Semiconductor Components Industries, LLC, 2000
March, 2000 – Rev. 8 1Publication Order Number:
MC74HC14A/D
MC74HC14A
Hex Schmitt-Trigger
Inverter
High–Performance Silicon–Gate CMOS
The MC74HC14A is identical in pinout to the LS14, LS04 and the
HC04. The device inputs are compatible with Standard CMOS
outputs; with pullup resistors, they are compatible with LSTTL
outputs.
The HC14A is useful to “square up” slow input rise and fall times.
Due to hysteresis voltage of the Schmitt trigger, the HC14A finds
applications in noisy environments.
•Output Drive Capability: 10 LSTTL Loads
•Outputs Directly Interface to CMOS, NMOS and TTL
•Operating Voltage Range: 2 to 6V
•Low Input Current: 1µA
•High Noise Immunity Characteristic of CMOS Devices
•In Compliance With the JEDEC Standard No. 7A Requirements
•Chip Complexity: 60 FETs or 15 Equivalent Gates
LOGIC DIAGRAM
Y1A1
A2
A3
A4
A5
A6
Y2
Y3
Y4
Y5
Y6
1
3
5
9
11
13
2
4
6
8
10
12
Y = A
Pin 14 = VCC
Pin 7 = GND
Pinout: 14–Lead Packages (Top View)
1314 12 11 10 9 8
21 34567
VCC A6 Y6 A5 Y5 A4 Y4
A1 Y1 A2 Y2 A3 Y3 GND
Device Package Shipping
ORDERING INFORMATION
MC74HC14AN PDIP–14 2000 / Box
MC74HC14AD SOIC–14
http://onsemi.com
55 / Rail
MC74HC14ADR2 SOIC–14 2500 / Reel
MARKING
DIAGRAMS
A = Assembly Location
WL or L = W afer Lot
YY or Y = Year
WW or W = Work Week
MC74HC14ADT TSSOP–14 96 / Rail
MC74HC14ADTR2 TSSOP–14 2500 / Reel
TSSOP–14
DT SUFFIX
CASE 948G
HC
14A
ALYW
1
14
1
14
PDIP–14
N SUFFIX
CASE 646 MC74HC14AN
AWLYYWW
SOIC–14
D SUFFIX
CASE 751A
1
14
HC14A
AWLYWW
L
H
FUNCTION TABLE
Inputs Outputs
A
H
L
Y
MC74HC14A
http://onsemi.com
2
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
MAXIMUM RATINGS*
ÎÎÎÎ
ÎÎÎÎ
Symbol
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Parameter
ÎÎÎÎÎ
ÎÎÎÎÎ
Value
ÎÎÎ
ÎÎÎ
Unit
ÎÎÎÎ
ÎÎÎÎ
VCC
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Supply Voltage (Referenced to GND)
ÎÎÎÎÎ
ÎÎÎÎÎ
– 0.5 to + 7.0
ÎÎÎ
ÎÎÎ
V
ÎÎÎÎ
ÎÎÎÎ
Vin
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Input Voltage (Referenced to GND)
ÎÎÎÎÎ
ÎÎÎÎÎ
– 0.5 to VCC + 0.5
ÎÎÎ
ÎÎÎ
V
ÎÎÎÎ
ÎÎÎÎ
Vout
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Output Voltage (Referenced to GND)
ÎÎÎÎÎ
ÎÎÎÎÎ
– 0.5 to VCC + 0.5
ÎÎÎ
ÎÎÎ
V
ÎÎÎÎ
ÎÎÎÎ
Iin
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Input Current, per Pin
ÎÎÎÎÎ
ÎÎÎÎÎ
±20
ÎÎÎ
ÎÎÎ
mA
ÎÎÎÎ
ÎÎÎÎ
Iout
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Output Current, per Pin
ÎÎÎÎÎ
ÎÎÎÎÎ
±25
ÎÎÎ
ÎÎÎ
mA
ÎÎÎÎ
ÎÎÎÎ
ICC
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Supply Current, VCC and GND Pins
ÎÎÎÎÎ
ÎÎÎÎÎ
±50
ÎÎÎ
ÎÎÎ
mA
ÎÎÎÎ
Î
ÎÎ
Î
ÎÎÎÎ
PD
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Î
ÎÎÎÎÎÎÎÎÎÎÎÎ
Î
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Power Dissipation in Still Air, Plastic DIP†
SOIC Package†
TSSOP Package†
ÎÎÎÎÎ
Î
ÎÎÎ
Î
ÎÎÎÎÎ
750
500
450
ÎÎÎ
Î
Î
Î
ÎÎÎ
mW
ÎÎÎÎ
ÎÎÎÎ
Tstg
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Storage Temperature Range
ÎÎÎÎÎ
ÎÎÎÎÎ
– 65 to + 150
ÎÎÎ
ÎÎÎ
_
C
ÎÎÎÎ
Î
ÎÎ
Î
ÎÎÎÎ
TL
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Î
ÎÎÎÎÎÎÎÎÎÎÎÎ
Î
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Lead Temperature, 1 mm from Case for 10 Seconds
Plastic DIP, SOIC or TSSOP Package
ÎÎÎÎÎ
Î
ÎÎÎ
Î
ÎÎÎÎÎ
260
ÎÎÎ
Î
Î
Î
ÎÎÎ
_
C
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
†Derating — Plastic DIP: – 10 mW/
_
C from 65
_
to 125
_
C
SOIC Package: – 7 mW/
_
C from 65
_
to 125
_
C
TSSOP Package: – 6.1 mW/
_
C from 65
_
to 125
_
C
For high frequency or heavy load considerations, see Chapter 2 of the ON Semiconductor High–Speed CMOS Data Book (DL129/D).
