2EZ3.6D5 thru 2EZ200D5, e3 Silicon 2 Watt Zener Diode SCOTTSDALE DIVISION APPEARANCE The 2EZ3.6D5 thru 2EZ200D5 series of axial-leaded 2.0 watt Zeners provides voltage regulation selections with 5% tolerances from 3.6 to 200 volts in a DO-41 plastic package size. Other Zener voltage tolerances are also available by changing the suffix number to the tolerance desired such as 1 and 2 for tighter tolerances or 10 for wider tolerance. These plastic encapsulated Zeners are also available in various military equivalent screening levels by adding a prefix identifier as also described in the Features section. They may be operated at high maximum dc currents or full power rating with adequate heat. Microsemi also offers numerous other Zener products to meet higher and lower power applications. DO-41 or DO-204AL (Plastic) WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * * APPLICATIONS / BENEFITS Zener voltage available 3.6 V to 200 V Standard voltage tolerances are plus/minus 5% with a 5 suffix and 10 % with 10 suffix identification Tight tolerances available in plus or minus 2% or 1% with 2 or 1 suffix respectively Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers. Surface mount equivalents available as SMBJ2EZ3.6D5 to SMBJ2EZ200D5 in the DO-214AA package, or SMBG2EZ3.6D5 to SMBG200D5 in the DO-215AA package RoHS compliant devices available by adding "e3" suffix * * * * * * MAXIMUM RATINGS * * * * * MECHANICAL AND PACKAGING Power dissipation at 25 C: 3.0 watts (also see derating in Figure 1). Operating and Storage temperature: -65C to +150C Thermal Resistance: 45 C/W junction to lead at 3/8 (10 mm) lead length from body, or 105C/W junction to ambient when mounted on FR4 PC board (1oz Cu) with 4 mm2 copper pads and track width 1 mm, length 25 mm Steady-State Power: 2 watts at TL < 60oC 3/8 inch (10 mm) from body, or 1.19 watts at TA = 25C when mounted on FR4 PC described for thermal resistance (also see Figure 1) Forward voltage @200 mA: 1.2 volts (maximum) Solder Temperatures: 260 C for 10 s (max) Copyright (c) 2008 11-06-2008 REV C * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Leads, tin-lead or RoHS compliant annealed matte-Tin plating solderable per MILSTD-750, method 2026 POLARITY: Cathode indicated by band where diode is to be operated with the banded end positive with respect to the opposite end for Zener regulation. MARKING: Part number TAPE & REEL option: Standard per EIA-296 (add "TR" suffix to part number) WEIGHT: 0.4 grams See package dimensions on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 2EZ3.6D5 2EZ200D5, e3 * Regulates voltage over a broad operating current and temperature range Wide selection from 3.6 to 200 V Flexible axial-lead mounting terminals Nonsensitive to ESD per MIL-STD-750 Method 1020 Withstands surge stresses High specified maximum current (IZM) when adequately heat sunk 2EZ3.6D5 thru 2EZ200D5, e3 Silicon 2 Watt Zener Diode SCOTTSDALE DIVISION MICRO TYPE NUMBER (Note 1) NOMINAL ZENER VOLTAGE (Note 2) VZ @ IZT MAXIMUM ZENER IMPEDANCE (Note 3) ZZT @ IZT ZZK @ IZK MAXIMUM REVERSE CURRENT IR @ VR MAXIMUM RATED ZENER CURRENT o @ 100 C MAXIMUM SURGE CURRENT (Note 4) IZM IZSM Copyright (c) 2008 11-06-2008 REV C Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 2EZ3.6D5 2EZ200D5, e3 VOLTS mA OHMS OHMS mA VOLTS mA A A 4.6 504 1.0 80 1.0 400 5.0 139 3.6 2EZ3.6D5 4.4 468 1.0 