Semiconductor Components Industries, LLC, 2002
January, 2002 – Rev. 7 1Publication Order Number:
LM301A/D
LM301A, LM201A
Non Compensated Single
Operational Amplifiers
A general purpose operational amplifier that allows the user to
choose the compensation capacitor best suited to his needs. With
proper compensation, summing amplifier slew rates to 10 V/µs can be
obtained.
Low Input Offset Current: 20 nA Maximum Over Temperature
Range
External Frequency Compensation for Flexibility
Class AB Output Provides Excellent Linearity
Output Short Circuit Protection
Guaranteed Drift Characteristics
Figure 1. Standard
Compensation and
Offset Balancing Circuit
Balance
VEE
VCC
Output
Inverting
Input
Balance
10 M
Freq
Compen
30 pF
VEE
20 k
+
Non-
Inverting
Input
5.1 M
VCC
VO
VUT
VIVEE
VCC
VLT
VEE
MZ4622 or Equiv.
VO
VO = 4.8 V for
VLT VI VUT
VO = -0.4 V
VI < VLT or VI > VUT
(Pins Not Shown Are Not Connected)
+
Inputs
Balance Compensation
VCC
Output
VEE
Balance
25
500
50
80 k
1.0 k
40k40k
10 k20 k5 k
450
250
3.9 V
+
Figure 2. Double–Ended
Limit Detector
Figure 3. Representative Circuit Schematic
Device Package Shipping
ORDERING INFORMATION
LM301AD SO–8 98 Units/Rail
LM301AN PDIP–8
LM201AD SO–8
PDIP–8
N SUFFIX
CASE 626
1
8
http://onsemi.com
50 Units/Rail
98 Units/Rail
SO–8
D SUFFIX
CASE 751
1
8
Compensation
VCC
Output
BalanceVEE 4
Balance 1
2
3
8
7
6
5
Inputs
(Top View)
PIN CONNECTIONS
LM201ADR2 SO–8 2500 Tape & Reel
LM301ADR2 SO–8 2500 Tape & Reel
LM201AN PDIP–8 50 Units/Rail
MARKING
DIAGRAMS
x = 2 or 3
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
1
8
LMx01AN
AWL
YYWW
ALYWA
LMx01
1
8
LM301A, LM201A
http://onsemi.com
2
MAXIMUM RATINGS
Value
Rating Symbol LM201A LM301A Unit
Power Supply Voltage VCC, VEE ±22 ±18 Vdc
Input Differential Voltage VID ±30 V
Input Common Mode Range (Note 1) VICR ±15 V
Output Short Circuit Duration tSC Continuous
Power Dissipation (Package Limitation) PD
Plastic Dual–In–Line Package 625 625 mW
Derate above TA = +25°C 5.0 5.0 mW/°C
Operating Ambient Temperature Range TA–25 to +85 0 to +70 °C
Storage Temperature Range Tstg –65 to +150 °C
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted.) Unless otherwise specified, these specifications apply
for supply voltages from ±5.0 V to ±20 V for the LM201A, and from ±5.0 V to ±15 V for the LM301A.
LM201A LM301A
Characteristic Symbol Min Typ Max Min Typ Max Unit
Input Offset Voltage (RS 50 k) VIO 0.7 2.0 2.0 7.5 mV
Input Offset Current IIO 1.5 10 3.0 50 nA
Input Bias Current IIB 30 75 70 250 nA
Input Resistance ri1.5 4.0 0.5 2.0 M
Supply Current ICC,IEE mA
VCC/VEE = ±20 V 1.8 3.0
VCC/VEE = ±15 V 1.8 3.0
Large Signal Voltage Gain AV50 160 25 160 V/mV
(VCC/VEE = ±15 V, VO = ±10 V, RL > 2.0 k)
The following specifications apply over the operating temperature range.
Input Offset Voltage (RS 50 k) VIO 3.0 10 mV
Input Offset Current IIO 20 70 nA
Avg Temperature Coefficient of Input Offset
Voltage (Note 2) VIO/T 3.0 15 6.0 30 µV/°C
TA(min) TA TA (max)
Avg Temperature Coefficient of Input Offset
Current (Note 2) IIO/T nA/°C
+25°C TA TA (max) 0.01 0.1 0.01 0.3
TA(min) TA 25°C 0.02 0.2 0.02 0.6
Input Bias Current IIB 100 300 nA
Large Signal Voltage Gain AVOL 25 15 V/mV
(VCC/VEE = ±15 V, VO = ±10V, RL > 2.0 k)
