM = 0.3 V, VNO = 1.65 V, or VCOM = 1.65 V, VNO = 0.3 V, Switch OFF, See Figure 14 INO(ON) VNO = 0.3 V, VCOM = Open, or VNO = 1.65 V, VCOM = Open, Switch ON, See Figure 15 ICOM(ON) VCOM = 0.3 V, VNO = Open, or VCOM = 1.65 V, VNO = Open, NO OFF leakage current COM OFF leakage current NO ON leakage current COM ON leakage current 25C Full 1.65 V 25C Full 1.65 V 25C Full 25C Full 25C Full 1.95 V 25C Switch ON, See Figure 15 Full 75 85 100 -6 30 40 -7 nA 50 50 7 nA 40 -40 -70 1.95 V 6 -50 -40 V 2 -40 -50 1.95 V 0.9 85 -30 1.95 V 120 0 70 1.65 V 85 90 0 25C Full 80 V+ 40 -8.5 nA 70 -70 70 nA Digital Control Input (IN) Input logic high VIH Full V+ x 0.65 5.5 V Input logic low VIL Full 0 V+ x 0.35 V 25C -0.1 Input leakage current (1) IIH, IIL VI = 5.5 V or 0 Full 1.95 V 0.05 -1 0.1 1 mA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 9 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com Electrical Characteristics for 1.8-V Supply (1) (continued) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 1.8 V 9.3 10.4 11.5 Full 1.65 V to 1.95 V 6.8 25C 1.8 V 3.3 Full 1.65 V to 1.95 V 2.4 UNIT Dynamic tON VCOM = 1.3 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.3 V, RL = 300 , CL = 35 pF, See Figure 17 Charge injection QC VGEN = 0, RGEN = 0, CL = 0.1 nF, See Figure 21 25C 1.8 V 0.5 pC VNO = V+ or GND, See Figure 16 Switch OFF, 25C 1.8 V 6 pF VCOM = V+ or GND, Switch OFF, See Figure 16 25C 1.8 V 6 pF VNO = V+ or GND, See Figure 16 Switch ON, 25C 1.8 V 14.5 pF VCOM = V+ or GND, Switch ON, See Figure 16 25C 1.8 V 14.5 pF VI = V+ or GND, See Figure 16 25C 1.8 V 3 pF Turn-on time NO OFF capacitance CNO(OFF) COM OFF capacitance CCOM(OFF) NO ON capacitance CNO(ON) COM ON capacitance CCOM(ON) Digital input capacitance CI 12.9 4.3 ns 5.2 6.5 ns Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 1.8 V 293 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 1.8 V -68 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 1.8 V -66 dB Total harmonic distortion THD RL = 10 k, CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 22 25C 1.8 V 2.7 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current 10 I+ 25C Full Submit Documentation Feedback 1.95 V 0.1 1 5 mA Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 TYPICAL PERFORMANCE V+ = 1.65 V V+ = 2.3 V 90 25 TA = 25C NO1 > COM1 80 70 TA = 25C NO1 > COM1 Figure 1 20 15 50 ron (W) ron () 60 40 30 20 10 5 10 0 0 0 0.25 0.5 0.75 1 1.25 1.5 1.75 0 0.3 0.6 0.9 1.2 VCOM (V) V+ = 3 V 1.8 2.1 2.4 V+ = 4.5 V 10 14 TA = 25C NO1 > COM1 12 9 TA = 25C NO1 > COM1 8 10 7 8 ron (W) ron (W) 1.5 VCOM (V) 6 6 5 4 3 4 2 2 1 0 0 0 0.5 1 1.5 2 2.5 3 0 0.5 1 1.5 2 VCOM (V) 2.5 3 3.5 4 4.5 VCOM (V) Figure 1. ron vs VCOM 16 TA = -40C TA = 25C TA = 85C 14 ron (W) 12 10 8 6 4 2 0 0 0.5 1 1.5 VCOM (V) 2 2.5 3 Figure 2. ron vs VCOM (V+ = 3 V) Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 11 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com TYPICAL PERFORMANCE (continued) 10 TA = -40C TA = 25C TA = 85C 9 8 ron (W) 7 6 5 4 3 2 1 0 0 0.5 1 1.5 2 2.5 3 VCOM (V) 3.5 4 4.5 Figure 3. ron vs VCOM (V+ = 4.5 V) 20 INO2(ON) 18 Leakage (nA) 16 INO2(OFF) 14 ICOM2(ON), ICOM2(OFF) 12 INO1(ON) 10 ICOM1(ON), ICOM1(OFF) 8 INO1(OFF) 6 4 2 0 -40C 25C TA (5C) 85C QC Figure 4. Leakage Current vs Temperature 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 3.3 V 5V 0 1 2 3 4 5 6 VCOM Figure 5. Charge Injection (QC) vs VCOM 12 Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 TYPICAL PERFORMANCE (continued) 12 tON/tOFF (ns) 10 8 tON 6 4 tOFF 2 0 1.65 2.15 2.65 3.15 3.65 4.15 4.65 5.15 Supply Voltage (V) Figure 6. tON and tOFF vs V+ 6 tON 5 tON/tOFF (ns) 4 3 tOFF 2 1 0 -40C 25C 85C TA (5C) Figure 7. tON and tOFF vs Temperature (V+ = 5 V) 3.5 TA = 25C Logic Threshold (V) 3 2.5 2 VIH 1.5 1 VIL 0.5 0 1.6 2.1 2.6 3.1 3.6 4.1 V+ (V) 4.6 5.1 5.6 Figure 8. Logic Threshold vs V+ Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 13 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com TYPICAL PERFORMANCE (continued) 5 0 Gain 0 -5 TA = 25C Phase -2 -10 -15 -4 -20 -6 Phase () Gain (dB) -1 -25 -8 -30 -10 0.1 10 Frequency (MHz) 1 100 -35 1000 Figure 9. Bandwidth (V+ = 5 V) 0 -20 Gain (dB) -40 -60 Crosstalk -80 OFF Isolation -100 -120 0.1 1 10 100 1000 Frequency (MHz) Figure 10. OFF Isolation and Crosstalk (V+ = 5 V) 7 THD + Noise (%) 6 THD (3.3 V) 5 4 3 2 1 THD (5 V) 0 0.1 1 10 Frequency (MHz) 100 1000 Figure 11. Total Harmonic Distortion vs Frequency 14 Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 TYPICAL PERFORMANCE (continued) 70 ICC TYP (nA) 60 50 40 30 20 10 0 -40C 25C TA (5C) 85C Figure 12. Power-Supply Current vs Temperature (V+ = 5 V) Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 15 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com Table 2. PIN DESCRIPTION NO. NAME DESCRIPTION 1 NO1 2 COM1 Normally open 3 IN2 4 GND Digital ground 5 NO2 Normally open 6 COM2 7 IN1 Digital control to connect COM to NO 8 V+ Power supply Common Digital control to connect COM to NO Common Table 3. PARAMETER DESCRIPTION SYMBOL VCOM VNO ron ron ron(flat) Voltage at NO Resistance between COM and NO ports when the channel is ON Difference of ron between channels in a specific device Difference between the maximum and minimum value of ron in a channel over the specified range of conditions INO(OFF) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state INO(ON) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output (COM) open ICOM(OFF) Leakage current measured at the COM port, with the corresponding channel (COM to NO) in the OFF state ICOM(ON) Leakage current measured at the COM port, with the corresponding channel (COM to NO) in the ON state and the output (NO) open VIH Minimum input voltage for logic high for the control input (IN) VIL Maximum input voltage for logic low for the control input (IN) VI Voltage at the control input (IN) IIH, IIL Leakage current measured at the control input (IN) tON Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM or NO) signal when the switch is turning ON. tOFF Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM or NO) signal when the switch is turning OFF. QC Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NO or COM) output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input.Charge injection, QC = CL x VCOM, CL is the load capacitance and VCOM is the change in analog output voltage. CNO(OFF) Capacitance at the NO port when the corresponding channel (NO to COM) is OFF CNO(ON) Capacitance at the NO port when the corresponding channel (NO to COM) is ON CCOM(OFF) Capacitance at the COM port when the corresponding channel (COM to NO) is OFF CCOM(ON) Capacitance at the COM port when the corresponding channel (COM to NO) is ON CI Capacitance of IN OISO OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific frequency, with the corresponding channel (NO to COM) in the OFF state. XTALK Crosstalk is a measurement of unwanted signal coupling from an ON channel to an adjacent ON channel (NC1 to NC2). This is measured in a specific frequency and in dB. BW Bandwidth of the switch. This is the frequency in which the gain of an ON channel is -3 dB below the DC gain. THD Total harmonic distortion is defined as the ratio of the root mean square (RMS) value of the second, third, and higher harmonics to the magnitude of fundamental harmonic. I+ 16 DESCRIPTION Voltage at COM Static power-supply current with the control (IN) pin at V+ or GND Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 PARAMETER MEASUREMENT INFORMATION V+ VNO NO COM + VCOM Channel ON r on + VI ICOM IN VCOM * VNO W I COM VI = VIH or VIL + GND Figure 13. ON-State Resistance (ron) V+ VNO NO COM + VCOM + VI OFF-State Leakage Current Channel OFF VI = VIH or VIL IN + GND Figure 14. OFF-State Leakage Current (ICOM(OFF), INO(OFF)) V+ VNO NO COM + VI VCOM ON-State Leakage Current Channel ON VI = VIH or VIL IN + GND Figure 15. ON-State Leakage Current (ICOM(ON), INO(ON)) Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 17 