RECOMMENDED OPERATING CONDITIONS
ÎÎÎÎ
ÎÎÎÎ
Symbol
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Parameter
ÎÎÎ
ÎÎÎ
Min
ÎÎÎ
ÎÎÎ
Max
ÎÎÎ
ÎÎÎ
Unit
ÎÎÎÎ
ÎÎÎÎ
VCC
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Supply Voltage (Referenced to GND)
ÎÎÎ
ÎÎÎ
2.0
ÎÎÎ
ÎÎÎ
6.0
ÎÎÎ
ÎÎÎ
V
ÎÎÎÎ
ÎÎÎÎ
Vin, Vout
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Input Voltage, Output Voltage (Referenced to
GND)
ÎÎÎ
ÎÎÎ
0
ÎÎÎ
ÎÎÎ
VCC
ÎÎÎ
ÎÎÎ
V
ÎÎÎÎ
ÎÎÎÎ
TA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Operating Temperature Range, All Package Types
ÎÎÎ
ÎÎÎ
– 55
ÎÎÎ
ÎÎÎ
+ 125
ÎÎÎ
ÎÎÎ
_
C
ÎÎÎÎ
Î
ÎÎ
Î
Î
ÎÎ
Î
ÎÎÎÎ
tr, tf
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Î
ÎÎÎÎÎÎÎÎÎÎÎÎ
Î
Î
ÎÎÎÎÎÎÎÎÎÎÎÎ
Î
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Input Rise/Fall T ime VCC = 2.0 V
(Figure 1) VCC = 4.5 V
VCC = 6.0 V
ÎÎÎ
Î
Î
Î
Î
Î
Î
ÎÎÎ
0
0
0
ÎÎÎ
Î
Î
Î
Î
Î
Î
ÎÎÎ
No Limit*
No Limit*
No Limit*
ÎÎÎ
Î
Î
Î
Î
Î
Î
ÎÎÎ
ns
*When Vin = 50% VCC, ICC > 1mA
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this high–impedance cir-
cuit. For proper operation, Vin and
Vout should be constrained to the
range GND
v
(Vin or V out)
v
VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
MC74HC14A
http://onsemi.com
3
DC CHARACTERISTICS (Voltages Referenced to GND)
VCC
Guaranteed Limit
Symbol Parameter Condition
VCC
V–55 to 25°C≤85°C≤125°C Unit
VT+ max Maximum Positive–Going Input
Threshold Voltage
(Figure 3)
Vout = 0.1V
|Iout| ≤ 20µA2.0
3.0
4.5
6.0
1.50
2.15
3.15
4.20
1.50
2.15
3.15
4.20
1.50
2.15
3.15
4.20
V
VT+ min Minimum Positive–Going Input
Threshold Voltage
(Figure 3)
Vout = 0.1V
|Iout| ≤ 20µA2.0
3.0
4.5
6.0
1.0
1.5
2.3
3.0
0.95
1.45
2.25
2.95
0.95
1.45
2.25
2.95
V
VT– max Maximum Negative–Going Input
Threshold Voltage
(Figure 3)
Vout = VCC – 0.1V
|Iout| ≤ 20µA2.0
3.0
4.5
6.0
0.9
1.4
2.0
2.6
0.95
1.45
2.05
2.65
0.95
1.45
2.05
2.65
V
VT– min Minimum Negative–Going Input
Threshold Voltage
(Figure 3)
Vout = VCC – 0.1V
|Iout| ≤ 20µA2.0
3.0
4.5
6.0
0.3
0.5
0.9
1.2
0.3
0.5
0.9
1.2
0.3
0.5
0.9
1.2
V
VHmax
Note 2 Maximum Hysteresis Voltage