Input Voltage Range VICR V
VCC/VEE = ±20 V –15 +15
VCC/VEE = ±15 V –12 +12
Common Mode Rejection (RS 50 k) CMR 80 96 70 90 dB
Supply Voltage Rejection (RS 50 k) PSR 80 96 70 96 dB
Output Voltage Swing VO±12 ±14 ±12 ±14 V
(VCC/VEE = ±15 V, RL = ±10 kΩ, RL > 2.0 kΩ) ±10 ±13 ±10 ±13
Supply Currents (TA = TA(max), VCC/VEE = ±20 V) ICC,IEE 1.2 2.5 mA
1. For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage.
2. Guaranteed by design.
LM301A, LM201A
http://onsemi.com
3
C1 = 3.0 pF
C1 = 30 pF
Single-Pole Compensation
Figure 4. Minimum Input Voltage Range Figure 5. Minimum Output Voltage Swing
Figure 6. Minimum Voltage Gain Figure 7. Typical Supply Currents
Figure 8. Open Loop Frequency Response Figure 9. Large Signal Frequency Response
VIR, INPUT VOLTAGE RANGE (V)
VOR, OUTPUT VOLTAGE RANGE ( V)
±
AV, VOLTAGE GAIN (dB)
AV, VOLTAGE GAIN (dB)
CC EE, SUPPLY CURRENTS (mA)II,
VCC, ( -VEE), SUPPLY VOLTAGE (V) VCC, ( -VEE), SUPPLY VOLTAGE (V)
VCC, ( -VEE), SUPPLY VOLTAGE (V) VCC, ( -VEE), SUPPLY VOLTAGE (V)
f, FREQUENCY (Hz) f, FREQUENCY (Hz)
Phase
Gain
C1 = 3.0 pF
C1 = 30 pF
20
16
12
8.0
4.0
00 5.0 10 15 20
20
16
12
8.0
4.0
00 5.0 10 15 20
0 5.0 10 15 200 5.0 10 15 20
100
94
88
82
76
70
2.5
2.0
1.5
1.0
0.5
0
1.0 k 10 k 100 k 1.0 M 10 M
1.0 10 100 1.0 k 10 k 100 k 1.0 M 10 M
315
270
225
180
135
90
45
0
180
160
140
120
100
80
60
40
20
0
-20
15
10
5.0
0
Minimum
RL = 10 k
Minimum
RL = 2.0 k
TA = +25°C
Single-Pole Compensation
VOR, OUTPUT VOLTAGE RANGE ( V)
±
Negative
Positive
Applicable to the Specified
Operating Temperature
Ranges
Applicable to the Specified
Operating Temperature
Ranges
Applicable to the Specified
Operating Temperature
Ranges
LM201A
only LM201A
only
LM201A
only
LM201A
only
LM301A, LM201A
http://onsemi.com
4
Figure 10. Voltage Follower Pulse Response Figure 11. Open Loop Frequency Response
Figure 12. Large Signal Frequency Response Figure 13. Inverter Pulse Response
Figure 14. Single–Pole Compensation Figure 15. Feedforward Compensation
t, TIME (µs)
t, TIME (µs)
f, FREQUENCY (Hz)
f, FREQUENCY (Hz)
VIR, VOR VOLTAGE RANGE (
,±V)
AV, VOLTAGE GAIN (dB)
PHASE LAG (DEGREES)
10
8.0
6.0
4.0
2.0
0
-2.0
-4.0
-6.0
-8.0
-10
0 1020304050 60708090
140
120
100
80
60
40
20
0
-2010 100 1.0 k 10 k 100 k 1.0 M 10 M 100 M
10
8.0
6.0
4.0
2.0
0
-2.0
-4.0
-6.0
-8.0
-10
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.01.0 M 10 M100 k
0
18
16
12
8.0
4.0
225
180
135
90
45
0
Balance
1
4
VEE
R2
R1
R3
2
3
7
6
8
C1
VCC
VO
-VI
+VI
Frequency
Compensation
C2
R2
R1
VI
R3 C1
150 pF
Balance
VEE
VO
2
3
6
7
4
1
C2 = 1
2πfoR2
fo = 3.0 MHz
++
C1 R1 Cs
R1 +R2
Cs = 30 pF
VCC
VOR, OUTPUT VOLTAGE RANGE ( V)±
Single-Pole Compensation
Output
Input
VOR, OUTPUT VOLTAGE RANGE ( V)±
Feedforward
Compensation
0
Output
Input
Feedforward
Compensation
Phase
Gain
Feedforward
Compensation
LM301A, LM201A
http://onsemi.com
5
PACKAGE DIMENSIONS
PDIP–8
N SUFFIX
CASE 626–05
ISSUE L
NOTES:
1. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
2. PACKAGE CONTOUR OPTIONAL (ROUND OR
SQUARE CORNERS).
3. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
14
58
F
NOTE 2 –A–
–B–
–T–
SEATING
PLANE
H
J
GDK
N
C
L
M
M
A
M
0.13 (0.005) B M
T
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A9.40 10.16 0.370 0.400
B6.10 6.60 0.240 0.260
C3.94 4.45 0.155 0.175
D0.38 0.51 0.015 0.020
F1.02 1.78 0.040 0.070
G2.54 BSC 0.100 BSC
H0.76 1.27 0.030 0.050
J0.20 0.30 0.008 0.012
K2.92 3.43 0.115 0.135
L7.62 BSC 0.300 BSC
M--- 10 --- 10
N0.76 1.01 0.030 0.040

SO–8
D SUFFIX
CASE 751–07
ISSUE W
SEATING
PLANE
1
4
58
N
J
X 45
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER
SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN
EXCESS OF THE D DIMENSION AT MAXIMUM
MATERIAL CONDITION.
A
BS
D
H
C
0.10 (0.004)
DIM
A
MIN MAX MIN MAX
INCHES
4.80 5.00 0.189 0.197
MILLIMETERS
B3.80 4.00 0.150 0.157
C1.35 1.75 0.053 0.069
D0.33 0.51 0.013 0.020
G1.27 BSC 0.050 BSC
H0.10 0.25 0.004 0.010
J0.19 0.25 0.007 0.010
K0.40 1.27 0.016 0.050
M0 8 0 8
N0.25 0.50 0.010 0.020
S5.80 6.20 0.228 0.244
–X–
–Y–
G
M
Y
M
0.25 (0.010)
–Z–
Y
M
0.25 (0.010) Z SXS
M

LM301A, LM201A
http://onsemi.com
6
Notes
LM301A, LM201A
http://onsemi.com
7
Notes
LM301A, LM201A
http://onsemi.com
8
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
LM301A/D
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
N. American Technical Support: 800–282–9855 Toll Free USA/Canada