30 1.0 400 5.0 128 3.9 2EZ3.9D5 4.1 434 1.0 20 1.0 400 4.5 116 4.3 2EZ4.3D5 3.3 386 1.0 5.0 1.0 550 4.5 106 4.7 2EZ4.7D5 3.5 356 1.0 5.0 1.0 600 3.5 98 5.1 2EZ5.1D5 3.3 324 2.0 5.0 1.0 500 2.5 89.5 5.6 2EZ5.6D5 3.1 292 3.0 5.0 1.0 700 1.5 80.5 6.2 2EZ6.2D5 2.9 266 4.0 5.0 1.0 700 2.0 73.5 6.8 2EZ6.8D5 2.66 242 5.0 5.0 0.5 700 2.0 66.5 7.5 2EZ7.5D5 2.44 220 6.0 5.0 0.5 700 2.3 61 8.2 2EZ8.2D5 2.2 200 7.0 3.0 0.5 700 2.5 55 9.1 2EZ9.1D5 2.0 182 7.6 3.0 0.25 700 3.5 50 10 2EZ10D5 1.82 166 8.4 1.0 0.25 700 4.0 45.5 11 2EZ11D5 1.66 152 9.1 1.0 0.25 700 4.5 41.5 12 2EZ12D5 1.54 138 9.9 0.5 0.25 700 5.0 38.5 13 2EZ13D5 1.43 130 10.6 0.5 0.25 700 5.5 35.7 14 2EZ14D5 1.33 122 11.4 0.5 0.25 700 7.0 33.4 15 2EZ15D5 1.25 114 12.2 0.5 0.25 700 8.0 31.2 16 2EZ16D5 1.18 107 13.0 0.5 0.25 750 9.0 29.4 17 2EZ17D5 1.11 100 13.7 0.5 0.25 750 10 27.8 18 2EZ18D5 1.05 95 14.4 0.5 0.25 750 11 26.3 19 2EZ19D5 1.0 90 15.2 0.5 0.25 750 11 25 20 2EZ20D5 0.91 82 16.7 0.5 0.25 750 12 22.8 22 2EZ22D5 0.83 76 18.2 0.5 0.25 750 13 20.8 24 2EZ24D5 0.74 68 20.6 0.5 0.25 750 18 18.5 27 2EZ27D5 0.67 60 22.5 0.5 0.25 1000 20 16.6 30 2EZ30D5 0.61 55 25.1 0.5 0.25 1000 23 15.1 33 2EZ33D5 0.56 50 27.4 0.5 0.25 1000 25 13.9 36 2EZ36D5 0.51 47 29.7 0.5 0.25 1000 30 12.8 39 2EZ39D5 0.45 43 32.7 0.5 0.25 1500 35 11.6 43 2EZ43D5 0.42 39 35.8 0.5 0.25 1500 40 10.6 47 2EZ47D5 0.39 36 38.8 0.5 0.25 1500 48 9.8 51 2EZ51D5 0.36 32 42.6 0.5 0.25 2000 55 9.0 56 2EZ56D5 0.32 29 47.1 0.5 0.25 2000 60 8.1 62 2EZ62D5 0.29 27 51.7 0.5 0.25 2000 75 7.4 68 2EZ68D5 0.27 24 56 0.5 0.25 2000 90 6.7 75 2EZ75D5 0.24 22 62.2 0.5 0.25 3000 100 6.1 82 2EZ82D5 0.22 20 69.2 0.5 0.25 3000 125 5.5 91 2EZ91D5 0.20 18 76.0 0.5 0.25 3000 175 5.0 100 2EZ100D5 0.18 17 83.6 0.5 0.25 4000 250 4.5 110 2EZ110D5 0.16 15 91.2 0.5 0.25 4500 325 4.2 120 2EZ120D5 0.15 14 98.8 0.5 0.25 5000 400 3.8 130 2EZ130D5 0.14 13 106.4 0.5 0.25 5500 500 3.6 140 2EZ140D5 0.13 12 114 0.5 0.25 6000 575 3.3 150 2EZ150D5 0.12 11 121.6 0.5 0.25 6500 650 3.1 160 2EZ160D5 0.12 11 130.4 0.5 0.25 7000 675 2.9 170 2EZ170D5 0.11 10 136.8 0.5 0.25 7000 725 2.8 180 2EZ180D5 0.10 10 144.8 0.5 0.25 8000 825 2.6 190 2EZ190D5 0.10 9 152 0.5 0.25 8000 900 2.5 200 2EZ200D5 NOTES: 1. Suffix 1 indicates +/-1% tolerance, suffix 2 indicates +/-2% tolerance, suffix 5 indicates +/-5% tolerance. Suffix 10 indicates +/-10%, no suffix indicates +/-20%. 2. The VZ is measured after allowing a 90 second stabilization period when mounted with a 3/8" minimum lead length from body. o o o Ambient temperature, TA = 25 C (+8 C/-2 C). 3. The Zener impedance is derived from 60 cycle ac voltage resulting from an ac current having an rms value equal to 10% of the dc Zener current (IZT or IZK ) is superimposed on IZT or IZK. 4. Maximum Surge Current IZSM is a non-recurrent maximum peak reverse surge with a pulse width of 8.3 ms. WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS @ 25oC 2EZ3.6D5 thru 2EZ200D5, e3 Silicon 2 Watt Zener Diode SCOTTSDALE DIVISION 110 D WWW . Microsemi .C OM 2EZ 5 % TOLERANCE 2 WATT MOLDED ZENER DIODE DEVICE NOMINAL ZENER VOLTAGE Pd, Maximum Rated Power Dissipation (mW) GRAPHS TL PACKAGE DIMENSIONS TA on FR4 PC board o TL, Lead temperature ( C) at 3/8" from body or TA on FR4 PC Board FIGURE 1 POWER DERATING CURVE 2EZ3.6D5 2EZ200D5, e3 Copyright (c) 2008 11-06-2008 REV C Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3