(Figure 3) Vout = 0.1V or VCC – 0.1V
|Iout| ≤ 20µA2.0
3.0
4.5
6.0
1.20
1.65
2.25
3.00
1.20
1.65
2.25
3.00
1.20
1.65
2.25
3.00
V
VHmin
Note 2 Minimum Hysteresis Voltage
(Figure 3) Vout = 0.1V or VCC – 0.1V
|Iout| ≤ 20µA2.0
3.0
4.5
6.0
0.20
0.25
0.40
0.50
0.20
0.25
0.40
0.50
0.20
0.25
0.40
0.50
V
VOH Minimum High–Level Output
Voltage Vin ≤ VT– min
|Iout| ≤ 20µA2.0
4.5
6.0
1.9
4.4
5.9
1.9
4.4
5.9
1.9
4.4
5.9
V
Vin ≤VT– min |Iout| ≤ 2.4mA
|Iout| ≤ 4.0mA
|Iout| ≤ 5.2mA
3.0
4.5
6.0
2.48
3.98
5.48
2.34
3.84
5.34
2.20
3.70
5.20
VOL Maximum Low–Level Output
Voltage Vin ≥ VT+ max
|Iout| ≤ 20µA2.0
4.5
6.0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
V
Vin ≥VT+ max |Iout| ≤ 2.4mA
|Iout| ≤ 4.0mA
|Iout| ≤ 5.2mA
3.0
4.5
6.0
0.26
0.26
0.26
0.33
0.33
0.33
0.40
0.40
0.40
Iin Maximum Input Leakage
Current Vin = VCC or GND 6.0 ±0.1 ±1.0 ±1.0 µA
ICC Maximum Quiescent Supply
Current (per Package) Vin = VCC or GND
Iout = 0µA6.0 1.0 10 40 µA
1. Information on typical parametric values along with frequency or heavy load considerations can be found in Chapter 2 of the ON
Semiconductor High–Speed CMOS Data Book (DL129/D).
2. VHmin > (VT+ min) – (VT– max); VHmax = (VT+ max) – (VT– min).
MC74HC14A
http://onsemi.com
4
AC CHARACTERISTICS (CL = 50pF, Input tr = tf = 6ns)
VCC
Guaranteed Limit
Symbol Parameter
VCC
V–55 to 25°C≤85°C≤125°C Unit
tPLH,
tPHL Maximum Propagation Delay, Input A or B to Output Y
(Figures 1 and 2) 2.0
3.0
4.5
6.0
75
30
15
13
95
40
19
16
110
55
22
19
ns
tTLH,
tTHL Maximum Output T ransition Time, Any Output
(Figures 1 and 2) 2.0
3.0
4.5
6.0
75
27
15
13
95
32
19
16
110
36
22
19
ns
Cin Maximum Input Capacitance 10 10 10 pF
NOTE: For propagation delays with loads other than 50 pF, and information on typical parametric values, see Chapter 2 of the ON
Semiconductor High–Speed CMOS Data Book (DL129/D).
Typical @ 25°C, VCC = 5.0 V
CPD Power Dissipation Capacitance (Per Inverter)* 22 pF
*Used to determine the no–load dynamic power consumption: PD = CPD VCC2f + ICC VCC. For load considerations, see Chapter 2 of the
ON Semiconductor High–Speed CMOS Data Book (DL129/D).
Figure 1. Switching Waveforms
GND
VCC
OUTPUT Y
INPUT A
CL*
*Includes all probe and jig capacitance
TEST
POINT
90%
50%
10%
tTLH
DEVICE
UNDER
TEST
OUTPUT
Figure 2. Test Circuit
tTHL
90%
50%
10%
tPLH tPHL
t
f
t
r
MC74HC14A
http://onsemi.com
5
VHtyp
Figure 3. Typical Input Threshold, VT+, VT– versus Power Supply Voltage
Figure 4. Typical Schmitt–Trigger Applications
VCC, POWER SUPPLY VOLTAGE (VOLTS)
23456
1
2
3
4
VT, TYPICAL INPUT THRESHOLD VOLT AGE (VOLT
S
VHtyp = (VT+ typ) – (VT– typ)
(VT+)
(VT–)
VH
Vin
Vout
VCC
VT+
VT–
GND
VOH
VOL
VH
Vin
Vout
VCC
VT+
VT–
GND
VOH
VOL
(a) A Schmitt–Trigger Squares Up Inputs With Slow Rise and Fall Times (b) A Schmitt–Trigger Offers Maximum Noise Immunity
YA
MC74HC14A
http://onsemi.com
6
PACKAGE DIMENSIONS
PDIP–14
N SUFFIX
CASE 646–06
ISSUE L NOTES:
1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE
POSITION AT SEATING PLANE AT MAXIMUM
MATERIAL CONDITION.
2. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
3. DIMENSION B DOES NOT INCLUDE MOLD
FLASH.
4. ROUNDED CORNERS OPTIONAL.
17
14 8
B
A
F
HG D K
C
N
L
J
M
SEATING
PLANE
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.715 0.770 18.16 19.56
B0.240 0.260 6.10 6.60
C0.145 0.185 3.69 4.69
D0.015 0.021 0.38 0.53
F0.040 0.070 1.02 1.78
G0.100 BSC 2.54 BSC
H0.052 0.095 1.32 2.41
J0.008 0.015 0.20 0.38
K0.115 0.135 2.92 3.43
L0.300 BSC 7.62 BSC
M0 10 0 10
N0.015 0.039 0.39 1.01
____
SOIC–14
D SUFFIX
CASE 751A–03
ISSUE F NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
–A–
–B–
G
P7 PL
14 8
71 M
0.25 (0.010) B M
S
B
M
0.25 (0.010) A S
T
–T–
F
RX 45
SEATING
PLANE D14 PL K
C
J
M
_
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A8.55 8.75 0.337 0.344
B3.80 4.00 0.150 0.157
C1.35 1.75 0.054 0.068
D0.35 0.49 0.014 0.019
F0.40 1.25 0.016 0.049
G1.27 BSC 0.050 BSC
J0.19 0.25 0.008 0.009
K0.10 0.25 0.004 0.009
M0 7 0 7
P5.80 6.20 0.228 0.244
R0.25 0.50 0.010 0.019
____
MC74HC14A
http://onsemi.com
7
PACKAGE DIMENSIONS
TSSOP–14
DT SUFFIX
CASE 948G–01
ISSUE O
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A4.90 5.10 0.193 0.200
B4.30 4.50 0.169 0.177
C––– 1.20 ––– 0.047
D0.05 0.15 0.002 0.006
F0.50 0.75 0.020 0.030
G0.65 BSC 0.026 BSC
H0.50 0.60 0.020 0.024
J0.09 0.20 0.004 0.008
J1 0.09 0.16 0.004 0.006
K0.19 0.30 0.007 0.012
K1 0.19 0.25 0.007 0.010
L6.40 BSC 0.252 BSC
M0 8 0 8
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH
OR GATE BURRS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED
0.25 (0.010) PER SIDE.
5. DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN
EXCESS OF THE K DIMENSION AT MAXIMUM
MATERIAL CONDITION.
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7. DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE –W–.
____
S
U0.15 (0.006) T
2X L/2
S
U
M
0.10 (0.004) V S
T
L–U–
SEATING
PLANE
0.10 (0.004)
–T–
ÇÇ
ÇÇ
SECTION N–N
DETAIL E
JJ1
K
K1
ÉÉ
ÉÉ
DETAIL E
F
M
–W–
0.25 (0.010)
8
14
7
1
PIN 1
IDENT.
H
G
A
D
C
B
S
U0.15 (0.006) T
–V–
14X REFK
N
N
MC74HC14A
http://onsemi.com
8
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly , any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Af firmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor , Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–8549
Phone: 81–3–5740–2745
Email: r14525@onsemi.com
ON Semiconductor Website : http://onsemi.com
For additional information, please contact your local
Sales Representative.
MC74HC14A/D
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver , Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (M–F 1:00pm to 5:00pm Munich T ime)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (M–F 1:00pm to 5:00pm Toulouse Time)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (M–F 12:00pm to 5:00pm UK Time)
Email: ONlit@hibbertco.com
EUROPEAN T OLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, England, Ireland
