ATTENUATORS 2.9mm, DC - 18 GHz, 2 Watts SPECIFICATIONS: Models: 2112M/012, 2112F/012, 2112M/036, 2112F/036 Electrical: Frequency Range Available dB Values DC - 18 GHz 0 - 12 dB In 1 dB Increments Attenuation Accuracy 0 - 6 dB 7 - 12 dB VSWR DC - 4 GHz 4 - 12.4 GHz 12.4 - 18 GHz Input Power 0.3 dB 0.5 dB 1.15:1 Max. 1.25:1 Max. 1.50:1 Max. 2 Watts Avg. @ +25C .480 [12.19] O.625 [15.87] o Derated Linearly to 0.5 Watts @ +125 C 250 Watts Max. Peak Power (5uSec Pulse, .05% Duty Cycle) Impedance Operating Temp Range .29 [7.37] 50 Ohms -65C to +125C 2-HOLE FLANGE DETAIL - TYPICAL Mechanical: 2.9mm Connectors Passivated Stainless Steel Mates both Mechanically and Electrically with all SMA, SMK and 3.5mm Series Connectors Conductors Gold Plated Beryllium Copper Model Number: 2112F/XX 2.9mm Female Connector Model Number: 2112M/XX 2.9mm Male Connector .70.02 [17.780.51] .76.02 [19.300.51] .065 [1.65] MODEL NUMBER PIN INTERFACE 2112X/12 O.012 2112X/36 O.036 RECOMMENED INTERFACE PIN DIMENSIONS O.0120 .0005 [0.305 0.013] x .050 .005 [1.27 0.13] LONG PIN O.0360 .0005 [0.914 0.013] x .09 [2.29] MAX. LONG PIN HOW TO ORDER: Model Number: 2112X/XX-XX Connector Configuration F = 2.9mm Female M = 2.9mm Male .065 [1.65] dB Value Spherical orTapered end Recommended Ordering Examples: Model Number: 2112F/12-6 6 dB; 2.9mm Female; Accepts O.012 Pin Mating Pin Diameter 12 = O.012 PIN 36 = O.036 PIN Model Number: 2112M/36-10 10 dB; 2.9mm Male; Accepts O.036 Pin Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. Design, specifications are subject to change without notice. Contact factory for technical specifications before purchasing and/or use. 2112: REV- Aeroflex / Inmet, Inc. 300 Dino Drive, Ann Arbor, MI 48103 * U.S.A. 888-244-6638 or 734-426-5553 * FAX: 734-426-5557 www.aeroflex-inmet.com * inmetsales@aeroflex.com