LM301A, LM201A Non Compensated Single Operational Amplifiers A general purpose operational amplifier that allows the user to choose the compensation capacitor best suited to his needs. With proper compensation, summing amplifier slew rates to 10 V/s can be obtained. * Low Input Offset Current: 20 nA Maximum Over Temperature Range * External Frequency Compensation for Flexibility * Class AB Output Provides Excellent Linearity * Output Short Circuit Protection * Guaranteed Drift Characteristics http://onsemi.com MARKING DIAGRAMS 8 PDIP-8 N SUFFIX CASE 626 8 LMx01AN AWL YYWW 1 VUT 8 + VO VEE Inverting Input NonInverting Input VI Freq Compen 10 M 30 pF 8 Balance x A WL, L YY, Y WW, W VO 5.1 M VEE 20 k 1 3.9 V VLT VEE VO = 4.8 V for VLT VI VUT VO = -0.4 V VI < VLT or VI > VUT (Pins Not Shown Are Not Connected) Figure 1. Standard Compensation and Offset Balancing Circuit Figure 2. Double-Ended Limit Detector Balance VEE Compensation = 2 or 3 = Assembly Location = Wafer Lot = Year = Work Week PIN CONNECTIONS Inputs Balance LMx01 ALYWA MZ4622 or Equiv. VEE VCC Output Balance SO-8 D SUFFIX CASE 751 1 VCC + 1 VCC VCC 1 8 Compensation 2 7 VCC 3 6 Output 4 5 Balance (Top View) Inputs + ORDERING INFORMATION 500 25 Output 50 450 40k 5k 20 k 250 10 k 40k 80 k 1.0 k Balance VEE Device Package Shipping LM301AD SO-8 98 Units/Rail LM301ADR2 SO-8 2500 Tape & Reel LM301AN PDIP-8 50 Units/Rail LM201AD SO-8 98 Units/Rail LM201ADR2 SO-8 2500 Tape & Reel PDIP-8 50 Units/Rail LM201AN Figure 3. Representative Circuit Schematic Semiconductor Components Industries, LLC, 2002 January, 2002 - Rev. 7 1 Publication Order Number: LM301A/D LM301A, LM201A MAXIMUM RATINGS Value Rating Power Supply Voltage Symbol LM201A LM301A Unit VCC, VEE 22 18 Vdc Input Differential Voltage VID 30 V Input Common Mode Range (Note 1) VICR 15 V Output Short Circuit Duration tSC Continuous Power Dissipation (Package Limitation) PD Plastic Dual-In-Line Package Derate above TA = +25C Operating Ambient Temperature Range TA Storage Temperature Range Tstg 625 5.0 625 5.0 mW mW/C -25 to +85 0 to +70 C C -65 to +150 ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise noted.) Unless otherwise specified, these specifications apply for supply voltages from 5.0 V to 20 V for the LM201A, and from 5.0 V to 15 V for the LM301A. LM201A LM301A Symbol Min Typ Max Min Typ Max Unit Input Offset Voltage (RS 50 k) VIO - 0.7 2.0 - 2.0 7.5 mV Input Offset Current IIO - 1.5 10 - 3.0 50 nA Input Bias Current IIB - 30 75 - 70 250 nA Input Resistance ri 1.5 4.0 - 0.5 2.0 - M - - 1.8 - 3.0 - - - - 1.8 - 3.0 50 160 - 25 160 - V/mV Characteristic Supply Current VCC/VEE = 20 V VCC/VEE = 15 V Large Signal Voltage Gain (VCC/VEE = 15 V, VO = 10 V, RL > 2.0 k) ICC,IEE mA AV The following specifications apply over the operating temperature range. Input Offset Voltage (RS 50 k) VIO - - 3.0 - - 10 mV Input Offset Current IIO - - 20 - - 70 nA Avg Temperature Coefficient of Input Offset Voltage (Note 2) TA(min) TA TA (max) VIO/T - 3.0 15 - 6.0 30 V/C Avg Temperature Coefficient of Input Offset Current (Note 2) +25C TA TA (max) TA(min) TA 25C IIO/T Input Bias Current nA/C - - 0.01 0.02 0.1 0.2 - - 0.01 0.02 0.3 0.6 IIB - - 100 - - 300 nA Large Signal Voltage Gain (VCC/VEE = 15 V, VO = 10V, RL > 2.0 k) AVOL 25 - - 15 - - V/mV Input Voltage Range VCC/VEE = 20 V VCC/VEE = 15 V VICR -15 - - - +15 - - -12 - - - +12 Common Mode Rejection (RS 50 k) CMR 80 96 - 70 90 - dB Supply Voltage Rejection (RS 50 k) PSR 80 96 - 70 96 - dB VO 12 10 14 13 - - 12 10 14 13 - - V ICC,IEE - 1.2 2.5 - - - mA Output Voltage Swing (VCC/VEE = 15 V, RL = 10 k, RL > 2.0 k) Supply Currents (TA = TA(max), VCC/VEE = 20 V) V 1. For supply voltages less than 15 V, the absolute maximum input voltage is equal to the supply voltage. 