Amphenol Battery Connector 1. Material: Pin: Copper alloy Insulator: Glass filled high temperature Engineering Plastics UL94V0, black 2. Finish: 15 mirco-inch(0.38 micron) Min gold plateing at mating area, 50-100 micro-inch(1.27-2.54 micron) pure tin at solder tail and 50-100 microinch (1.27-2.54 micron) nickel under plated. Part Number : BC5470R03001 3 Contacts Battery Connector Right Angle SMT Mounting - 6.96 mm height, 5.40 mm contact height from PCB surface - 3.73mm pitch - 1.00 mm compression height - Additional solder pad for force balance - Side compress type 3. Electrical specifications: Voltage rating: 250 Vac min Current rating: 2.0 A min Dielectric strength: 1000 Vac for 1 minute min Insulation resistance: 1000 MEG ohm min Contact resistance: 30 milliohm max Operation temperature: -55C to +125C 4. Mechanical specifications: Durability: 5,000 cycles Normal force at mated position: 60g min 5. Packaging: Parts to be packaged in anti-static tape and reel. All packaging materials to be approved by Amphenol engineering. Battery ASCA PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com