SPECIFICATION CONTROL DRAWING DATE: B AUG 17 2006 25.0 [0.98"] MAX oC MAX oA THREAD TYP oB MAX TYP O RING - SILICONE TYP REV: STRAIGHT ADAPTOR -00 1 3 4 2 D MAX F MAX G MAX E X A M 45 ADAPTOR 90 ADAPTOR -90 -45 (c) 2006 Tyco Electronics Corporation. All rights reserved. TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. If this document is printed it becomes uncontrolled. Check for the latest revision. HEXASHIELD ADAPTOR FOR CODE 41 CONNECTORSPLAIN CLAMPING NUT DOCUMENT NO. HEX41-AY-YY-YY-AYY-1-YY FILE-UK: File & DCR# Hex41-1scd-us D060249 SCALE: NONE SHEET: 1 OF 4 SPECIFICATION CONTROL DRAWING REV: DATE: B AUG 17 2006 KIT DESCRIPTION ITEM 1 2 3 4 DESCRIPTION BODY ASSEMBLY CLAMPING NUT - PLAIN CONIC RING STAR MATERIAL ALUMINIUM ALLOY ALUMINIUM ALLOY ALUMINIUM ALLOY ALUMINIUM ALLOY TABLE OF DIMENSIONS OA Thread UNEF 2B OB Max OC Max D Max E Max F Max G Max 09 Shell Size Ser Ser I II 09 08 0.4375"-28 11 11 10 0.5625"-24 13 13 12 0.6875"-24 15 15 14 0.8125"-20 17 17 16 0.9375"-20 19 19 18 1.0625"-18 21 21 20 1.1875"-18 23 23 22 1.3125"-18 25 25 24 1.4375"-18 19.0 [0.75"] 22.0 [0.87"] 25.5 [1.00"] 30.5 [1.20"] 33.5 [1.32"] 37.0 [1.46"] 38.5 [1.52"] 42.0 [1.65"] 46.5 [1.83"] 17.5 [0.69"] 21.5 [0.85"] 22.5 [0.89"] 25.5 [1.00"] 28.5 [1.12"] 31.5 [1.24"] 35.0 [1.38"] 38.0 [1.50"] 41.0 [1.61"] 12.5 [0.49"] 13.0 [0.51"] 14.0 [0.55"] 14.5 [0.57"] 15.0 [0.59"] 15.5 [0.61"] 16.5 [0.65"] 17.0 [0.67"] 18.0 [0.71"] 25.5 [1.00"] 26.0 [1.02"] 26.5 [1.04"] 27.5 [1.08"] 28.0 [1.10"] 28.5 [1.12"] 29.0 [1.14"] 30.0 [1.18"] 31.0 [1.22"] 16.0 [0.63"] 17.5 [0.69"] 19.0 [0.75"] 20.5 [0.81"] 22.0 [0.87"] 23.5 [0.93"] 25.5 [1.00"] 27.0 [1.06"] 28.5 [1.12"] 29.0 [1.14"] 30.5 [1.20"] 32.0 [1.26"] 33.5 [1.32"] 35.0 [1.38"] 36.5 [1.44"] 38.5 [1.52"] 40.0 [1.57"] 41.5 [1.63"] Order Number Ferrule Quantity Std. Opt. 1 2 - 3 - 5 - 6 7 7 - 9 11 10 13 12 17 TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. If this document is printed it becomes uncontrolled. Check for the latest revision. HEXASHIELD ADAPTOR FOR CODE 41 CONNECTORSPLAIN CLAMPING NUT DOCUMENT NO. HEX41-AY-YY-YY-AYY-1-YY FILE-UK: File & DCR# Hex41-1scd-us D060249 SCALE: NONE SHEET: 2 OF 4 SPECIFICATION CONTROL DRAWING REV: DATE: B AUG 17 2006 PART NUMBERING HEX41 A B 00 21 A9 1 DS - CONNECTOR CODE NUMBER HEX41 = MIL-C-38999 SERIES I AND II - MATERIAL CODE: A = ALUMINIUM ALLOY - PLATING CODE: B = CADMIUM OLIVE DRAB TO QQ-P416 C = ELECTROLESS NICKEL TO MIL-C-26074 - BODY STYLE 00 = STRAIGHT 45 = 45 90 = 90 - ORDER NUMBER - FERRULE QUANTITY CODE - 1 = PLAIN CLAMPING NUT - DS = DRILLED STAR - OPTIONAL - SEE NOTE 2 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-C-38999 Series I and II - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink moulded parts where strain relief is required - see illustration. MOULDED PART - Use in conjunction with the ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant selection details. INSTALLATION - See Installation Procedure RPIP-696-04. PACKAGING - All components are supplied in a plastic bag. TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. If this document is printed it becomes uncontrolled. Check for the latest revision. HEXASHIELD ADAPTOR FOR CODE 41 CONNECTORSPLAIN CLAMPING NUT DOCUMENT NO. HEX41-AY-YY-YY-AYY-1-YY FILE-UK: File & DCR# Hex41-1scd-us D060249 SCALE: NONE SHEET: 3 OF 4 SPECIFICATION CONTROL DRAWING REV: DATE: B AUG 17 2006 NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. oH MAX 2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 only. This option is to allow unshielded wires to pass through the assembly. STAR SIZE OD MAX 15 3.0 [0.12"] 17 6.0 [0.24"] 19 9.0 [0.35"] 21 12.0 [0.47"] 23 15.0 [0.59"] 25 18.0 [0.71"] 3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard. If the optional quantity is selected then 2 items 4 will be supplied - one "split" and the other one standard. See below for illustration. EXAMPLE: FERRULE QUANTITY CODE -A13 -A13 = -A10 SPLIT STAR + -A3 STANDARD STAR 4. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX41-AB-00-21-A9-1) TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. If this document is printed it becomes uncontrolled. Check for the latest revision. HEXASHIELD ADAPTOR FOR CODE 41 CONNECTORSPLAIN CLAMPING NUT DOCUMENT NO. HEX41-AY-YY-YY-AYY-1-YY FILE-UK: File & DCR# Hex41-1scd-us D060249 SCALE: NONE SHEET: 4 OF 4