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ VNO NO Capacitance Meter VBIAS = V+ or GND VI = VIH or VIL VCOM COM Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. VBIAS VI IN GND Figure 16. Capacitance (CI, CCOM(OFF), CCOM(ON), CNO(OFF), CNO(ON)) (1) All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. (2) CL includes probe and jig capacitance. (3) See Electrical Characteristics for VCOM. V+ NO VCOM VI Logic Input(1) (3) VNO TEST RL CL tON 300 35 pF tOFF 300 35 pF COM CL(2) IN GND RL V+ Logic Input (VI) 50% 50% 0 tON Switch Output (VNO) tOFF 90% 90% Figure 17. Turn-On (tON) and Turn-Off Time (tOFF) 18 Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 TS5A2066 www.ti.com SCDS184D - JANUARY 2005 - REVISED APRIL 2010 PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer 50 W VNO NO Channel ON: NO to COM VCOM COM VI = V+ or GND Source Signal Network Analyzer Setup VI 50 W IN Source Power = 0 dBm (632-mV P-P at 50-W load) + GND DC Bias = 350 mV Figure 18. Bandwidth (BW) V+ Network Analyzer Channel OFF: NO to COM 50 W VNO NO VI = V+ or GND COM Source Signal VCOM 50 W Network Analyzer Setup VI 50 W Source Power = 0 dBm (632-mV P-P at 50-W load) IN + GND DC Bias = 350 mV Figure 19. OFF Isolation (OISO) V+ Network Analyzer 50 W VNO1 Source Signal NO1 Channel ON: NO to COM COM1 NO2 VNO2 50 W VI COM2 50 W Network Analyzer Setup Source Power = 0 dBm (632 mV P-P at 50 W load) IN + GND DC Bias = 350 mV Figure 20. Crosstalk (XTALK) (4) All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. (5) CL includes probe and jig capacitance. Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 19 TS5A2066 SCDS184D - JANUARY 2005 - REVISED APRIL 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ RGEN VGEN Logic Input (VI) VIH OFF ON OFF V IL NO COM + VCOM VCOM VCOM CL(2) VI VGEN = 0 to V+ IN Logic Input(1) RGEN = 0 CL = 0.1 nF QC = CL x VCOM VI = VIH or VIL GND Figure 21. Charge Injection (QC) (6) CL includes probe and jig capacitance. Channel ON: COM to NC VSOURCE = V+ P-P VI = VIH or VIL RL = 600 fSOURCE = 20 Hz to 20 kHz CL = 50 pF V+/2 V+ Audio Analyzer RL 10 mF Source Signal 10 mF NO COM 600 W 600 W CL(1) VI IN GND 600 W Figure 22. Total Harmonic Distortion (THD) 20 Submit Documentation Feedback Copyright (c) 2005-2010, Texas Instruments Incorporated Product Folder Link(s): TS5A2066 PACKAGE OPTION ADDENDUM www.ti.com 13-Apr-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TS5A2066DCTR ACTIVE SM8 DCT 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A2066DCTRE4 ACTIVE SM8 DCT 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A2066DCTRG4 ACTIVE SM8 DCT 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A2066DCUR ACTIVE US8 DCU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A2066DCURE4 ACTIVE US8 DCU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A2066DCURG4 ACTIVE US8 DCU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A2066YZPR ACTIVE DSBGA YZP 8 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 4-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A2066DCUR US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 Q3 TS5A2066YZPR DSBGA YZP 8 3000 180.0 8.4 1.02 2.02 0.63 4.0 8.0 Q1 TS5A2066YZPR DSBGA YZP 8 3000 178.0 9.2 1.02 2.02 0.63 4.0 8.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 4-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A2066DCUR US8 DCU 8 3000 202.0 201.0 28.0 TS5A2066YZPR DSBGA YZP 8 3000 220.0 220.0 34.0 TS5A2066YZPR DSBGA YZP 8 3000 220.0 220.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MPDS049B - MAY 1999 - REVISED OCTOBER 2002 DCT (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE 0,30 0,15 0,65 8 0,13 M 5 0,15 NOM CCCCC CCCCC CCCCC CCCCC 2,90 2,70 4,25 3,75 Gage Plane PIN 1 INDEX AREA 1 0,25 4 0 - 8 3,15 2,75 0,60 0,20 1,30 MAX Seating Plane 0,10 0,10 0,00 NOTES: A. B. C. D. 4188781/C 09/02 All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion Falls within JEDEC MO-187 variation DA. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated