TLP124 TOSHIBA Photocoupler IRED & Photo-Transistor TLP124 Programmable Controllers AC / DC-Input Module Solid-State Relays Unit: mm The TOSHIBA mini flat coupler TLP124 is a small outline coupler, suitable for surface mount assembly. TLP124 consists of a photo transistor optically coupled to an infrared emitting diode. * Collector-emitter voltage: 80 V (min) * Current transfer ratio: 100% (min) Rank BV: 200% (min) * Isolation voltage: 3750 Vrms (min) * UL-recognized: UL 1577, File No.E67349 * cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 TOSHIBA 11-4C1 Weight: 0.09g (typ.) Pin Configurations (top view) 1 6 3 4 1 : Anode 3 : Cathode 4 : Emitter 6 : Collector Start of commercial production 1988-04 (c) 2019 Toshiba Electronic Devices & Storage Corporation 1 2019-06-10 TLP124 Current Transfer Ratio Current Transfer Ratio (min) Classification (Note 1) Ta = 25C Ta = -25 to 75C Marking of Classification IF = 1 mA VCE = 0.5 V IF = 0.5 mA VCE = 1.5 V IF = 1 mA VCE = 0.5 V Rank BV 200% 100% 100% BV Standard 100% 50% 50% BV, Blank Note 1: Ex, rank BV: TLP124(BV) Note: Application type name for certification test, please use standard product type name, i, e. TLP124(BV): TLP124 Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit IF 50 mA IF/C -0.7 mA/C Peak forward current (100 s pulse, 100 pps) IFP 1 A Reverse voltage VR 5 V Diode power dissipation PD 100 mW PD/C -1.39 mW/C Tj 125 C Collector-emitter voltage VCEO 80 V Emitter-collector voltage VECO 7 V Collector current IC 50 mA Peak collector current (10 ms pulse, 100 pps) ICP 100 mA Power dissipation PC 150 mW PC/C -1.5 mW/C Tj 125 C Storage temperature range Tstg -55 to 125 C Operating temperature range Topr -55 to 100 C Tsol 260 C PT 200 mW PT/C -2.0 mW/C BVS 3750 Vrms Forward current Forward current derating LED (Ta 53C) Diode power dissipation derating (Ta 53C) Detector Junction temperature Power dissipation derating (Ta 25C) Junction temperature Lead soldering temperature (10 s) Total package power dissipation Total package power dissipation derating (Ta 25C) Isolation voltage (AC, 60 s, R.H. 60 %) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). Note 1: Device considered a two terminal device: Pins1, 3 shorted together and pins 4, 6 shorted together. (c) 2019 Toshiba Electronic Devices & Storage Corporation 2 2019-06-10 TLP124 Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage VCC 5 48 V Forward current IF 1.6 20 mA Collector current IC 1 10 mA Topr -25 75 C Operating temperature Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Electrical Characteristics (Ta = 25C) Detector LED Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse Current IR VR = 5 V 10 A Capacitance CT V = 0 V, f = 1 MHz 30 pF IC = 0.5 mA 80 V Collector-emitter breakdown voltage V(BR)CEO Emitter-collector breakdown voltage V(BR)ECO Collector dark current ICEO Capacitance collector to emitter CCE IE = 0.1 mA 7 V VCE = 48 V 10 100 nA VCE = 48 V, Ta = 85 C 2 50 A V = 0 V, f = 1 MHz 12 pF Min Typ. Max Unit 100 1200 200 1200 50 100 0.4 0.2 0.4 10 A Min Typ. Max Unit 50 % 100 % 50 % 100 % Coupled Electrical Characteristics (Ta = 25C) Characteristics Symbol Current transfer ratio Low input CTR IC/IF IC/IF(low) Test Condition IF = 1 mA, VCE = 0.5 V Rank BV IF = 0.5 mA, VCE = 1.5 V Rank BV IC = 0.5 mA, IF = 1 mA Collector-emitter saturation voltage VCE(sat) IC = 1 mA, IF = 1 mA Rank BV Off-state collector current IC(off) VF = 0.7 V, VCE = 48 V % % V Coupled Electrical Characteristics (Ta = -25 to 75C) Characteristic Symbol Current transfer ratio Low input CTR IC/IF IC/IF(low) (c) 2019 Toshiba Electronic Devices & Storage Corporation Test Condition IF = 1 mA, VCE = 0.5 V Rank BV IF = 0.5 mA, VCE = 1.5 V Rank BV 3 2019-06-10 TLP124 Isolation Characteristics (Ta = 25C) Characteristics