https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AxiolineF, Temperature recording module, Analog inputs: 8 (8 inputs for thermocouples or linear voltage, plus 1 input -5V to +5V), connection method: 2-conductor (shielded, twisted pair), transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connectors Product Description The module is designed for use within an AxiolineF station. It is used to acquire signals from standard thermocouples in industrial applications. The module supports various types of thermocouple conforming to DINEN60584-1 and DIN46710 as well as linear voltages from -100mV to +100mV. It also offers a voltage input from -5V to +5V. Heating currents can be monitored here, forexample, using a measuring transducer. The four Pt 100 inputs (CJ1 ... CJ4) can each be used as a sensor input or as an external cold junction. Your advantages 8 analog input channels for the connection of thermocouples or linear voltages from -100mV to +100mV 1 analog input channel for the connection of voltages from -5V to +5V Connection of sensors in 2-conductor technology Internal detection and compensation of cold junction temperature (can be parameterized) External connection of Pt 100 cold junction sensors possible Easy to use due to internal linearization of the sensor characteristic curves High level of accuracy (typically 0.01 %sensor typeK) High temperature stability (typically 5ppm/K) High resistance to electromagnetic interference (ClassA) "Channel Scout" function Device rating plate stored Installation monitoring with indication via diagnostic LED for each channel Key Commercial Data Packing unit 1 pc GTIN 05/02/2021Page1/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 GTIN 4046356640923 Weight per Piece (excluding packing) 260.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Width 53.6 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to EN60715). Ambient conditions Ambient temperature (operation) -25 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level) Degree of protection IP20 Connection data Designation AxiolineF connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the "AxiolineF: system and installation" user manual. Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 1.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 1.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Color traffic grey A RAL 7042 Net weight 144 g Note on weight specifications with connectors and bus base module Degree of pollution 2 (IEC60664-1, EN60664-1) 05/02/2021Page2/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Technical data General Mounting position any (no temperature derating; Parameterize the mounting position using the object 0080hex ParaTable!) Interfaces Designation AxiolineFlocal bus Number 2 Connection method Bus base module Transmission speed 100 Mbps Axioline potentials Designation AxiolineF local bus supply (UBus) Supply voltage 5 VDC (via bus base module) Current consumption typ. 115 mA max. 180 mA Power consumption typ. 0.55 W max. 0.9 W Designation Supply for analog modules (UA) Supply voltage 24 VDC Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current consumption typ. 45.3 mA max. 70 mA Power consumption max. 1.68 W Protective circuit Surge protection electronic (35 V, 0.5 s) Reverse polarity protection Polarity protection diode Transient protection Suppressor diode Power consumption typ. 1.63 W (entire device) max. 2.58 W (entire device) Analog inputs Number of inputs 8 +1mm (8 inputs for thermocouples or linear voltage, plus 1 input -5V to +5V) Input name Analog inputs Description of the input Inputs for thermocouples or linear voltage Connection method Push-in connection Connection technology 2-conductor (shielded, twisted pair) Sensor types (RTD) that can be used Pt 100 (4 external cold junctions, can also be used as a sensor input) Sensor types that can be used (TC) U, T, L, J, E, K, N, S, R, B, C, W, HK Measuring principle Sigma/Delta process Measured value representation 16 bits (15 bits + sign bit) 05/02/2021Page3/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Technical data Analog inputs A/D converter resolution 24 bit Type of protection Short-circuit protection, overload protection of the inputs Transient protection of inputs Input filter time 40 ms Electrical isolation Test section 5V supply of the local bus (UBus) / 24V supply (I/Os) 500 VAC 50 Hz 1 min. 5V supply of the local bus (UBus) / functional ground 500 VAC 50 Hz 1 min. 24V supply (I/O) / functional ground 500 VAC 50 Hz 1 min. Standards and Regulations Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN61000-4-2/IEC61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN61000-4-3/IEC61000-4-3 Criterion A, Field intensity: 10 V/m Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN61000-4-4/IEC61000-4-4 Criterion A for shielded cables, 2kV Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN61000-4-5/IEC61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), 1 kV to shielded I/O cables Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN61000-4-6/IEC61000-4-6 