2. Guaranteed by design. http://onsemi.com 2 LM301A, LM201A Applicable to the Specified Operating Temperature Ranges 16 12 LM201A only Positive 8.0 Negative 4.0 0 VOR, OUTPUT VOLTAGE RANGE ( V) VIR , INPUT VOLTAGE RANGE (V) 20 0 5.0 10 15 VCC, ( -VEE), SUPPLY VOLTAGE (V) 20 Applicable to the Specified Operating Temperature Ranges 16 12 Minimum RL = 10 k 8.0 Minimum RL = 2.0 k 4.0 0 20 0 Figure 4. Minimum Input Voltage Range I CC , I EE , SUPPLY CURRENTS (mA) A V , VOLTAGE GAIN (dB) LM201A only 82 76 0 5.0 10 15 2.0 1.5 LM201A only 1.0 TA = +25C 0.5 0 20 0 5.0 Figure 6. Minimum Voltage Gain Figure 7. Typical Supply Currents A V , VOLTAGE GAIN (dB) 315 120 270 100 80 C1 = 3.0 pF 225 Phase 180 135 C1 = 30 pF 90 10 100 1.0 k 10 k 0 100 k 1.0 M 10 0 1.0 k 10 M C1 = 3.0 pF C1 = 30 pF 10 k 100 k 1.0 M f, FREQUENCY (Hz) f, FREQUENCY (Hz) Figure 8. Open Loop Frequency Response Figure 9. Large Signal Frequency Response http://onsemi.com 3 20 Single-Pole Compensation 15 5.0 45 Gain VOR, OUTPUT VOLTAGE RANGE ( V) Single-Pole Compensation 140 20 0 -20 1.0 15 VCC, ( -VEE), SUPPLY VOLTAGE (V) 160 40 10 VCC, ( -VEE), SUPPLY VOLTAGE (V) 180 60 20 2.5 Applicable to the Specified Operating Temperature Ranges 88 70 5.0 10 15 VCC, ( -VEE), SUPPLY VOLTAGE (V) Figure 5. Minimum Output Voltage Swing 100 94 LM201A only 10 M LM301A, LM201A 140 8.0 6.0 4.0 100 2.0 Input 0 -2.0 Output -4.0 -6.0 -8.0 -10 225 80 180 Phase 60 135 40 90 20 45 Gain 0 0 0 0 10 20 30 40 50 60 70 80 -20 10 90 100 1.0 k 10 k 100 k 1.0 M 10 M 100 M t, TIME (s) f, FREQUENCY (Hz) Figure 10. Voltage Follower Pulse Response Figure 11. Open Loop Frequency Response 10 VOR, OUTPUT VOLTAGE RANGE ( V) 18 VOR, OUTPUT VOLTAGE RANGE ( V) Feedforward Compensation 120 Feedforward Compensation 16 12 8.0 4.0 0 100 k 1.0 M f, FREQUENCY (Hz) 10 M Feedforward Compensation 8.0 6.0 Output 4.0 2.0 Input 0 -2.0 -4.0 -6.0 -8.0 -10 0 Figure 12. Large Signal Frequency Response 1.0 2.0 3.0 4.0 5.0 t, TIME (s) 6.0 7.0 8.0 Figure 13. Inverter Pulse Response C2 R2 -VI +VI R1 R3 7 2 3 R2 VCC 6 + 4 1 VEE Balance C1 8 R1 VI VO 7 2 R3 R1 Cs R1 +R2 4 + C1 150 pF Cs = 30 pF VCC 6 3 Frequency Compensation C1 1 VO VEE Balance C2 = 1 2foR2 fo = 3.0 MHz Figure 14. Single-Pole Compensation Figure 15. Feedforward Compensation http://onsemi.com 4 PHASE LAG (DEGREES) Single-Pole Compensation A V, VOLTAGE GAIN (dB) VIR , VOR, VOLTAGE RANGE ( V) 10 9.0 LM301A, LM201A PACKAGE DIMENSIONS PDIP-8 N SUFFIX CASE 626-05 ISSUE L 8 NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5 -B- 1 4 DIM A B C D F G H J K L M N F -A- NOTE 2 L C J -T- MILLIMETERS MIN MAX 9.40 10.16 6.10 6.60 3.94 4.45 0.38 0.51 1.02 1.78 2.54 BSC 0.76 1.27 0.20 0.30 2.92 3.43 7.62 BSC --10 0.76 1.01 INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC --10 0.030 0.040 N SEATING PLANE D M K G H 0.13 (0.005) M T A M B M SO-8 D SUFFIX CASE 751-07 ISSUE W -X- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. A 8 5 0.25 (0.010) S B 1 M Y M 4 K -Y- G C N X 45 SEATING PLANE -Z- 0.10 (0.004) H M D 0.25 (0.010) M Z Y S X S http://onsemi.com 5 J DIM A B C D G H J K M N S MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.33 0.51 1.27 BSC 0.10 0.25 0.19 0.25 0.40 1.27 0 8 0.25 0.50 5.80 6.20 INCHES MIN MAX 0.189 0.197 0.150 0.157 0.053 0.069 0.013 0.020 0.050 BSC 0.004 0.010 0.007 0.010 0.016 0.050 0 8 0.010 0.020 0.228 0.244 LM301A, LM201A Notes http://onsemi.com 6 LM301A, LM201A Notes http://onsemi.com 7 LM301A, LM201A ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 8 LM301A/D