3MTM Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC * Supports Industrial CameraLinkTM in Automated Imaging Association for camera to frame grabber communications * 11 shielded twin-ax pairs and four drain wires * Entire cable bundle is shielded with foil and braid for additional signal protection * Rugged MDR ribbon type contact * Rugged thumbscrew retention * EMI shielded junction shell in either plastic or overmolded construction * See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) Date Modified: May 18, 2011 TS-1001-C Sheet 1 of 4 Physical Connector Contact Plating Wiping Area: 30 " [ 0.76 m ] Min. Gold Shell Color: Beige Shell Material: Overmold Option: Polyvinyl Chloride (PVC); Shell Kit Option: Polyester Elastomer Cable Color: Beige Cable Jacket Material: Polyvinyl Chloride (PVC) Cable Flammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1 A Insulation Resistance: > 1 x 108 at @100 VDC Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: Conductor Size: Propogation Velocity: Skew (within pair): Skew (channel skew per chipset): 100 10 28 AWG Stranded 1.25 ns/ft [4.1 ns/m ] 50 ps/meter maximum 50 ps/meter maximum Environmental Temperature Rating: -20C to +75C UL File No.: E86982 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com CameraLink is a trademark of the Automated Imaging Association. 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC Discrete #4 - 40 Thumbscrew Shell Kit 26 Position High Density Mini D Ribbon (MDR) Male Plug 26 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See pinout for cable construction) B Version 2X Thumbscrews 2X Thumbscrews 32.5 [1.28] 32.5 [1.28] LENGTH (See ordering information) Overmold #4 - 40 Thumbscrew Shell 26 Position High Density Mini D Ribbon (MDR) Male Plug 26 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See pinout for cable construction) T Version 2X Thumbscrew 2X Thumbscrew 45.7 [1.8] mm [Inch] Tolerance Unless Noted mm 0.0 0.00 .1 .01 [ ] Dimensions for Reference only 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 45.7 [1.8] LENGTH (See ordering information) Assembly Length Tolerance Cable Length Tolerance 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length TS-1001-C Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC mm [Inch] Tolerance Unless Noted mm 0.0 0.00 .1 .01 [ ] Dimensions for Reference only B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 C Generic End Detail MDR 26 Position Plug (Both Ends) Dimensions Shell Option (see ordering information) B C T = Overmold #4-40 Thumbscrew Shell 40.2 [ 1.58 ] 14.0 [ .55 ] B = Discrete #4-40 Thumbscrew Shell Kit 39.4 [ 1.55 ] 12.8 [ .51 ] Ordering Information 14X26-SZLB-XXX-0LC Length: Shell Retention Options: B = Discrete #4-40 Thumbscrew shell kit T = Overmold #4-40 Thumbscrew shell 050 = 0.5 meters 450 = 4.5 meters 100 = 1 meters 500 = 5 meters 150 = 1.5 meters 600 = 6 meters 200 = 2 meters 700 = 7 meters 250 = 2.5 meters 800 = 8 meters 300 = 3 meters 900 = 9 meters 350 = 3.5 meters A00 = 10 meters 400 = 4 meters TS-1001-C Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC Cable Assembly and Camera Link Pinouts Camera Connector Medium and Full Configurations Base Configuration Two Channel Link Chips One Channel Link Chip + Camera Control + Serial Communication Frame Grabber Connector Channel Link Cable Name Signal (Reference only) Camera Connector Frame Grabber Connector Channel Link Signal 1 1 inner shield inner shield 1 1 inner shield 14 14 inner shield inner shield 14 14 inner shield 2 25 Y0- Pair 1- 2 25 X0- 15 12 Y0+ Pair 1+ 15 12 X0+ 3 24 Y1- Pair 2- 3 24 X1- 16 11 Y1+ Pair 2+ 16 11 X1+ 4 23 Y2- Pair 3- 4 23 X2- 17 10 Y2+ Pair 3+ 17 10 X2+ 5 22 Yclk- Pair 4- 5 22 Xclk- 18 9 Yclk+ Pair 4+ 18 9 Xclk+ 6 21 Y3- Pair 5- 6 21 X3- 19 8 Y3+ Pair 5+ 19 8 X3+ 7 20 100 ohm Pair 6+ 7 20 SerTC+ 20 7 terminated Pair 6- 20 7 SerTC- 8 19 Z0- Pair 7- 8 19 SerTFG- 21 6 Z0+ Pair 7+ 21 6 SerTFG+ 9 18 Z1- Pair 8- 9 18 CC1- 22 5 Z1+ Pair 8+ 22 5 CC1+ 10 17 Z2- Pair 9+ 10 17 CC2+ CC2- 23 4 Z2+ Pair 9- 23 4 11 16 Zclk- Pair 10- 11 16 CC3- 24 3 Zclk+ Pair 10+ 24 3 CC3+ 12 15 Z3- Pair 11+ 12 15 CC4+ 25 2 Z3+ Pair 11- 25 2 CC4- 13 13 inner shield inner shield 13 13 inner shield 26 26 inner shield inner shield 26 26 inner shield Notes: 1. All pairs are individually shielded with aluminum foil. 2. Pair shields are wrapped aluminum out and are in contact with four internal drains (logic ground). 3. Outer braid and foil (chassis ground) are isolated from inner drains (logic ground). 4. Cable assembly compatible with Camera Link Base, Medium and Full configurations. TS-1001-C Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. (c) 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.