Criterion A, Test voltage 10 V Interference emission Noise emission test according to EN 61000-6-3 Class B Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g Shock in acc. with EN60068-2-27/IEC60068-2-27 30g Continuous shock according to EN60068-2-27/IEC60068-2-27 10g Protection class III (IEC61140, EN61140, VDE0140-1) Overvoltage category II (IEC60664-1, EN60664-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 05/02/2021Page4/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Block diagram Connection diagram a1 00 01 02 03 04 05 06 07 a2 10 11 12 13 14 15 16 17 b1 20 21 22 23 24 25 26 27 b2 30 31 32 33 34 35 36 37 Internal wiring of the terminal points Connection diagram Connection diagram a1 00 01 02 03 04 05 06 07 a1 00 01 02 03 04 05 06 07 a2 10 11 12 13 14 15 16 17 a2 10 11 12 13 14 15 16 17 b1 20 21 22 23 24 25 26 27 b1 20 21 22 23 24 25 26 27 b2 30 31 32 33 34 35 36 37 b2 30 31 32 33 34 35 36 37 T1 NICr + UT1 NI 6 NI T2 Connection example: absolute temperature measurement + UT2 NICr Differential temperature measurement Connection diagram Connection diagram a1 00 01 02 03 04 05 06 07 a1 00 01 02 03 04 05 06 07 a2 10 11 12 13 14 15 16 17 a2 10 11 12 13 14 15 16 17 b1 20 21 22 23 24 25 26 27 b1 20 21 22 23 24 25 26 27 b2 30 31 32 33 34 35 36 37 b2 30 31 32 33 34 35 36 37 Pt100 A T1 + - Cu T2 + - Cu T3 + - Cu T4 + - Cu T5 + - Cu T6 + - Cu T7 + - Cu T8 + - Cu Pt100 Pt100 6 6 6 6 Pt100 Pt100 Pt 100 detection B Thermocouple detection with external cold junction compensation at channel1 05/02/2021Page5/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Dimensional drawing 126,1 54 122,4 53,6 Classifications eCl@ss eCl@ss 10.0.1 27242601 eCl@ss 11.0 27242601 eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 9.0 27242601 ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 UNSPSC 18.0 32151602 UNSPSC 19.0 32151602 UNSPSC 20.0 32151602 UNSPSC 21.0 32151602 05/02/2021Page6/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 EAC EAC-Zulassung cULus Listed Accessories Accessories Device marking Insert label-EMT (35X46)R-0801604 Insert label, for the Axioline F series from Phoenix Contact, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 46 mm, Number of individual labels: 500 DIN rail connector 05/02/2021Page7/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Accessories Bus connector-AXL F BS F-2688129 AxiolineF bus base module for housing type F Feed-through terminal block Thermoelectric voltage terminal block pair-MTKD-CU/CUNI-3100059 Thermoelectric voltage terminal block pair, TC type T, nom. voltage: 400 V, nominal current: 1 A, connection method: Screw connection, number of connections: 4, number of positions: 2, cross section: 0.2 mm-4 mm, AWG:24-12, width: 10.4 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 Thermoelectric voltage terminal block pair-MTKD-FE/CUNI-3100046 Thermoelectric voltage terminal block pair, TC type J, nom. voltage: 400 V, nominal current: 1 A, connection method: Screw connection, number of connections: 4, number of positions: 2, cross section: 0.2 mm-4 mm, AWG:24-12, width: 10.4 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 Thermoelectric voltage terminal block pair-MTKD-NICR/CUNI-3100075 Thermoelectric voltage terminal block pair, TC type E, nom. voltage: 400 V, nominal current: 1 A, connection method: Screw connection, number of connections: 4, number of positions: 2, cross section: 0.2 mm-4 mm, AWG:24-12, width: 10.4 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 Thermoelectric voltage terminal block pair-MTKD-NICR/NI-3100062 Thermoelectric voltage terminal block pair, TC type K, nom. voltage: 400 V, nominal current: 1 A, connection method: Screw connection, number of connections: 4, number of positions: 2, cross section: 0.2 mm-4 mm, AWG:24-12, width: 10.4 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 05/02/2021Page8/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Accessories Thermoelectric voltage terminal block pair-MTKD-E-CU/A-CU-3100091 Thermoelectric voltage terminal block pair, TC type R, nom. voltage: 400 V, nominal current: 1 A, connection method: Screw connection, number of connections: 4, number of positions: 2, cross section: 0.2 mm-4 mm, AWG:24-12, width: 10.4 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 Thermoelectric voltage terminal block pair-MTKD-S-CU/E-CU-3100101 Thermoelectric voltage terminal block pair, TC type B, nom. voltage: 400 V, nominal current: 1 A, connection method: Screw connection, number of connections: 4, number of positions: 2, cross section: 0.2 mm-4 mm, AWG:24-12, width: 10.4 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 Shield connection Shield connection-AXL SHIELD SET-2700518 Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps) Terminal marking Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579 Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50 05/02/2021Page9/10 https://www.phoenixcontact.com/us/products/2688417 I/O module-AXL F UTH8 1F-2688417 Accessories Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 05/02/2021Page10/10