Symbol Test Condition Capacitance (input to output) CS VS = 0 V, f = 1 MHz Isolation resistance RS VS = 500 V, R.H. 60 % Isolation voltage BVS AC, 60 s Min Typ. Max Unit 0.8 pF 5x1010 1014 3750 -- Vrms Min Typ. Max Unit 8 8 10 Switching Characteristics (Ta = 25C) Characteristics Symbol Rise time tr Fall time tf Test Condition VCC = 10 V, IC = 2 mA RL = 100 Turn-on time tON Turn-off time tOFF 8 Turn-on time tON 10 50 300 Storage time ts Turn-off time tOFF RL = 4.7 k VCC = 5 V, IF = 1.6 mA (Fig.1) s s Fig. 1 Switching time test circuit IF VCC IF ts RL VCE VCE tON (c) 2019 Toshiba Electronic Devices & Storage Corporation 4 VCC 4.5V 0.5V tOFF 2019-06-10 TLP124 IF - Ta PC - Ta 200 Allowable collector power dissipation PC (mW) Allowable forward current IF (mA) 100 80 60 40 20 0 -20 0 40 20 60 80 100 160 120 80 40 0 -20 120 0 40 20 Ambient temperature Ta (C) Pulse width 100s Ta = 25C 50 1000 300 Forward current Pulse forward current 500 100 50 30 10-3 120 I F - VF Ta = 25C 10 100 80 100 IF (mA) IFP (mA) IFP - DR 3000 60 Ambient temperature Ta (C) 10-2 10-1 100 Duty cycle ratio DR 30 10 5 3 1 0.5 0.3 0.1 0.6 0.8 1.0 1.2 1.6 1.4 1.8 Forward voltage VF (V) IFP - VFP -2.8 (mA) -2.4 IFP 1000 Pulse forward current Forward voltage temperature coefficient VF / Ta (mV / C) VF / Ta - IF -3.2 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 0.3 0.5 1 3 Forward current 5 10 IF (mA) 30 50 500 300 100 50 30 10 Pulse width 10s 5 Repetitive 3 Frequency = 100Hz 1 0.6 Ta = 25C 1.0 1.4 1.8 2.2 Pulse forward voltage VFP NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. (c) 2019 5 Toshiba Electronic Devices & Storage Corporation 2.6 3.0 (V) 2019-06-10 TLP124 IC - VCE IC - VCE 4 4 Ta = 25C IC (mA) 3 0.8mA Collector current Collector current IC (mA) IF = 1.0mA 2 0.6mA 0.5mA 1 0.4mA Ta = 25C IF = 1.0mA 3 0.8mA 2 0.6mA 0.5mA 1 0.4mA 0.2mA 0 0 2 6 4 0.2mA 8 0 0 10 0.2 0.6 0.4 0.8 1.0 Collector-emitter voltage VCE (V) Collector-emitter voltage VCE (V) ICEO - Ta IC - IF 101 50 10 100 5 ICEO (A) 3 Sample A 1 0.5 0.3 Ta = 25C VCE = 5 V VCE = 1.5 V VCE = 0.5 V Sample B 0.1 0.05 0.03 0.1 0.3 0.5 1 Forward current 3 5 10 IF (mA) VCE = 48V 24V 10V 10-1 5V 10-2 10-3 10-4 0 IC/IF - IF 1000 Collector dark current Collector current IC (mA) 30 20 40 60 80 100 120 Ambient temperature Ta (C) Ta = 25C Current transfer ratio IC / IF (%) 500 Sample A 300 Sample B 100 VCE = 5 V VCE = 1.5 V VCE = 0.5 V 50 30 0.1 0.3 0.5 1 Forward current 3 5 10 IF (mA) NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. (c) 2019 6 2019-06-10 Toshiba Electronic Devices & Storage Corporation TLP124 IC - Ta VCE(sat) - Ta 0.14 30 VCE = 1.5V VCE = 0.5V IF = 2mA 10 (mA) 0.10 0.08 Collector current IC Collector-emitter saturation voltage VCE(sat) (V) 0.12 0.06 0.04 IF = 1mA Ic = 0.5mA 0.02 0 -40 20 0 -20 40 60 80 100 5 1mA 3 0.5mA 1 0.5 0.3 0.2mA 0.1 Ambient temperature Ta (C) 0.05 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Switching Time - RL 5000 3000 Ta = 25C IF = 1.6mA VCC = 5V tOFF 1000 Switching time (s) 500 300 ts 100 50 30 tON 10 5 1 3 5 10 Load resistance RL 30 50 100 (k) NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. (c) 2019 Toshiba Electronic Devices & Storage Corporation 7 2019-06-10 TLP124 RESTRICTIONS ON PRODUCT USE Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as "TOSHIBA". Hardware, software and systems described in this document are collectively referred to as "Product". * TOSHIBA reserves the right to make changes to the information in this document and related Product without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative or contact us via our website. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. https://toshiba.semicon-storage.com/ (c) 2019 Toshiba Electronic Devices & Storage Corporation 8 2019-06-10